GTMEDIA Forum

have the same problem in the eastern U.S.A with my 8 foot dish but no problem with my 12 foot dish. Well that's good to know and thanks for the reply. .... so my problem is my dish size, I have a 6 ft, 8 ft, and a 10 ft. OK, Being in AZ, I will have to start with my 8 ft dish and hope that works as...

Newsmax moved from G14 (30) 125w and TP 3900 was removed. Newsmax was moved to G13 127w TP 4140 H 30000, I can get it in the clear late at night around 10 pm pacific time until 4:35 am then the channel starts to re-encrypt and by 4:50 am audio and video is gone, signal drops tp 69% and quality is at...

iq180 That's a nice trick, I found that when I cocked the LNBF in the scalar ring as far as it could go at an angle, I could get some transponders in the clear, but the ones I watched the most were gone, so I broke down and got the new LNBF, just to get back to watching tv again.

Finally I got my picture and sound back in the clear, after getting a new linear actuator, and 2 more lnbf's, which didn't help, I got a Titanium Satellite C138 LNBF with 5G filter and all is well... I Thanks all who responded to the problem.

Yep, I bump the dish both ways on every sat and every channel, NO JOY!!!

Update, 23 hours spent on realigning my dish, azimuth 6 times, elevation 15 times, declination 16 times, using a digital and old style angle finders, it truly is amazing the difference between the degree readout of the instruments. I went through 3 different LNBF's and realigning them in different o...

Thanks for the info Cpr43, It can't be shipped to the US, Mexico in fine though. What I have found is that 5G could be the problem, and there is an LNBF with a 5G Filter to cut back on the interference that I will be looking into. Things have calmed down some on my system using my old BSC 421 but 12...

Lineman, I finally got 4080 to come in but all HD channels were so pixelated and audio was a mess, but the USA SD Channel came in with wide green lines and lavender splotches. 125 west has the most problems and the rest on my sat list is tolerable but still a slight mess. I am using my ole BSC 421 L...

OK my internet is back up, using my BSC 421 LNB, transponder 4080 is at 78% signal and 72% quality but no audio or video. 4120 is up and at 72% but most of the time the quality is unstable, bouncing from 10% to 74%, 3900 and 3960 are bouncing up and down but watchable. Installed a Titanium Satellite...

Thank you for the reply,.....Yes I checked that too, but what I really need to know is how to input my wifi password, I can't remember how I did it last time...

No I am not using a switch, I always turn off the receiver when I make a change. When I turned on my system this morning all I got was pixelating video and chattering audio on TP 4080 125 west, as the day progressed now all the sats in my list and all channels are doing the same thing, even FTA chan...

Perfect, Thank You Owen....

How is the channel list backed,? How is it done?

Thanks for the info, I too am in AZ, all I can figure is that my equipment is failing in some way.

I am getting a 70% signal and 0% quality on Galaxy 14 125 W. TP 4080, I had to replace my LNBF just to get a non-pixelated picture on FTA TP's. Is anyone else have any problems with Galaxy 14 125W?

Thank you.

Got a new V8 UHD and I would like to get 101 west and 103 west PV keys.
Thanks for any assistance.

Right off hand... 103 W 4040 H 30000, 3840 H 30000 both of these are not receiving, 3740 V 30000 is working just fine.

Some of the FTA marked channels come in fine and others do not come in at all, and some are pixelated, is there some kind of encryption going on with those transponders? I have the same problem with my V7 Max.

Received my new switchable SCART adapter, and all is working great!

Thanks for the schematic, I will check the direction with it...
OK, the adapter is an IN not an out. got to watch those ebay sellers...

So far nothing has got the SCART output working, all I can think of is the present adapter is not working, new one with in/out switch will be here next mid week.

Well, I have had no luck with your suggestions, my SCART adapter has no switch on it so I ordered one with a switch just in case. I had used this setup for years with my V-Max 7 with no problems at all. I was hoping it would work with the V8 UHD. Thanks for your reply, have a great day...

I have a wireless transmitter and several wireless receivers hooked to my TV's in other room, as to avoid running TV cable to each TV. The connection to the transmitter is RCA Plugs (Composite), so I got a SCART adapter with RCA plugs to plug into the back of my V8 UHD STB with intention of sending ...

Thanks for the info, I had no idea things could get so easy....