FREESAT V7 do not work!?!?

V7 TT Pro / V7S HD /V7 Plus/V7 S2X /V7PRO/ V7 TT

Moderators: admin, GTMedia Team

Post Reply
Maks
Posts: 17
Joined: Mon Aug 15, 2016 5:01 am

FREESAT V7 do not work!?!?

Post by Maks »

google translation
Hey. When switching to new software from GTMEDIA V7, the old FREESAT V7 stb receivers do not work well and do not work correctly. Do all of them or how to fix it ???

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: FREESAT V7 do not work!?!?

Post by cpr43 »

Do a Factory reset and re-install the latest file again.

rafamas1
Posts: 24
Joined: Fri Dec 14, 2018 6:47 am

Re: FREESAT V7 do not work!?!?

Post by rafamas1 »

My V/HD was working fine until last month.
First it crashed after 40 min. running.
I updated to the last firmware 11/12/2018 and "usb wifi not connected" message all the time.
Power ON an OFF does not solve the problem and unplugging the usb wifi either.
What can I do?

Thanks.

Maks
Posts: 17
Joined: Mon Aug 15, 2016 5:01 am

Re: FREESAT V7 do not work!?!?

Post by Maks »

cpr43 wrote:Do a Factory reset and re-install the latest file again.
All reset to the factory Freesat v7 after updating to the software from GTmedia constantly reboots!?!?!? On older software from Freesat works correctly. Software developers make normal software for FREESAT V7!

Maks
Posts: 17
Joined: Mon Aug 15, 2016 5:01 am

Re: FREESAT V7 do not work!?!?

Post by Maks »

Especially Freesat v7 doesn’t really work on new GTmedia software from diseqc 1.1 (DS81), who try and write off.

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: FREESAT V7 do not work!?!?

Post by Feralkiwi »

Maks wrote:Especially Freesat v7 doesn’t really work on new GTmedia software from diseqc 1.1 (DS81), who try and write off.
Are you having problems with DiSEqC 1.1 switching?

Is the 1.1 switch reverting to port 1?
I also use 1.1 and 1.0 switching.
I found some years back that the power surge when the 1.1 port is selected (powers on the second switch and LNB) trips the over current protection, which resets the 1.1 switch to port 1.

I fixed this by adding a signal splitter or tone satfinder in the LNB cable at the box.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

Post Reply

Return to “GTMEDIA V7 SERIES”