V7 tt nagravision problem.

Nagyhazi19 · Post by **Nagyhazi19** » Wed Apr 20, 2022 6:18 pm

V7 tt crashes when switching channels after entering the nagravision code. The firmware for April 2021 was good. However, the 2022 firmware is bad.

STRETCH · Post by **STRETCH** » Wed Apr 20, 2022 8:21 pm

Did the (Nagravision) work with the software from April 2021.

Den

Nagyhazi19 · Post by **Nagyhazi19** » Thu Apr 21, 2022 4:30 am

April was good. Not good now. Don't let the April firmware back.

Post by **Feralkiwi** » Thu Apr 21, 2022 5:48 am

Nagyhazi19 wrote: ↑
Thu Apr 21, 2022 4:30 am
April was good. Not good now. Don't let the April firmware back.

You can go back to the older software using the forced recovery method.

Owen

Nagyhazi19 · Post by **Nagyhazi19** » Fri Apr 22, 2022 12:56 pm

Thank you. It's good.

SK8PT · Post by **SK8PT** » Wed Jun 28, 2023 2:50 pm

Hi,

You was able to downgrade the firmware version to V266 (April version)?
I cant force upgrade.. The screen shows FUPg...

Thanks.

STRETCH · Post by **STRETCH** » Wed Jun 28, 2023 3:14 pm

V266 is in the Download section.

Den

Post by **Feralkiwi** » Wed Jun 28, 2023 8:35 pm

Try the forced recovery with a capital F, Flash.bin

Owen

SK8PT · Post by **SK8PT** » Mon Jul 03, 2023 9:35 am

I tried with a capital F, Flash.bin with different usb pen but same thing.. FUPg and restarts..

Any other solution?

Post by **Feralkiwi** » Tue Jul 04, 2023 8:26 am

Try with older versions of the software with the flash.bin recovery.

If you can please attach a photo of the FUPg screen?

Owen

SK8PT · Post by **SK8PT** » Tue Jul 04, 2023 9:30 am

Im trying with the older version available here on the forum, the V266.
Have other older versions?

Here the photo:

Thanks.

Post by **Feralkiwi** » Tue Jul 04, 2023 8:50 pm

Thanks.
That is FUP9.

You may need to try the RS232 recovery method.

Owen

V8x RS232 pin info
Refresh tool.

GTMEDIA Forum