GTMEDIA Forum

Posted: **Wed Apr 20, 2022 6:18 pm**

V7 tt crashes when switching channels after entering the nagravision code. The firmware for April 2021 was good. However, the 2022 firmware is bad.

Posted: **Wed Apr 20, 2022 8:21 pm**

Did the (Nagravision) work with the software from April 2021.

Den

Posted: **Thu Apr 21, 2022 4:30 am**

April was good. Not good now. Don't let the April firmware back.

Posted: **Thu Apr 21, 2022 5:48 am**

Nagyhazi19 wrote: ↑
Thu Apr 21, 2022 4:30 am
April was good. Not good now. Don't let the April firmware back.

You can go back to the older software using the forced recovery method.

Owen

Posted: **Fri Apr 22, 2022 12:56 pm**

Thank you. It's good.

Posted: **Wed Jun 28, 2023 2:50 pm**

Hi,

You was able to downgrade the firmware version to V266 (April version)?
I cant force upgrade.. The screen shows FUPg...

Thanks.

Posted: **Wed Jun 28, 2023 3:14 pm**

V266 is in the Download section.

Den

Posted: **Wed Jun 28, 2023 8:35 pm**

Try the forced recovery with a capital F, Flash.bin

Owen

Posted: **Mon Jul 03, 2023 9:35 am**

I tried with a capital F, Flash.bin with different usb pen but same thing.. FUPg and restarts..

Any other solution?

Posted: **Tue Jul 04, 2023 8:26 am**

Try with older versions of the software with the flash.bin recovery.

If you can please attach a photo of the FUPg screen?

Owen

Posted: **Tue Jul 04, 2023 9:30 am**

Im trying with the older version available here on the forum, the V266.
Have other older versions?

Here the photo:

Thanks.

Posted: **Tue Jul 04, 2023 8:50 pm**

Thanks.
That is FUP9.

You may need to try the RS232 recovery method.

Owen

V8x RS232 pin info
Refresh tool.

V7 tt nagravision problem.