Hello,
After upgrading my V7 Combo to version: FREESAT_V7COMBO-ATSC_20170807, I am having a problem with the "moving dish" message popping up every couple of seconds. I think it started after selecting USALS on 125 West. Anyone know of a fix or work around?
Thank you...
Weird problem after upgrade to firmware
Moderators: admin, GTMedia Team
Re: Weird problem after upgrade to firmware
hi how do i upgrade the free sat golden v 8 and can this pick up us satelites 110 and 119
Re: Weird problem after upgrade to firmware
Hi Kirk,
you need to find the proper .bin (maybe ZIPped) file for your receiver, put it in the root folder on a USB flash stick. When you insert the stick into the receiver it will see the file and confirm that you want to upgrade. Be sure to backup your V8 first. I think that the files may be overwritten, so save them to a PC first.
Lorax..
you need to find the proper .bin (maybe ZIPped) file for your receiver, put it in the root folder on a USB flash stick. When you insert the stick into the receiver it will see the file and confirm that you want to upgrade. Be sure to backup your V8 first. I think that the files may be overwritten, so save them to a PC first.
Lorax..
Re: Weird problem after upgrade to firmware
Oh, I do not know about 110 & 119..
Re: Weird problem after upgrade to firmware
110 and 119 support only with turbo frec, freesat do not have turbo freckirk wrote:hi how do i upgrade the free sat golden v 8 and can this pick up us satelites 110 and 119
Re: Weird problem after upgrade to firmware
There is some newer firmware available that "may" address the "moving dish" issue. What you list in your post was released back in August and there is an October firmware available down in the download section.Lorax wrote:Hello,
After upgrading my V7 Combo to version: FREESAT_V7COMBO-ATSC_20170807, I am having a problem with the "moving dish" message popping up every couple of seconds. I think it started after selecting USALS on 125 West. Anyone know of a fix or work around?
Thank you...
I'd backup your "stuff" and try that new one to see if that fixes it.
Re: Weird problem after upgrade to firmware
You could go to MENU - SYSTEM - OTHER - DEVICE POP MESSAGE
and change this to OFF.
DEN
and change this to OFF.
DEN
Re: Weird problem after upgrade to firmware
I updated it again and solved it
Re: Weird problem after upgrade to firmware
I should have specified I have a V7 Combo ATSC. I tried it again and same problem. I tried a newer file that was named V7 combo, and the receiver puked on it! The 7/8/17 file is the newest I can find for the ATSC version.
Can I use the factory firmware if I get the key file?
Thanks...
Can I use the factory firmware if I get the key file?
Thanks...