GTMEDIA_V8 Series Bug Tracking System
Moderators: admin, GTMedia Team
Re: GTMEDIA_V8 Series Bug Tracking System
All problems found by now on the GTMEDIA V8 UHD receiver
Gtmedia V8 UHD issues:
Microfreeze images in combo channels and on some satellite channels too
Sometimes remote control delay reaction
Subtitles center-middle position, they are not posicionated center down
The function epg doesn´t work in 95% channels (61w, 70w, 81w), in v7 plus works perfectly
When you remane (change the name) of a favourite list, then you can´t use it in sat>ip app in that category of favourite you make
When you play an usb video you can´t fast or rewand visually the image (you dont know in witch part of the movie you are)
Legend speed when you plug usb device "device speed too low to record"
Sometimes legend volume stays on screen and you must buttom exit to close
I hope you can fix most of these notorious issues in the upcoming firmware, thank you very much!
Gtmedia V8 UHD issues:
Microfreeze images in combo channels and on some satellite channels too
Sometimes remote control delay reaction
Subtitles center-middle position, they are not posicionated center down
The function epg doesn´t work in 95% channels (61w, 70w, 81w), in v7 plus works perfectly
When you remane (change the name) of a favourite list, then you can´t use it in sat>ip app in that category of favourite you make
When you play an usb video you can´t fast or rewand visually the image (you dont know in witch part of the movie you are)
Legend speed when you plug usb device "device speed too low to record"
Sometimes legend volume stays on screen and you must buttom exit to close
I hope you can fix most of these notorious issues in the upcoming firmware, thank you very much!
Re: GTMEDIA_V8 Series Bug Tracking System
Microfreezing occurs in satellite in 97e gsat ku band satellite tp 11492 v 2600. Despite very strong signal the channel freezes for few seconds and again becomes normal and this process repeats after 10 seconds . It is really irritating. Please fix this bug in the next update.
Secondly satellite search mainly 5150 Freq and universal Freq 9750 10600 takes lot of time to complete search process. Earlier used to take less than 4 minutes for complete searching process now takes atleast 8mins. Eg: asiasat 5 100e cband, airtel 108e kuband, paksat 38e cband.
Hope to see this problem solved in the next update.
Ovi bhai.
Secondly satellite search mainly 5150 Freq and universal Freq 9750 10600 takes lot of time to complete search process. Earlier used to take less than 4 minutes for complete searching process now takes atleast 8mins. Eg: asiasat 5 100e cband, airtel 108e kuband, paksat 38e cband.
Hope to see this problem solved in the next update.
Ovi bhai.
Re: GTMEDIA_V8 Series Bug Tracking System
thank you very much.yayadie wrote: ↑Sat Sep 04, 2021 6:18 pmAll problems found by now on the GTMEDIA V8 UHD receiver
Gtmedia V8 UHD issues:
Microfreeze images in combo channels and on some satellite channels too
Sometimes remote control delay reaction
Subtitles center-middle position, they are not posicionated center down
The function epg doesn´t work in 95% channels (61w, 70w, 81w), in v7 plus works perfectly
When you remane (change the name) of a favourite list, then you can´t use it in sat>ip app in that category of favourite you make
When you play an usb video you can´t fast or rewand visually the image (you dont know in witch part of the movie you are)
Legend speed when you plug usb device "device speed too low to record"
Sometimes legend volume stays on screen and you must buttom exit to close
I hope you can fix most of these notorious issues in the upcoming firmware, thank you very much!
we are checking these issues.and plan to fix them.
Re: GTMEDIA_V8 Series Bug Tracking System
hello, i very much like v8-uhd i only use it for satellite only.
i see message "moving dish..." for long time. can this message be fix for short time?
thanks
i see message "moving dish..." for long time. can this message be fix for short time?
thanks
V8 Golden / V8 Novas / V8X/ GTC / V8 UHD
Re: GTMEDIA_V8 Series Bug Tracking System
better to put a swich to turn on or off.
Re: GTMEDIA_V8 Series Bug Tracking System
I think there is an option in menus to turn off all massages.
You can still press exit to clear it.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: GTMEDIA_V8 Series Bug Tracking System
Good afternoom. I have a V8x with the latest update V289_20210923 and I see that it has an error or detail, I have 3 satellites in my v8x, amazonas, star one and tupac katari, and all 3 show me the same intensity and quality, 95 intensity and 85 quality . I don't think this is normal.
--------------------
Gtmedia V8X Diseqc 4*1, Amazonas 61° W, Star One C2 70° W, Túpac Katari 87.2° W
Gtmedia V8X Diseqc 4*1, Amazonas 61° W, Star One C2 70° W, Túpac Katari 87.2° W
Re: GTMEDIA_V8 Series Bug Tracking System
Same on my 23 c-band sats from 133 to 81 west all c-band show 95/85. Ku band not getting any signal.
All this on my v8x
Plugged my v8uhd and got the normal strengths and ku works fine.
Some problem in the latest file.
All this on my v8x
Plugged my v8uhd and got the normal strengths and ku works fine.
Some problem in the latest file.
Re: GTMEDIA_V8 Series Bug Tracking System
Hi Tom...
Do you know when they will release another firmware that fixes what is still missing? With the last one, few things were solved, at least in my experience ... Many thanks
Another perceived problem, it happens to me with the satellite arsat2 (81w) the audio is ahead with the video. The solution is to change the channel and go back to the previous one and if it doesn't work I have to restart the receiver.
Do you know when they will release another firmware that fixes what is still missing? With the last one, few things were solved, at least in my experience ... Many thanks
Another perceived problem, it happens to me with the satellite arsat2 (81w) the audio is ahead with the video. The solution is to change the channel and go back to the previous one and if it doesn't work I have to restart the receiver.
Tom.w wrote: ↑Wed Sep 08, 2021 7:03 amthank you very much.yayadie wrote: ↑Sat Sep 04, 2021 6:18 pmAll problems found by now on the GTMEDIA V8 UHD receiver
Gtmedia V8 UHD issues:
Microfreeze images in combo channels and on some satellite channels too
Sometimes remote control delay reaction
Subtitles center-middle position, they are not posicionated center down
The function epg doesn´t work in 95% channels (61w, 70w, 81w), in v7 plus works perfectly
When you remane (change the name) of a favourite list, then you can´t use it in sat>ip app in that category of favourite you make
When you play an usb video you can´t fast or rewand visually the image (you dont know in witch part of the movie you are)
Legend speed when you plug usb device "device speed too low to record"
Sometimes legend volume stays on screen and you must buttom exit to close
I hope you can fix most of these notorious issues in the upcoming firmware, thank you very much!
we are checking these issues.and plan to fix them.
-
- Posts: 23
- Joined: Wed Jan 18, 2017 12:24 am
Re: GTMEDIA_V8 Series Bug Tracking System
Boa dia pessoal, meu v8nova blue está com pequenas travas nos canais powervu
principalmente na tp 4095 R 30000 mux da fox do ses6 e tp 3720 V 30000 mux da fox
intelsat 21, tem como corrigir isso?
principalmente na tp 4095 R 30000 mux da fox do ses6 e tp 3720 V 30000 mux da fox
intelsat 21, tem como corrigir isso?
Re: GTMEDIA_V8 Series Bug Tracking System
Hellomaylon1000 wrote: ↑Sun Nov 07, 2021 11:38 amBoa dia pessoal, meu v8nova blue está com pequenas travas nos canais powervu
principalmente na tp 4095 R 30000 mux da fox do ses6 e tp 3720 V 30000 mux da fox
intelsat 21, tem como corrigir isso?
Try doing a factory reset. First do a backup or dump to your USB of all your settings/ channels. Re-install the latest bin file from V.519 (05/08/2021)
from here and re-install you DB backup
viewtopic.php?f=40&t=9460
-
- Posts: 23
- Joined: Wed Jan 18, 2017 12:24 am
Re: GTMEDIA_V8 Series Bug Tracking System
Boa tarde amigo, já fiz esse procedimento mas não resolveu, talvez sejá algum bug do firmware.
Agradeço sua atenção, obrigado.
Agradeço sua atenção, obrigado.
Re: GTMEDIA_V8 Series Bug Tracking System
What is your signal levels like on the said transponders.
Den
Den
-
- Posts: 23
- Joined: Wed Jan 18, 2017 12:24 am
Re: GTMEDIA_V8 Series Bug Tracking System
Boa tarde Strech.
tp 4095 R 30000 ses6, sinal 93 qualidade 80
tp 3720 V 30000 int 21, sinal 86 qualidade 72
Tenho um v7 HD testei nessas tp e funciona liso.
tp 4095 R 30000 ses6, sinal 93 qualidade 80
tp 3720 V 30000 int 21, sinal 86 qualidade 72
Tenho um v7 HD testei nessas tp e funciona liso.
Re: GTMEDIA_V8 Series Bug Tracking System
The EPG only fails one channel of each MUX, I thought it was only a problem with the Astra 19.2 satellite and I see what happens in all of them, and I would say that it is not 95% working but only works ⅓ of the EPG in the V8UHD, I refresh it with a USB connected and pressing the red key, until it is solved
Re: GTMEDIA_V8 Series Bug Tracking System
When playing any video media or pvr file, there is a date and time overlay being displayed on the top right corner of the screen. (It shows up several seconds after playback stars). Please remove this annoyance.
Thanks.
Thanks.
Re: GTMEDIA_V8 Series Bug Tracking System
Hello.
GTMEDIA V8 nova - problem when switching channels with the remote control. they always jump by 2 channels when the up arrow is pressed. when I press the button down it's ok 1 down?
what could be the reason?
GTMEDIA V8 nova - problem when switching channels with the remote control. they always jump by 2 channels when the up arrow is pressed. when I press the button down it's ok 1 down?
what could be the reason?
Re: GTMEDIA_V8 Series Bug Tracking System
The button on the remote could be worn and acts like it is pressed twice.
It could be that you move the remote as you press it and the set top box sees the IR signal, then not, then sees it again and thinks there were two presses of the button. Move the box by the TV so it faces the room better so it sees the remote more.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: GTMEDIA_V8 Series Bug Tracking System
Depends how heavy you are with the arrows, i also have the same issue, been heavy handed some times.
You could just press the numbers you require for the channel, you can hold the remote between thumb and second index finger, using the fore finger to press the numbers.
Den
You could just press the numbers you require for the channel, you can hold the remote between thumb and second index finger, using the fore finger to press the numbers.
Den
Re: GTMEDIA_V8 Series Bug Tracking System
These changes are requested for next firmware update. I use the V8x (11/2021 firmware) for searching out satellite feeds. I use a DiSeqc HH rotor to move the dish. I have tapped off the antenna input and fed it to a spectrum analyzer. As I traverse the dish, I can see the various sat footprints on the analyzer. Then I run a blind scan to find feeds. My issues start if I start a new search from scratch (Sat position is not set) and you already have a few satellites set up. Press MENU, Antenna Setup. Attached pic shows screen. First off, make the cursor start in the satellite list not the lnb control. Hitting the left arrow does not bring the cursor over, it just changes the LNB type, you have to press the EXIT button to move over to the satellite list. That wastes time to set things straight after that. The IMPORTANT feature/bug is when you scroll up/down the satellite list. As you pass over an entry, if Motor Setup is set to DiSEqc, the unit immediately moves the dish. NO! Do not send commands to dish until you select a satellite with Edit, OK, or Scan.
There are other areas of the setup where the unit has uncommanded moves of the dish. I will cover those in separate posts.
There are other areas of the setup where the unit has uncommanded moves of the dish. I will cover those in separate posts.
- Attachments
-
- 20211206_210559.jpg (481.65 KiB) Viewed 22003 times
Re: GTMEDIA_V8 Series Bug Tracking System
thank you very much.
we will check it.
we will check it.
-
- Posts: 173
- Joined: Tue Jul 30, 2019 3:30 pm
- Location: Italy
Re: GTMEDIA_V8 Series Bug Tracking System
I also look for feeds but I don't use DiSeqc HH,I use a polarmount with separate positioner... I'm glad our new friend has a nice spectrum analyzer... but for me the V8X is fine, make any changes you want but please be careful not to make things worse!
The only thing that I find annoying is that when I do a blind scan on a satellite then I find the channels, the V8X returns to the list of all satellites channels and not to that of the single satellite where the blindscan was made.
regards
The only thing that I find annoying is that when I do a blind scan on a satellite then I find the channels, the V8X returns to the list of all satellites channels and not to that of the single satellite where the blindscan was made.
regards
Re: GTMEDIA_V8 Series Bug Tracking System
If the blind scan has found channel(s), when I exit, it takes me to the first newly found channel. But when you do a blind scan and find NO channels, and exit, the receiver moves the dish to the last used satellite and channel. NO, it should stay still at that point.
Re: GTMEDIA_V8 Series Bug Tracking System: Dish Network Bug
I think I just found a new bug/feature. I have the dish pointed at 129W and I am successfully tuned in to a transponder (image xxx_101109.jpg with the frequency of interest (FOI) highlighted). Now with the dish at 129W, almost all the signals to the right of the FOI are from the Dish Network Satellite. The blind search does NOT pick up any of the Dish Network transponders, it appears to stop at 12.2GHz. If I manually setup a transponder for the appropiate frequency and bitrate (12.297 GHZ/21500 kbps, pol same as first example, data obtained from Lyngsat for Ceil-2), I get nothing (image xxx_101228 again with the FOI highlighted). While I do not expect to view the channels, I should be able to tune in the TP. The Dish Network signal strengths are booming relative to the FTA signals. What's up with this? I like to use the Dish Network/DirevTV satellites as positional beacons.
- Attachments
-
- 20211209_101109.jpg (593.58 KiB) Viewed 22557 times
-
- 20211209_101228.jpg (598.76 KiB) Viewed 22557 times