GTMEDIA Forum

V8 UHD V219 Version Update Guide
1. In the APP, press the 6666 number key on the remote control to call Youpron and other APPs
2. In the settings, select under "CA System", then select "TS delay", then press the number key 6666 on the remote control to call up the Softcam key and "protocol".
3. Skip the CW Checksum switch, you need to turn on the ON state to watch the 19.2E SKY channel

Gracias por el esfuerzo que hacéis en hacernos todo más fácil, es de agradecer

Lining wrote: ↑

Thu Dec 17, 2020 1:12 am

V8 UHD V219 Version Update Guide
1. In the APP, press the 6666 number key on the remote control to call Youpron and other APPs
2. In the settings, select under "CA System", then select "TS delay", then press the number key 6666 on the remote control to call up the Softcam key and "protocol".
3. Skip the CW Checksum switch, you need to turn on the ON state to watch the 19.2E SKY channel

P_Dec11_203932.jpg
P_Dec11_204550.jpg
P_Dec11_204746.jpg
P_Dec11_205022.jpg

Thank you for the UI update. Now It has a professional look. With your next release can you change the Signal and quality bar colours as well. Further, if possible introduce a key to view servers through info screen.

Thanks for the update and the guide. I must say that the gtmediavteambis doing a commendable job. Keep it up. For the guide am really impressed with it.

Lining wrote: ↑

Thu Dec 17, 2020 1:12 am

V8 UHD V219 Version Update Guide
1. In the APP, press the 6666 number key on the remote control to call Youpron and other APPs
2. In the settings, select under "CA System", then select "TS delay", then press the number key 6666 on the remote control to call up the Softcam key and "protocol".
3. Skip the CW Checksum switch, you need to turn on the ON state to watch the 19.2E SKY channel

P_Dec11_203932.jpg
P_Dec11_204550.jpg
P_Dec11_204746.jpg
P_Dec11_205022.jpg

Hi dear I am so happy to see new update thanks for every thing but I am facing some problems like as when I open youporn it shows no data 2nd in a channel list I want move channels maximum but it allow me only one channel 3re in a recall list its recall only 1 channel it must minimum15 channels thanks (which sat channel is running in image 1?)

After i upgrade this new s/w V2.19 my cccam list account erased all so i must input manually one by one.
Could you tell me how can i backup this cccam list account ? i've already re-input my database but it's still not solve .

satcodx wrote: ↑

Thu Dec 17, 2020 4:56 pm

After i upgrade this new s/w V2.19 my cccam list account erased all so i must input manually one by one.
Could you tell me how can i backup this cccam list account ? i've already re-input my database but it's still not solve .

There are some guides here.

Owen

Feralkiwi wrote: ↑

Thu Dec 17, 2020 7:55 pm

satcodx wrote: ↑

Thu Dec 17, 2020 4:56 pm

After i upgrade this new s/w V2.19 my cccam list account erased all so i must input manually one by one.
Could you tell me how can i backup this cccam list account ? i've already re-input my database but it's still not solve .

There are some guides here.

Owen

More instructions here:

viewtopic.php?f=67&t=12407

Thanks crp43, I added the wrong links. Feralkiwi

Leghari wrote: ↑

Thu Dec 17, 2020 3:01 pm

Lining wrote: ↑

Thu Dec 17, 2020 1:12 am

V8 UHD V219 Version Update Guide
1. In the APP, press the 6666 number key on the remote control to call Youpron and other APPs
2. In the settings, select under "CA System", then select "TS delay", then press the number key 6666 on the remote control to call up the Softcam key and "protocol".
3. Skip the CW Checksum switch, you need to turn on the ON state to watch the 19.2E SKY channel

P_Dec11_203932.jpg
P_Dec11_204550.jpg
P_Dec11_204746.jpg
P_Dec11_205022.jpg

Hi dear I am so happy to see new update thanks for every thing but I am facing some problems like as when I open youporn it shows no data 2nd in a channel list I want move channels maximum but it allow me only one channel 3re in a recall list its recall only 1 channel it must minimum15 channels thanks (which sat channel is running in image 1?)

hello
about youporn,please check it can be opened on your PC browser.it maybe internet issue.
about item2 and item3,we need some time to schedule

Alright thank you for your info

cpr43 wrote: ↑

Thu Dec 17, 2020 9:35 pm

Feralkiwi wrote: ↑

Thu Dec 17, 2020 7:55 pm

satcodx wrote: ↑

Thu Dec 17, 2020 4:56 pm

After i upgrade this new s/w V2.19 my cccam list account erased all so i must input manually one by one.
Could you tell me how can i backup this cccam list account ? i've already re-input my database but it's still not solve .

There are some guides here.

Owen

More instructions here:

viewtopic.php?f=67&t=12407

Ok, thank you very much

Gracias por la actualización, muy buen trabajo. Para próximas versiones se podría añadir en el menú principal un acceso directo a Xtream, estaría bien. Lo mismo que con webtv pero que fuera tambien Xtream. Gracias.

Muchas gracias por un "muy buen trabajo". Para el futuro me gustaría la opción de update a través de la red. No es ninguna exigencia. Despidamos este oscuro año con alegría contenida y recibamos con ilusión y esperanza el venidero. A quien corresponda, ¡Felices Fiestas!.

Hi everyone, I'm new here. I just got my V8 UHD and installed V219, any help on how to Sky 19E?
Thanks

romfnc wrote: ↑

Wed Dec 30, 2020 1:44 pm

Hi everyone, I'm new here. I just got my V8 UHD and installed V219, any help on how to Sky 19E?
Thanks

Look the "V8 UHD V219 Version Update Guide" (this topic) first post

Point 3. "Skip the CW Checksum switch, you need to turn on the ON state to watch the 19.2E SKY channel"

@Pepemato,
Ccc cam already in V219 or need to input manually? Sky De all channels are ok?

Can send me a post by private message please on how to do? Thank you

romfnc wrote: ↑

Wed Dec 30, 2020 7:32 pm

Can send me a post by private message please on how to do? Thank you

you need to input the cline manually.
you can find the user guide from viewtopic.php?f=67&t=12407

Great update! Thank you so much.
Honestly I'm new on V8 UHD. And little unhappy when I found I can only choose DiSEqC v1.2 option and without option to choose port in motor antenna setup. I use C/Ku LNB, and it was working great with my old V8Golden for a few years. Please kindly add this feature on next firmware release.

hello , i'm listing 3 issues ,hoply you will fix it with the next firmwar update .

at the "edit channel" when I want to move channel , it's better if you add the option to move group of channels instade of onky one each time.

at the "PVR" ,if you add the option of fast forward and rewand for recorded video .

at the "EPG" ,if you can to add the hebrew languige for the channel program info

thanks

Hello, please put the Czech language in the menu of the receiver until the next update, thank you ..

dave_dll wrote: ↑

Mon Jan 04, 2021 8:12 am

hello , i'm listing 3 issues ,hoply you will fix it with the next firmwar update .

at the "edit channel" when I want to move channel , it's better if you add the option to move group of channels instade of onky one each time.

at the "PVR" ,if you add the option of fast forward and rewand for recorded video .

at the "EPG" ,if you can to add the hebrew languige for the channel program info

thanks

If you press the OK button while playing that brings up the play info banner.
While that is up you can press left or right to move.
The amount you move is set in one of the menus, jump amount I think. Default is 1 min.

Owen

Hey Hi GT Media Team
Kindly come up with a way the next update on v8 uhd 4k will have a way to forever server iks and Apollo IPTV....

The V8 UHDis a very good receiver,however having a motorised dish I found that the channel memory is filled very quick thus many satellite channells cannot be searched or stored. Almost any other brand sta receiver have at least 5000 stored channel position. Is there any way that the channell memory can be incread?