GTMEDIA Forum

Scan Satellite Channels. Channel names are all confused Making it difficult to channel When scanning is the same as before, the channels must be reordered every time. Please make changes to the new fw.

romfnc wrote: ↑

Sun Jan 24, 2021 2:07 pm

Can you please advise how to revert back to 219? Is there a guide on how to?

hello
about revert back to 219,you can find the user guide from viewtopic.php?f=67&t=14431
but with v220,please check your lnb cable,There may be some interference signals in your surroundings

phot9724 wrote: ↑

Sun Jan 24, 2021 6:13 pm

Scan Satellite Channels. Channel names are all confused Making it difficult to channel When scanning is the same as before, the channels must be reordered every time. Please make changes to the new fw.

hello
about the channel names are all confused ,can you record the tp, then send it to me, i will check the channel names issue

hi, will you be able to add support for Griffin cards and also do you support CI + cards ?

Make it stream ts file size small

I think the new firmware for the V8 UHD should be fix the scanning and channel storing way, avoiding of creating double channel names occupying memory size. It s a real nightmare to organize the channel after doing a simple satellite scanning.

Hello, please put the Hungary language in the menu of the receiver until the next update, thank you ..

Stick with 219!! 220 xxxxxxx! I just wanted the Unimas 103w TP keys!! But the 220 update has a bug that will freeze your receiver on the channel list if it tunes to a channel with no signal or scrambled video. Only way to get out of that is to reboot or wait for the key to open the channel! Once open, it allows you to clear the channel list.

Czy jest możliwość zainstalowania aplikacji KODI?

modcom65 wrote: ↑

Wed Feb 03, 2021 2:07 pm

Czy jest możliwość zainstalowania aplikacji KODI?

No. Only Android applications (GTC/GTC-2/GTS/GTSpro)

can you put a switch to turn off moving dish on C band like like you did on the V8 super.

@840
When you move from one satellite to another, just press (exit) on the remote, the message (moving dish) goes away, the dish still moves to were you sent it, this may help in the short term, it would be nice to have the function to be able to switch the message (on / off).

Den

The best should be 'message ON' only when the dish is effectively moving, switching OFF once it reaches the final position (as implemented in other sat receivers...).

the best would be message off for c band just like the V8 super and the V8 nova does.

Help please add Indonesian language and
When I watch astro on 91.5 ku band, it's like watch discovery Channel animal planet, fox movie can't get subtitles although I have set the subtitles to Malaysia but still disabled.
Can't watch with subtitles and I am very need the subtitles in astro Channel because not working
Thanks you

STRETCH wrote: ↑

Thu Jan 14, 2021 8:42 pm

Just name your softcam as "softcam" on your usb then (import) back into the receiver.

Den

That is interesting.
Do you mean to rename the CCcam.cfg file to softcam without extension? Does this load the data in alternative ways to the decoder and could improve the flow?
I care because I also have a channel that crashes often and is really annoying when it happens.

I do not know about the cccam side of things, softcam is for the likes of people who like to keep the keys that they have got up to date in case the receiver does not (auto roll) them.

Den

ASEPSFIRDAUS wrote: ↑

Mon Jun 07, 2021 8:10 am

Help please add Indonesian language and
When I watch astro on 91.5 ku band, it's like watch discovery Channel animal planet, fox movie can't get subtitles although I have set the subtitles to Malaysia but still disabled.
Can't watch with subtitles and I am very need the subtitles in astro Channel because not working
Thanks you

hello
can you help us record the transponder data ,then send it to me by https://wetransfer.com/.
about how the record the tp data, you can find out the user guide from viewtopic.php?f=67&t=12407 (GTMEDIA_V8UHD_How_to_record_Ts 2020.7.21.zip)
because i need to check the tp data,maybe the subtitle also be encrypted

Can you please include the lcn option in dvbc channel search? I cant get the order correct on my v8 uhd.

4nonymous wrote: ↑

Wed Sep 01, 2021 6:01 pm

Can you please include the lcn option in dvbc channel search? I cant get the order correct on my v8 uhd.

Just to reinforce this request. It would be very helpful

Hello guys
anyway to revert from mars firmware to ecam firmware or to original one on v8 uhd
if only available via serial can you tell me which dongle to buy to connnect it with pc
Top

SpotnikISLA wrote: ↑

Sat Aug 26, 2023 11:46 am

Hello guys
anyway to revert from mars firmware to ecam firmware or to original one on v8 uhd
if only available via serial can you tell me which dongle to buy to connnect it with pc
Top

viewtopic.php?f=51&t=20721

ESta version MARS no funciona, no permite bajar los archivos Zip para descomprimir .
Diego Sanchez E.mail: dusazm18@yahoo.com

Yes if you have changed to Mars software the unit will not revert to standard GT Media software vis USB.

You need to use the recovery RS232 tool to do that.

Owen

One question for developers

Is it possible to add option to change colour of dvb subtitles , on Mars software
Currently only white colour subs is possible to have

Tnx