V8 Golden signal intensity 0%
Moderators: admin, GTMedia Team
V8 Golden signal intensity 0%
why signal intensity freesat V8 Golden 0%? while using a new LNB, and cable connection between rx with LNB no problem or short. how to handle it?
- Attachments
-
- 3.jpg (47.86 KiB) Viewed 2124 times
-
- 2.jpg (54.95 KiB) Viewed 2124 times
-
- 1.jpg (73.77 KiB) Viewed 2124 times
-
- 网站管理员
- Posts: 667
- Joined: Thu Aug 11, 2016 10:58 am
- Location: Thailand
Re: V8 Golden signal intensity 0%
Try 22k change to "On" or "Auto"
Re: V8 Golden signal intensity 0%
22k have changed to auto mode, but the signal intensity remains 0%. does the new signal intensity come out % along with the signal quality?Eak_Dumnern wrote:Try 22k change to "On" or "Auto"
because to scan digital broadcast from antenna ,, signal intensity not out ,, if it can channel digital program out % signal intensity and signal quality
Re: V8 Golden signal intensity 0%
With the LNB on your work bench you will only see 0%.
These boxes only show levels when there is some form of signal.
To get some form of signal you need the LNB in a dish and pointed at a sat.
Even with the dish set up, these units still show 0% on some DVB-S2 (8psk and 16psk), until you get a very good signal.
I hope this helps.
Owen
These boxes only show levels when there is some form of signal.
To get some form of signal you need the LNB in a dish and pointed at a sat.
Even with the dish set up, these units still show 0% on some DVB-S2 (8psk and 16psk), until you get a very good signal.
I hope this helps.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: V8 Golden signal intensity 0%
thanks bro,,,Feralkiwi wrote:With the LNB on your work bench you will only see 0%.
These boxes only show levels when there is some form of signal.
To get some form of signal you need the LNB in a dish and pointed at a sat.
Even with the dish set up, these units still show 0% on some DVB-S2 (8psk and 16psk), until you get a very good signal.
I hope this helps.
Owen
means true, to reciever v8 golden this must get signal satelite first new second percentage of signals appear. for beginners is very difficult to tracking. mistaken for a lnb or damaged cord.