GTMedia V8NOVA Firmware （23/06/2018）Firmware experience

[Lining]

GTMedia V8NOVA Firmware （23/06/2018）Firmware experience
23/06/2018
change log:
Please update by all code mode.
1)Solved problem of "Moving Dish, Please Wait…".
2)Sleep timer only active once.
3)Fixed bug: it crashing after a few minutes of scanning (Astra 19,2).

Do not use an older DB to import this machine and it will not be recognized.

viewtopic.php?f=40&t=7791&sid=e48225339 ... 65b5801257

Suggestions please leave a message.

[diablo]

About to test it... fingers crossed ... great to see such another updated released so fast... good work

[diablo]

About to test it... fingers crossed ... great to see such another updated released so fast... good work

Flashed, factory reset, full scan on Astra 19,2 = OK ... 100%

For me, that's fixed! Thank you

[Eak_Dumnern]

This last firmware comment: Do not use an older DB to import this machine and it will not be recognized.
I want to know database from freesat v8 can not import to v8 nova, is it?

[Hank4]

You fixed it, no more please wait, dish moving. Thank you!

[machteck]

GTMedia V8NOVA Firmware （23/06/2018）Firmware experience
23/06/2018
change log:
Please update by all code mode.
1)Solved problem of "Moving Dish, Please Wait…".
2)Sleep timer only active once.
3)Fixed bug: it crashing after a few minutes of scanning (Astra 19,2).

Do not use an older DB to import this machine and it will not be recognized.

viewtopic.php?f=40&t=7791&sid=c7a67e65d ... 413a5593dd

Suggestions please leave a message.

YE HA Fixed my problem moving dish,ima happy Thanks to whoever corrected and updated.

[tonype]

Se sigue bloqueando en ciertas frecuencias hay que desenchufarlo y vuelve a pasar en frecuencias como 12515 H SR 22000 FEC 5/6,
DVB-S, en SD, satélite Astra 1L 19´2º Este.
Esperemos se resuelva, gracias por intentarlo pero sigue dando problemas.

[didox]

Se sigue bloqueando en ciertas frecuencias hay que desenchufarlo y vuelve a pasar en frecuencias como 12515 H SR 22000 FEC 5/6,
DVB-S, en SD, satélite Astra 1L 19´2º Este.
Esperemos se resuelva, gracias por intentarlo pero sigue dando problemas.

A mi me pasa exactamente lo mismo. A nadie mas le pasa?

[diablo]

Se sigue bloqueando en ciertas frecuencias hay que desenchufarlo y vuelve a pasar en frecuencias como 12515 H SR 22000 FEC 5/6,
DVB-S, en SD, satélite Astra 1L 19´2º Este.
Esperemos se resuelva, gracias por intentarlo pero sigue dando problemas.

A mi me pasa exactamente lo mismo. A nadie mas le pasa?

Has hecho un "restablecimiento de fábrica" despues el actualización de firmware y despues escanar Astra 19,2 para los canales?

[didox]

Se sigue bloqueando en ciertas frecuencias hay que desenchufarlo y vuelve a pasar en frecuencias como 12515 H SR 22000 FEC 5/6,
DVB-S, en SD, satélite Astra 1L 19´2º Este.
Esperemos se resuelva, gracias por intentarlo pero sigue dando problemas.

A mi me pasa exactamente lo mismo. A nadie mas le pasa?

Has hecho un "restablecimiento de fábrica" despues el actualización de firmware y despues escanar Astra 19,2 para los canales?

Si he hecho eso. Incluso he borrado ese tp y lo he vuelto a poner pero nada, sigue igual. Una cosa curiosa es que si no lo tienes conectado a internet no se bloquea, en el momento lo conectas y abre el canal se bloquea.
Mi duda es si ese problema lo tienen todos los v8 nova. O algunos

[Nedko]

Flashing latest firmware, load default settings and the results:
1. No freeze for scanning Astra19.2 and Hotbird 13. All scans blind or full is finish 100%. Problem solved.
2. Sleep timer is Ok. Problem solved
3. Message "Moving dish..." It has become worse than before. This message appears after each channel switch of ONE satellite In Any satellite... Video from problem here:
https://youtu.be/RoMoekrT8Qs
No subs for some channels - still problem( video above)
Video effects - picture is changes, but label always stay to Standard
But thanks for a fast work team. Hard work engineers

[diablo]

Flashing latest firmware, load default settings and the results:
1. No freeze for scanning Astra19.2 and Hotbird 13. All scans blind or full is finish 100%. Problem solved.
2. Sleep timer is Ok. Problem solved
3. Message "Moving dish..." It has become worse than before. This message appears after each channel switch of ONE satellite In Any satellite... Video from problem here:
https://youtu.be/RoMoekrT8Qs
No subs for some channels - still problem( video above)
Video effects - picture is changes, but label always stay to Standard
But thanks for a fast work team. Hard work engineers

Can't play video here in Spain. It's blocked due to copyright sound apparently

[Nedko]

YouTube... I will edit. Now is OK

[thom lungu]

freesat/gt media please solve powervu software problem

[iq180]

Well I must say this is better than the last one, now if we could just fix A F N on 99.2W, that would be great.

[Feralkiwi]

Se sigue bloqueando en ciertas frecuencias hay que desenchufarlo y vuelve a pasar en frecuencias como 12515 H SR 22000 FEC 5/6,
DVB-S, en SD, satélite Astra 1L 19´2º Este.
Esperemos se resuelva, gracias por intentarlo pero sigue dando problemas.

Have you tried setting your LNB frequency to an incorrect value.
If your LNB is set for 13000 and you change to 10750 that TP frequency of 12515 will scan in with a different value.

This will show if it is the value of the TP in the TP list or something in the TP stream that is the problem.

Si he hecho eso. Incluso he borrado ese tp y lo he vuelto a poner pero nada, sigue igual. Una cosa curiosa es que si no lo tienes conectado a internet no se bloquea, en el momento lo conectas y abre el canal se bloquea.
Mi duda es si ese problema lo tienen todos los v8 nova. O algunos
Google translate:
If I have done that. I've even deleted that tp and I've put it back but nothing, remains the same. One curious thing is that if you do not have it connected to the internet it will not be blocked, at the moment you connect it and the channel is blocked.
My question is if that problem has all v8 nova. Or some

This almost looks like censorship via the net, but that can not be.
I think it is that when the net is connected the Nova is using memory in a different way that corrupts the TP info or that the WiFi is interfering with the signal.

Question: Is your internet connection via cable or WiFi. This could be the WiFi frequency is the same as the TP input frequency.
Changing the LNB value in the setup menu would not fix this if is WiFi interference, as the same frequency will be in the cable.
Changing the LNB to one with a different "Low" frequency at the dish would change the frequency in the LNB cable to the box.

Please what LNB low frequency are you using that has this 12515 blocked with the net "ON"?


Owen

[chicolin]

Well I must say this is better than the last one, now if we could just fix A F N on 99.2W, that would be great.

GTMedia V8NOVA hace autorroll en los A F N on 99.2W pero no habre la imagen o el video.
He copiado las llaves que V8NOVA lanza de estos canales (A F N) a un openbox z5 y abre todos los canales.

Que le falta a freesat para que se vea el video si hace autorroll el GTMedia V8NOVA ?


GTMedia V8NOVA makes autorroll in the A F N on 99.2 W but there will be no image or video.
I have copied the keys that V8NOVA launches from these channels (A F N) to an Openbox Z5 and opens all channels.

What is missing to Freesat to see the video if you do autorroll the GTMedia V8NOVA?

[tonype]

Have you tried setting your LNB frequency to an incorrect value.
If your LNB is set for 13000 and you change to 10750 that TP frequency of 12515 will scan in with a different value.

This will show if it is the value of the TP in the TP list or something in the TP stream that is the problem.

He probado todo eso, se empieza a ver y a los pocos segundos se sigue quedando congelado y hay que apagar y encender el aparato.

[Feralkiwi]

He probado todo eso, se empieza a ver y a los pocos segundos se sigue quedando congelado y hay que apagar y encender el aparato.

Questions:
Are you using wifi, or do you have the wifi network connection enabled in the nova?
What LNB low frequency are you using on your dish?

With this information I can set up a matching LNB and test for wifi interference on my nova.

Owen

[Xsat]

Hi,

Channels of HEVC encrypted with BISS are voice only
It will be decoded.
I can not confirm the video yet.

[Feralkiwi]

Hi,

Channels of HEVC encrypted with BISS are voice only
It will be decoded.
I can not confirm the video yet.

I think HEVC is 4k and the Nova does not do that, only h.265

Owen

[Xsat]

Hi,

Channels of HEVC encrypted with BISS are voice only
It will be decoded.
I can not confirm the video yet.

I think HEVC is 4k and the Nova does not do that, only h.265

Owen

Thanks Owen,

It's NOT 4K channel.
They transmitting 16APSK & H.265/HEVC.
V9 Super is working.

[didox]

Have you tried setting your LNB frequency to an incorrect value.
If your LNB is set for 13000 and you change to 10750 that TP frequency of 12515 will scan in with a different value.

This will show if it is the value of the TP in the TP list or something in the TP stream that is the problem.

He probado todo eso, se empieza a ver y a los pocos segundos se sigue quedando congelado y hay que apagar y encender el aparato.

Estoy como tu, he probado de todo. Quitar tp y volverlo a poner, quitar astra y volverlo a poner. Si te fijas cuando te pones encima del tp unas veces tiene señal y otras no. El resultado siempre es el mismo pones un canal de ese tp y se queda bloqueado. Yo voy a devolver el deco y pedir otro, a todos no le pasa. Si me vuelve a pasar lo devuelvo y cambio de marca.

[tonype]

Questions:
Are you using wifi, or do you have the wifi network connection enabled in the nova?

Saludos, se queda congelado tanto en wifi como en red (RJ45), en red se queda congelado mucho antes que con wifi.

What LNB low frequency are you using on your dish?

He probado varias y en todas ocurre lo mismo.



Tengo Freesat V7, V8Super, V9, el único que no funciona bién es el Nova.

Saludos y gracias por tu trabajo.

[djmelgo]

GTMedia V8NOVA Firmware （23/06/2018）Firmware experience
23/06/2018
change log:
Please update by all code mode.
1)Solved problem of "Moving Dish, Please Wait…".
2)Sleep timer only active once.
3)Fixed bug: it crashing after a few minutes of scanning (Astra 19,2).

Do not use an older DB to import this machine and it will not be recognized.

viewtopic.php?f=40&t=7791&sid=97c5a16d3 ... 0c8aa64d33

Suggestions please leave a message.

Thnx!!!! Now i can blind scan full freqs in Astra 19.2.

But, i cant edit channel list in DB EDITOR... no open db.
Thnx again.