Biss Key Question

Please discuss the softcam feature ,share the softcam key...

Moderators: admin, GTMedia Team

Post Reply
ujang
Posts: 1
Joined: Fri Feb 17, 2017 4:07 am

Biss key

Post by ujang »

Dear masters,...
I need to input my biss key to skybox v8 combo, how to show the menu in the receiver?..many thanks for your help.

nico
Posts: 29
Joined: Fri Aug 12, 2016 9:56 am

Re: Biss key

Post by nico »

1-Menu
2-Tools
3-Go in Conditional Access
4-Press 6666 on the remote control, "Key Edit" will show
5-Go in "Key Edit", select "Biss" and press green button on the remote to add biss key data.

You can use this guide:
How to put Softcam Guide

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Biss key

Post by Feralkiwi »

This forum is for Freesat units.
Try another forum for skybox.

However ny Skybox V8 (not combo) is like this
Go to "Camds Setup" then "CCcam Cient Setup" then "Manage Config Files" then "Constant.cw"
Use the right button to get to the "+" to add a code.

Code settings for BISS are.
Ciad =2600
ProvID =000000
SID= your channel's SID, You can see this by pressing the "Info" button three time while on that channel.
PMT PID=0000
ECM PID=0000
Even Cw= the biss code for your channel
Odd Cw = the same code again.

Good luck

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

Post Reply

Return to “Softcam :Biss/PowerVu/Tandberg”