GTmedia GTC OSCAM

[DonSTV]

Frend, help me. Export oscam files error. I need me 6 files from oscam.

[DonSTV]

And tell me how to roll back from the firmware 6.3.40 to the old?

[cpr43]

And tell me how to roll back from the firmware 6.3.40 to the old?

viewtopic.php?f=55&t=9299&p=36895&sid=1 ... d12#p36895

[juan_vale]

And tell me how to roll back from the firmware 6.3.40 to the old?

Not possible, the new version 3, shown as a 3 in the 6.3.40, are only available OTA, the 6.3.37 was never published as a zip file. Do not put a V2 firmware on a V3 box, I was advised by factory it will mess up the box.

[juan_vale]

Frend, help me. Export oscam files error. I need me 6 files from oscam.

You will find all those files on the Webif page, in browser open (IP of box:8081) in my case I will put 192.168.1.44:8081 as I use a static IP outside my DHCP range, then use copy/paste to make the files on your computer, respecting the file type. You can also edit/save the files there. There is a lot of information in the Webif.
What error do you get, I used to get a list which I could select which file, I now get a blank page with nothing to select.
PS sorry I forgot, if you use FTP you can ftp in to 'root/vendor/winsat/oscam/config' and you will find all the files there. I installed 'The Olive Tree FTP Server" from the play store and with a static IP I have no problems doing file transfers. On your PC you can use WinSCP..

[DonSTV]

Thanks, I got to the files, when viewing oscam cfg, oscam user, oscam.srvid, does not open. Replace files with nothing.

[DonSTV]

The Webif, i can"t enter. 192.168.1.49:8081 no work, although ping 192.168.1.49 working.

[juan_vale]

OK I have included those 3 files in the attached .rar... place them in the same folder as the others and you should be ok. The Webif info is in one of those files so should work after a reboot.
Good luck

oscam.rar

(2.44 KiB) Downloaded 99 times

.

[DonSTV]

Ok Thanks. Yes why oscam monitor does not work. When turned on, it throws out the to menu.

[DonSTV]

Thanks, everything worked.

[rakab24]

Ok Thanks. Yes why oscam monitor does not work. When turned on, it throws out the to menu.

I have the same problem, how you fixed it?

[DonSTV]

OK I have included those 3 files in the attached .rar... place them in the same folder as the others and you should be ok. The Webif info is in one of those files so should work after a reboot.
Good luck

oscam.rar.

Replaced with these files. And it all worked.

[rakab24]

OK I have included those 3 files in the attached .rar... place them in the same folder as the others and you should be ok. The Webif info is in one of those files so should work after a reboot.
Good luck

oscam.rar.

Replaced with these files. And it all worked.

I cant open Webif. I have IP my box but I cant in.

[wikjan]

I cant open Webif. I have IP my box but I cant in.

Are you sure you put :8081 after IP of your box?
If not, do it correct eg. 192.xxx.yyy.70:8081
And it is for your PC or laptop.
If you are trying on GTC box then I think you should try 127.0.0.1:8081 , but I am not sure if it will work