EMM Keys Powervu Oscam
Moderators: admin, nzl229, GTMedia Team
EMM Keys Powervu Oscam
Does anyone know the correct way to add EMM Powervu Keys in GTC's Oscam? Keys responsible for the ECM Keys autoroll. ECM Keys I know add. EMM Keys do not!
Re: EMM Keys Powervu Oscam
P 020 005E278F 2C803303B933A4 ; EMM Key
P- Power Vu
020- Satelite No. in the Antenna Setup
005E278F 2C803303B933A4 ; EMM Key (just a sample)
P- Power Vu
020- Satelite No. in the Antenna Setup
005E278F 2C803303B933A4 ; EMM Key (just a sample)
-
- Posts: 51
- Joined: Mon Jul 31, 2017 5:39 pm
Re: EMM Keys Powervu Oscam
I would like emm keys for north america if some one has them. thanks.
Re: EMM Keys Powervu Oscam
in my case the emm keys needs 00 like the normal freesat like the v8 super........
V8 NOVA, GTC, GLOBO HD405, FreeSat V8 Super, V7, V7 Max
There is no way to peace, peace is the way......
There is no way to peace, peace is the way......
Re: EMM Keys Powervu Oscam
Thank You.cpr43 wrote:P 020 005E278F 2C803303B933A4 ; EMM Key
P- Power Vu
020- Satelite No. in the Antenna Setup
005E278F 2C803303B933A4 ; EMM Key (just a sample)
Re: EMM Keys Powervu Oscam
Explain the difference as to how you express the PowerVu string for the V8 Super vs Oscam for the GTSeries. I assume the same key can be used for the same transponder but on the GTSeries you replace 00 with three digit sat no? Explain Please. Thanks Hank
Re: EMM Keys Powervu Oscam
espaun206 wrote:No me funciona de esa forma el autorroll solo de esta forma si funcionacpr43 wrote:P 020 005E278F 2C803303B933A4 ; EMM Key
P- Power Vu
020- Satelite No. in the Antenna Setup
005E278F 2C803303B933A4 ; EMM Key (just a sample)
P 10001 00 00000000000000 ; ECM Key0
P 10001 01 00000000000000 ; ECM Key1
P 10015 00 00000000000000 ; ECM Key0
P 10015 01 00000000000000 ; ECM Key1
P 1 005A4xxx AF82076Fxxxxxx ; EMM Key
Muchas Gracias! Mi GTC hace un tiempo no trabaja bien. Tengo que seleccionar el port 1 del Disqc 1.0 aunque NO este usando switch para que me de calidad. Si no lo hago NO me da calidad ni señal. Los canales PowerVu y Biss dejaron de trabajar. Aunque ahora el Oscam es nuevo pues creo que trabaja diferente. He leido que como mencionas hay que poner las ECM 00 y 01 en blanco (dummy) y el EMM para que haga autoroll como explicastes. Creo que hay 2 modelos de GTC V2 y V3 y ambas estan trabajando en formas extrañas. Tus Biss te estan trabajando??? Como las estas escribiendo en el softcam?? Muchas Gracias y Saludos
Re: EMM Keys Powervu Oscam
Por mala suerte solo tuve una semana con mi GTC V3 funcionando correctamente, pero en este tiempo si logre echar a trabajar el Oscam, aclaro que no se hizo autoroll pero si encontro la manera de editar el
softcam.key. En los foros Europeos explican el formato y lo pongo aqui en caso que hay otras personas que le interesen.
Usando los ejemplares de ariba , los primeros 4 digitos es el GROUP ID, es un numero que Ud
escojes y va de 0001 a FFFF... en este caso es 0001 solo que no se escribe los primeros ceros porque
no tienen valor. Yo pongo un GROUP ID para cada transponder, la razon es que el segundo grupo es el SID y es probable que se va a repitir el SID en cada satelite. Tuve este problema en un principio y se bloquearon los canales con el mismo SID hasta que lo asigne a un GROUP ID diferente
GROUP ID SID
P (000)1 0001 00 00000000000000 ; ECM Key0
P (000)1 0001 01 00000000000000 ; ECM Key1
P (000)1 0015 00 00000000000000 ; ECM Key0
P (000)1 0015 01 00000000000000 ; ECM Key1
Tambien los EMM's se asigna la misma GROUP ID, el 020 en el ejemplo refiere a las ECM's en el grupo
020.
P (000)1 005A4xxx AF82076Fxxxxxx ; EMM Key
P (0)020 005E278F 2C803303B933A4 ; EMM Key
Nota. los numeros en parentesis no se ponen,no tiene valor.
Cuando me llega el GTC de garantia voy a seguir investigando.
****************************************************
My bad luck,I only had one week with my GTC V3 working correctly, but in that time I managed to get
Oscam to work, it did not autoroll but I found the way to edit the softcam.key. In the European forums
the format is explained and I'm showing it here in case there are others interested.
Using the examples shown above. The first 4 digits are the GROUP ID, it is a number that you choose and
it goes from 0001 to FFFF ...in this case it is 0001 only that you do not have to write the leading zeros because they have no value. I put a GROUP ID for each transponder, the reason is that the second group is the SID and it is likely that the SID will be repeated on each satellite. I had this problem at first, it blocked the channels with the same SID until I assigned a different GROUP ID to each one.
GROUP ID SID
P (000)1 0001 00 00000000000000 ; ECM Key0
P (000)1 0001 01 00000000000000 ; ECM Key1
P (000)1 0015 00 00000000000000 ; ECM Key0
P (000)1 0015 01 00000000000000 ; ECM Key1
Also the EMM's are assigned the same GROUP ID, the 020 in the example refers to the ECM's in group 020.
P (000)1 005A4xxx AF82076Fxxxxxx ; EMM Key
P (0)020 005E278F 2C803303B933A4 ; EMM Key
Note. the numbers in parenthathis are not included, as they have no value.
When I get the replacement GTC I will continue to investigate.
softcam.key. En los foros Europeos explican el formato y lo pongo aqui en caso que hay otras personas que le interesen.
Usando los ejemplares de ariba , los primeros 4 digitos es el GROUP ID, es un numero que Ud
escojes y va de 0001 a FFFF... en este caso es 0001 solo que no se escribe los primeros ceros porque
no tienen valor. Yo pongo un GROUP ID para cada transponder, la razon es que el segundo grupo es el SID y es probable que se va a repitir el SID en cada satelite. Tuve este problema en un principio y se bloquearon los canales con el mismo SID hasta que lo asigne a un GROUP ID diferente
GROUP ID SID
P (000)1 0001 00 00000000000000 ; ECM Key0
P (000)1 0001 01 00000000000000 ; ECM Key1
P (000)1 0015 00 00000000000000 ; ECM Key0
P (000)1 0015 01 00000000000000 ; ECM Key1
Tambien los EMM's se asigna la misma GROUP ID, el 020 en el ejemplo refiere a las ECM's en el grupo
020.
P (000)1 005A4xxx AF82076Fxxxxxx ; EMM Key
P (0)020 005E278F 2C803303B933A4 ; EMM Key
Nota. los numeros en parentesis no se ponen,no tiene valor.
Cuando me llega el GTC de garantia voy a seguir investigando.
****************************************************
My bad luck,I only had one week with my GTC V3 working correctly, but in that time I managed to get
Oscam to work, it did not autoroll but I found the way to edit the softcam.key. In the European forums
the format is explained and I'm showing it here in case there are others interested.
Using the examples shown above. The first 4 digits are the GROUP ID, it is a number that you choose and
it goes from 0001 to FFFF ...in this case it is 0001 only that you do not have to write the leading zeros because they have no value. I put a GROUP ID for each transponder, the reason is that the second group is the SID and it is likely that the SID will be repeated on each satellite. I had this problem at first, it blocked the channels with the same SID until I assigned a different GROUP ID to each one.
GROUP ID SID
P (000)1 0001 00 00000000000000 ; ECM Key0
P (000)1 0001 01 00000000000000 ; ECM Key1
P (000)1 0015 00 00000000000000 ; ECM Key0
P (000)1 0015 01 00000000000000 ; ECM Key1
Also the EMM's are assigned the same GROUP ID, the 020 in the example refers to the ECM's in group 020.
P (000)1 005A4xxx AF82076Fxxxxxx ; EMM Key
P (0)020 005E278F 2C803303B933A4 ; EMM Key
Note. the numbers in parenthathis are not included, as they have no value.
When I get the replacement GTC I will continue to investigate.
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
Re: EMM Keys Powervu Oscam
Good evening to the noble colleagues, I use my GTC in Powervu in Band C here in Brazil that way. Now seeing the above topic I did not understand how to use the keys in EMM.
Re: EMM Keys Powervu Oscam
For example: I use ECM keys in this way
P 0083003C 00 xxxxxxxxxxxxxx; PLAYBOY HD
P 0083003C 01 xxxxxxxxxxxxxx; PLAYBOY HD
And the EMM in Fressat G7 max this way:
P 008600E6 00 xxxxxxxxxxxxxx; EMM Key_40.5W_SES6_TP-4096-V-30000. But in the GTC put that way it did not work. I ask what is the correct way to use the keys in EMM in Freesat GTC 4k? Thank you.
P 0083003C 00 xxxxxxxxxxxxxx; PLAYBOY HD
P 0083003C 01 xxxxxxxxxxxxxx; PLAYBOY HD
And the EMM in Fressat G7 max this way:
P 008600E6 00 xxxxxxxxxxxxxx; EMM Key_40.5W_SES6_TP-4096-V-30000. But in the GTC put that way it did not work. I ask what is the correct way to use the keys in EMM in Freesat GTC 4k? Thank you.
Re: EMM Keys Powervu Oscam
Segun explico juan_vale, esa es la unica forma que he conseguido que mi GTC haga autoroll en PowerVu.
Este ejemplo en mi Softcam que hice es en el Hispasat 30W y me hizo el autoroll. Cambie algunos numeros de las llaves para NO hacerlas publicas
P 10029 00 00000000000000 ; A3 INTERNACIONAL HD (30.0 W), 12091
P 10029 01 00000000000000 ; A3 INTERNACIONAL HD (30.0 W), 12091
P 1 006E1960 9EFD2D8D48A1F1 ; EMM Key
P 10029 00 191F18713B6777 ; added by OSEmu Tue Feb 5 16:48:52 2019 UA: 006E1960
P 10029 01 1D1BE371868EA0 ; added by OSEmu Tue Feb 5 16:48:52 2019 UA: 006E1960
Este ejemplo en mi Softcam que hice es en el Hispasat 30W y me hizo el autoroll. Cambie algunos numeros de las llaves para NO hacerlas publicas
P 10029 00 00000000000000 ; A3 INTERNACIONAL HD (30.0 W), 12091
P 10029 01 00000000000000 ; A3 INTERNACIONAL HD (30.0 W), 12091
P 1 006E1960 9EFD2D8D48A1F1 ; EMM Key
P 10029 00 191F18713B6777 ; added by OSEmu Tue Feb 5 16:48:52 2019 UA: 006E1960
P 10029 01 1D1BE371868EA0 ; added by OSEmu Tue Feb 5 16:48:52 2019 UA: 006E1960
Re: EMM Keys Powervu Oscam
OK, Poco a poco, Gracias por tu ayuda!!!espaun206 wrote:asi es esa es la forma ,es lo mismo que ya coloque solo creo que no me entendieron comocpr43 wrote:Segun explico juan_vale, esa es la unica forma que he conseguido que mi GTC haga autoroll en PowerVu.
Este ejemplo en mi Softcam que hice es en el Hispasat 30W y me hizo el autoroll. Cambie algunos numeros de las llaves para NO hacerlas publicas
P 10029 00 00000000000000 ; A3 INTERNACIONAL HD (30.0 W), 12091
P 10029 01 00000000000000 ; A3 INTERNACIONAL HD (30.0 W), 12091
P 1 006E1960 9EFD2D8D48A1F1 ; EMM Key
P 10029 00 191F18713B6777 ; added by OSEmu Tue Feb 5 16:48:52 2019 UA: 006E1960
P 10029 01 1D1BE371868EA0 ; added by OSEmu Tue Feb 5 16:48:52 2019 UA: 006E1960
Re: EMM Keys Powervu Oscam
Bonan vesperon, kion vi vidas A F N(American Forces Network) pack powervu kodigo
Re: EMM Keys Powervu Oscam
Good night, I have read all the messages of the mentioned topic, but I have not yet learned how to add the keys in EMM. Why any colleague could put a line with the data in EMM? Because the ECM I use here without problems. Thank you.
Re: EMM Keys Powervu Oscam
There is some good reading here >>vavagba wrote:Good night, I have read all the messages of the mentioned topic, but I have not yet learned how to add the keys in EMM. Why any colleague could put a line with the data in EMM? Because the ECM I use here without problems. Thank you.
Code: Select all
https://github.com/oscam-emu/oscam-patched/wiki/PowerVU-config
See if this helps you. Also the first part of the linked page explains about an important update that needs to be applied to your Oscam files.
Yes they may work for years, but if they change and you do not have a valid EMM key then your box will not autoroll/update. So the EMM's are not required for the daily work, but they are required if the ECM key changes.Because the ECM I use here without problems.
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
Re: EMM Keys Powervu Oscam
i dont know when this company support the devices for auto update for BISS & POWERVUE LIke other companys
we r stucking with GTC ..if we know before its like this support we will not purchase it .
we r stucking with GTC ..if we know before its like this support we will not purchase it .
Re: EMM Keys Powervu Oscam
Boa noite aos colegas, mais uma duvida, deve ser inseridas as chaves em EMM as da linha (00) ou (01)? obrigado.
Good evening to colleagues, one more doubt, should the keys be inserted into the EMM of the line (00) or (01)? thank you.
Good evening to colleagues, one more doubt, should the keys be inserted into the EMM of the line (00) or (01)? thank you.
Re: EMM Keys Powervu Oscam
Hey? I can pm EMM KEYS for Diva and sony on 76.5? I have failed to understand how to creat one. Thankscpr43 wrote:P 020 005E278F 2C803303B933A4 ; EMM Key
P- Power Vu
020- Satelite No. in the Antenna Setup
005E278F 2C803303B933A4 ; EMM Key (just a sample)
Re: EMM Keys Powervu Oscam
If you are talking about EMM keys, they will go in the 00 line.vavagba wrote:Boa noite aos colegas, mais uma duvida, deve ser inseridas as chaves em EMM as da linha (00) ou (01)? obrigado.
Good evening to colleagues, one more doubt, should the keys be inserted into the EMM of the line (00) or (01)? thank you.
Re: EMM Keys Powervu Oscam
Por favor o que é EMM? Juro que não sei o que é.
Re: EMM Keys Powervu Oscam
google translatePor favor o que é EMM? Juro que não sei o que é.
A chave do EMM é a chave de atualização automática (AU). Se você não tem a chave EMM em sua lista e há uma mudança fundamental na a chave ECM (00 & 01) sua caixa não será atualizada automaticamente
e você terá que encontrar a nova chave em outro lugar. Se vocês tem a chave EMM correta para o canal, então a sua chave ECM irá atualizar para a nova chave.
Você pode considerar as teclas do ECM como manuais (você digita números e letras) e se tornam automáticos quando você tem corrija a chave EMM.
Espero que isso ajude você a entender como eles funcionam.
English
The EMM key is the Automatic Update (AU) key. If you do not have the EMM key in your list and there is a key change in the ECM (00 & 01) key your box will not update automatically and you will have to go find the new key elsewhere. If you have the correct EMM key for the channel then your ECM key will update to the new key.Please what is EMM? I swear I do not know what it is.
You can consider the ECM keys to be manual (you input the numbers and letters) and become automatic when you have the correct EMM key.
Hope this helps you understand how they work.
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
Re: EMM Keys Powervu Oscam
Vejam só: eu só consegui abrir os canais em Powervu no GTmedia GTC inserindo manualmente uma a uma no 58W. Embora os canais numa determinada frequência tenham a mesma chave os canais só abrem se vc colocar as chaves em cada um dos canais dessa frequência e como disse embora sejam as mesmas. Tem algum outro jeito? Espero resposta.
Re: EMM Keys Powervu Oscam
Como eu disse em um post anterior, o OSCAM requer muito mais trabalho, inicialmente. O SID de cada canal tem que estar na linha de código, quando você compõe sua lista, é fácil mudar a chave usando um editor de texto, usando a função replace. O que você está fazendo agora é a única maneira de fazer isso.
As I said in an earlier post, OSCAM requires a lot more work, initially. The SID of each channel has to be in the code line, when you have made up your list it is easy to change the key using a text editor, using the replace function. What you are doing now is the only way to do it.
As I said in an earlier post, OSCAM requires a lot more work, initially. The SID of each channel has to be in the code line, when you have made up your list it is easy to change the key using a text editor, using the replace function. What you are doing now is the only way to do it.
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
Re: EMM Keys Powervu Oscam
Buenas noches a los nobles colegas, usando los procedimientos arriba citados conseguí con que mi GTC funcionara con las llaves en EMM. Sin embargo con los Mux en Powervu de los canales de los satélites C1 / C3 y D1 él en encuentra las llaves, pero no abre los canales. Recordando que OSCAM está actualizado, es decir, está con la última actualización. ¿Qué es lo que está mal? Gracias.
Re: EMM Keys Powervu Oscam
Esos satelites al igual que MTN usan un CW que NO esta en los firmwares.