Let me explain you a little better because is not that easy as it seems. Still looking into that
V8 Super
You connect the decoder via WiFI or Ethernet as usual, you test that is working using youtube as example or if you have a dirty mind will use youporn
OK. It work I can stream
We can rename the STB to
yeyoyeyo-STB if we want
Then we activate SAT2IP to on
Then we do whatever but not power off the decoder dughh...
So The decoder now is a server streaming
To get that we can use VLC
Install it on MAC, android or Windows
We Go to LOCAL networks (be suer your device to replay is in THE SAME network the decoder is)
The Universal Plug 'n Play devices
upnp and you will see
yeyoyeyo-STB
clcik on there ans appear satellite channels and will list all your favorite channels or up to 128 is no FAV are selected
Click on any channels and enjoy! It that easy!!
However V9 Super is not
More or less the steps are the same
But on V9 Super the streaming is no longer on the format oh HTTP streaming but a RTP or RTPS format
I know I driving you nuts guys!! I know I am sorry
So the V* super stream as an URL like "
http://192.168.1.225:81/2264_0_1283_265 ... 1_101_2.ts"
fake link
Where 192.168.1.225 is the IP that the router assigned to the STB V8 Super
81 is te port open for streaming on your outer
and after that is the link created but the STB as SATIP server to get that that channel and in ts format
On V9Super
the http is replaced by rtps://etc etc
BUT the mAIN issue here that RTP AND RTPS uses port 554 on your router and that MUST BE opened
This is the same for people that have IP cameras and want to stream outside their houses.
So we need to open that port entering on the routers and assign that port to the STB does matter is doe snot go "outside" the world
I will give instruction on that you may call your ISP tech support or google it due so many routers and devices and each one has different steps and some can not be opened
So the STB now will be completely opened bi-directional on port 554 behind the NAT
So we GO back to say VLC as player
and we can see again
yeyoyeyo-STB ...
WRONG it shows somethin gelse like air(0,0.0)
and rpt errors becuase the server STB (V9 Super) script (software is worng) Programmer was drunk that night and forgot something
and the URL comes wrong that is WHY
yeyoyeyo is not working
1) The Server (I call server because the V9/8 Super becomes a server when you turn SATIP Function) is no longer streaming the way you name it (if you change the name) or the the default (Freesat V9 Super )
It shows AliServer(192.168.1.210) that is my intranet IP assigned by my router and I dont care if the name is different along I can Stream right?
click on that and shows ALL the channels
2) Like I said is
ALI's fault
these are the errors messages
A) VLC couldn't connect to "sat.ip:554"
check on that sat.ip (i explained the port already) sat.ip it does not say 192.168.1.210
that will screwed up all... guaranteed!
B) VLC is trying to open all channels
could not connect to: sat.ip/?src=1&freq=11973&pol=v&ro=0.35&msys=dvbs&mtype=qpsk&plts=off&sr=27500&fec=34&pids=0,17,18,420,4101,4102,8190
that is one of the channels
a
as you can see there is NO IP address and that is the reason is not working
I have a difficult 2 weeks ahead of me traveling, helping my kids at University and my wife with her business. I have no time for this
BUT
This issue is either
A coding on the V9 super that is not complete done (the Ali part tells me that) where a call function in the script is not being called, and the IP address is not being polutated
Or a settings on VLC that I missed
So far is not working for me either