GTMEDIA Forum

You may at some point, have to use a authorised receiver to keep the card updated, to be able to use in your receiver.

Den

With your last post you are shouting, do not do it.

Den

Try Aliexpress.

Den

Depends on what software you have on your receiver, if you have Mars and Press the (Info) button, the information is at the bottom of the screen.
Not to sure with normal software.

Den

A lot of the keys are built within the software of the receiver. When ever you find a feed, the keys change each time. If you had Mars software on the receiver you could view the codes found, by Pressing (PG+ / PG-) on the remote. I do not know if this can be done, upload the softcam to USB, then vi...

What Biss keys are you after, for what channels on what satellite.

Den

Let users know what satellite / channels.

Den

With the GTC Combo, i am having trouble with it, have lost the setting for 30w, will dig it out again and see if i can sort it to see if i can receive any HEVC channels. Wiped all details from the receiver and started again, with my dish already at 30w, hooked the receiver up carried out a scan, the...

This may help, Menu / Installation / OK / Move Curser to CA Information / Press 6666 on the remote / CS Protocol should come up / Move Curser to this press OK / What comes up should be, / Server Setting / Softcam Setting / OSCAM Configuration / Move the Curser to (Softcam Setting) / OK / Where you c...

This may help, have taken this from a V8Turbo which is a Terrestrial/Satellite receiver with normal software. When on a Terrestrial channel, Menu / TV Channel / The Curser should be on the channel that you were viewing. At the Bottom of the Screen should be as follows, Red Green Yellow Red Info/Hide...

It's been a while since the last update for the V8Turbo, i do not think there will be any more. I have only just noticed the V8X (RED) (which is new ) i do not know what this receiver has against other models. Other users may be able to let us both know what the difference is between the two models....

The V8X / V8UHD receiver's should meet your needs with normal software, (MARS software is for the KU band in Europe) plus you need to take a sub. Most of the Powervu / Biss keys will be within the software. Have a look around the forum, there will be threads about the said receivers and using them w...

The V8 Turbo is a old model, last update was Sept 2023, which may not have the correct insides to carry out what you require.
For what it does, it is a good receiver.
Check out (Aliexpress), for what you require, you may have to update to a newer model like the (V8X ECAMD RED).

Den

Give us more information, what satellites / channels do you wish to view. Depending on what you want to do, just using the GTMedia receivers to receive channels with the information built within the software you can get a lot of channels. You could set up your receiver to a single dish pointing just...

Glad to hear that you are now sorted.

Den

It's the same on other models that have Mars software, we will have to wait to see if the system works if/when there is a software update.
If you do not know, this site no longer supports Mars.

Den

What channels is that you require to reorder is it the Terrestrial ones. If it is the said channels, you will need to connect your Aerial cable, set your LCN to ON, then scan for the Terrestrial channels from your local transmitter. Checking a few files i found some info on Moving Channels with the ...

Depending on how many changes are required, you could use the remote, through the Channel list.
When the amendments have been carried out save your list to a USB.

Den

With this site no longer supporting Mars software, it has gone very quiet. There has been no updates for a very long time, why break it, if it is not broke. With you now using a V7Pro that works for you, just keep using it. There are just a few users who use the forum, to help others, support is the...

Can you confirm what receiver you have plus what software. Have had a look around the forum,, think that the receiver you have may be the V7Pro with normal software. With the search box, put in (scan a single transponder), have a look, you should find your answer, if not, confirm above. If your rece...

Have tried a few receivers this morning against transponder 11491V 7522, some of which had Mars software, ALL of which was getting NO SIGNAL. V8X / V7Pro / V8 Turbo / V7S2X / V7S5X. The only receiver that was getting a signal was the V8 UHD which had Mars software, after putting in ALL details, plus...

You could scan in your (Tivusat) channels first in order, than scan in the other transponders that you require, the channels should
be added at the end of the channel list, then you can sort these channels to order that you require, then save to USB.

Den

The decoder that can decode 4.2.2 is the GTCombo, even i you have the correct keys your receiver will not decode.

Den

Had a look at 13e 10719v 27500, on (Flysat) it is part of the (Platforma Canal +).
So i do not think it is part of the (Tivusat) package.
What are the names of the channels that are missing, you wish to view.

Den

What channels are missing, from what transponder.
Have you tried it to see what happens to your list. (save your list before you do)

Den