GTMEDIA Forum

Can you confirm what receiver that you have and with what software, then users will be able to explain how to put in your USALS details.

Den

Which V7S receiver do you have, V7S2X the last update for this receiver was 21 Sept 2023 V460.
The other V7S5X, this receiver was last updated 9 Nov 2023 V464.
For the Abertis channels, just scan in the transponders required, then put them in the order that you require them.

Den

The last update for this receiver with (OS) software was V249 30 Nov 2023. Which is on this forum. Before you carry out ANY UPDATE, you must SAVE your CHANNEL LIST ETC / ALSO the SOFTCAM (if you use that to decode some channels) to a USB, carry out the UPDATE then reinput your CHANNEL LIST / SOFTCAM...

Like with any card, you need to use a authorise receiver to keep you card up to date.

Den

I use this (HDMI Switch), when switching from a motor system (V8UHD) to a Diseq system (V8 Turbo), works just find, have been using
it for a while now,

Den

Within the receiver have you checked the (Scart Output) and the (Display Mode).
1. What software do you have on your receivers.
2. What was the purpose of the (HDMI Switch).

Den

With out a PC, you will be lost, have a word with a few of your friends, to see if they have a PC, or even a old one that they give you to use.
Then let us know what you require from the V8UHD receiver.

Den

You may at some point, have to use a authorised receiver to keep the card updated, to be able to use in your receiver.

Den

With your last post you are shouting, do not do it.

Den

Try Aliexpress.

Den

Depends on what software you have on your receiver, if you have Mars and Press the (Info) button, the information is at the bottom of the screen.
Not to sure with normal software.

Den

A lot of the keys are built within the software of the receiver. When ever you find a feed, the keys change each time. If you had Mars software on the receiver you could view the codes found, by Pressing (PG+ / PG-) on the remote. I do not know if this can be done, upload the softcam to USB, then vi...

What Biss keys are you after, for what channels on what satellite.

Den

Let users know what satellite / channels.

Den

With the GTC Combo, i am having trouble with it, have lost the setting for 30w, will dig it out again and see if i can sort it to see if i can receive any HEVC channels. Wiped all details from the receiver and started again, with my dish already at 30w, hooked the receiver up carried out a scan, the...

This may help, Menu / Installation / OK / Move Curser to CA Information / Press 6666 on the remote / CS Protocol should come up / Move Curser to this press OK / What comes up should be, / Server Setting / Softcam Setting / OSCAM Configuration / Move the Curser to (Softcam Setting) / OK / Where you c...

This may help, have taken this from a V8Turbo which is a Terrestrial/Satellite receiver with normal software. When on a Terrestrial channel, Menu / TV Channel / The Curser should be on the channel that you were viewing. At the Bottom of the Screen should be as follows, Red Green Yellow Red Info/Hide...

It's been a while since the last update for the V8Turbo, i do not think there will be any more. I have only just noticed the V8X (RED) (which is new ) i do not know what this receiver has against other models. Other users may be able to let us both know what the difference is between the two models....

The V8X / V8UHD receiver's should meet your needs with normal software, (MARS software is for the KU band in Europe) plus you need to take a sub. Most of the Powervu / Biss keys will be within the software. Have a look around the forum, there will be threads about the said receivers and using them w...

The V8 Turbo is a old model, last update was Sept 2023, which may not have the correct insides to carry out what you require.
For what it does, it is a good receiver.
Check out (Aliexpress), for what you require, you may have to update to a newer model like the (V8X ECAMD RED).

Den

Give us more information, what satellites / channels do you wish to view. Depending on what you want to do, just using the GTMedia receivers to receive channels with the information built within the software you can get a lot of channels. You could set up your receiver to a single dish pointing just...

Glad to hear that you are now sorted.

Den

It's the same on other models that have Mars software, we will have to wait to see if the system works if/when there is a software update.
If you do not know, this site no longer supports Mars.

Den

What channels is that you require to reorder is it the Terrestrial ones. If it is the said channels, you will need to connect your Aerial cable, set your LCN to ON, then scan for the Terrestrial channels from your local transmitter. Checking a few files i found some info on Moving Channels with the ...

Depending on how many changes are required, you could use the remote, through the Channel list.
When the amendments have been carried out save your list to a USB.

Den