GTMEDIA Forum

It's the same on other models that have Mars software, we will have to wait to see if the system works if/when there is a software update.
If you do not know, this site no longer supports Mars.

Den

What channels is that you require to reorder is it the Terrestrial ones. If it is the said channels, you will need to connect your Aerial cable, set your LCN to ON, then scan for the Terrestrial channels from your local transmitter. Checking a few files i found some info on Moving Channels with the ...

Depending on how many changes are required, you could use the remote, through the Channel list.
When the amendments have been carried out save your list to a USB.

Den

With this site no longer supporting Mars software, it has gone very quiet. There has been no updates for a very long time, why break it, if it is not broke. With you now using a V7Pro that works for you, just keep using it. There are just a few users who use the forum, to help others, support is the...

Can you confirm what receiver you have plus what software. Have had a look around the forum,, think that the receiver you have may be the V7Pro with normal software. With the search box, put in (scan a single transponder), have a look, you should find your answer, if not, confirm above. If your rece...

Have tried a few receivers this morning against transponder 11491V 7522, some of which had Mars software, ALL of which was getting NO SIGNAL. V8X / V7Pro / V8 Turbo / V7S2X / V7S5X. The only receiver that was getting a signal was the V8 UHD which had Mars software, after putting in ALL details, plus...

You could scan in your (Tivusat) channels first in order, than scan in the other transponders that you require, the channels should
be added at the end of the channel list, then you can sort these channels to order that you require, then save to USB.

Den

The decoder that can decode 4.2.2 is the GTCombo, even i you have the correct keys your receiver will not decode.

Den

Had a look at 13e 10719v 27500, on (Flysat) it is part of the (Platforma Canal +).
So i do not think it is part of the (Tivusat) package.
What are the names of the channels that are missing, you wish to view.

Den

What channels are missing, from what transponder.
Have you tried it to see what happens to your list. (save your list before you do)

Den

The said channels work OK with the said receiver, the keys are built within the software. It should be just scan the transponders required and view. Have hooked my GT Combo up, to see what i can get, not having much luck, getting a lot of (T2M1) transponders, also missing some transponders when a Bl...

The following GTMedia models support the (Abertis) package at 30w, V7Pro / V8 Turbo / V8X / V8UHD / V7S2X / V7S5X / GT Combo, all of which i have in use, for i view some of the channels from this package. Set up your dish, scan in the transponders required, start viewing, then put the channels into ...

If you have a (A/B Switch), you could use the two dishes, but only one at time.

Den

Have tried this with few receivers that have Mars software, at this time the system does not work.

Den

The best way that i know on getting a screen shoot is to get the picture you require on the TV, then use a (Digital Camera) take a photo, then upload onto your computer, then transfer to USB.
That is what i have done.

Den

Are these the sort of screen shoot you are after. With the channel working, Press (INFO) on the remote Twice, you will get two windows come to the screen with all info with the picture in the back ground. Press (INFO) this will take away the top window away, this will leave the Bottom window which w...

Having read your first post again, you say you have a set top box for internet channels, and the other for satellite.
How are these two boxes connected to your TV, are they used one at a time or both together.
Do you use the community satellite dish on any of your boxes.

Den

Depending on what software you have on your receiver, your LNBB setup page should look like these.
One is with Mars, the other normal software.

I forgot to ask, is your dish part of a community set up, or just a dish for your own use.

Den

Which (Astra), the one at 19e or 28e.
What transponders do you loss, can you confirm what your lnb setting page is like.
What software do you have on your receiver.

Den

What satellite are you on, is it a fix dish, what is your lnb setting within your receiver.
Have you checked all connections within your system, checked the skew of the LNB, has the dish moved.
With more information, users will be able to help.

Den

Have you tried the (TV Mode) on the remote, also you could try using the Scart output.
As said by another user, when changing the power adaptor make sure it is 12V 2A,
Just check that the batteries in the remote are OK.

Den

The last update Mars wise, was V8734 dated 8 Nov 2023.
You may have to look at the Mars (Facebook) page, to get the information required.

Den

In your other thread, i have put a question.

Den

Other forums are saying that the footprint is the (North sea Beam), on (Sat Beams) is showing as (Euro Spot 1).

Den