V7s nie uruchamia się - doesn't work.

[przeeemek1]

Jak w temacie. Nie uruchamia się v7s. Świeci się tylko zielona dioda.
Da radę reanimować go przez wgranie nowego softu czy raczej coś się spaliło?


v7s does not start. Only the green LED is on.

[CAJE]

The only solution is to use the RS232 cable if the upg doesn't work

[Feralkiwi]

You could try the flash.bin recovery method first.

Owen

[przeeemek1]

Not work. USB only blink 10 times.

[Feralkiwi]

Not work. USB only blink 10 times.

Remember to unpack the .zip folder and use the .bin file.
You must use the correct software for that unit.

Owen

[przeeemek1]

I did everything according to the guide. I've tried different ways. Neither works.
Is there any other way to upload the software?

[CAJE]

I already told you that there is only one solution, use RS232 cable

[przeeemek1]

Do you have any instructions? I understand that you have to connect directly to the motherboard? I saw that there are 3 pins.

[cpr43]

Do you have any instructions? I understand that you have to connect directly to the motherboard? I saw that there are 3 pins.

viewtopic.php?f=51&t=321

[Feralkiwi]

RS232 pin connections from board.

Owen

[przeeemek1]

Ok, I have rs232 --> USB cable and windows 10. I'm stuck on "please reset slave STB". I cannot start uploading the file.

[Feralkiwi]

Check you have the correct port number.

Here are my notes here on that.


Owen