Lost signal after few minutes
Moderators: admin, GTMedia Team
-
- Posts: 13
- Joined: Mon May 28, 2018 4:27 pm
Lost signal after few minutes
Hello. I bought second freesat v7s and when I turn it on it work properly about 5 min, after that signal is going to 0 and the screen is freeze. On the first one everything works good. Anybody had similar problem and found solution?
Re: Lost signal after few minutes
Using same firmware?? Have you tried loading a dump from the good one to the other one??your_daddy wrote: ↑Wed Apr 10, 2019 5:49 pmHello. I bought second freesat v7s and when I turn it on it work properly about 5 min, after that signal is going to 0 and the screen is freeze. On the first one everything works good. Anybody had similar problem and found solution?
-
- Posts: 13
- Joined: Mon May 28, 2018 4:27 pm
Re: Lost signal after few minutes
Yes the firmware is the same. When I turn it off and wait for w while and then turn it on it works fine for few minutes. When it frezze it looks similar like to high temperature on graphic card.
-
- Posts: 198
- Joined: Tue Oct 03, 2017 5:11 pm
Re: Lost signal after few minutes
Check the LNB, Switch or spliter, or check the cable from stb until the LNB.
-
- Posts: 13
- Joined: Mon May 28, 2018 4:27 pm
Re: Lost signal after few minutes
I checked on other instalation and it looks same.
Re: Lost signal after few minutes
Did you tried to load the full dump from the good one to the other??
-
- Posts: 13
- Joined: Mon May 28, 2018 4:27 pm
Re: Lost signal after few minutes
Yes, full dump with db and cccam.
Re: Lost signal after few minutes
Maybe defective unit.
-
- Posts: 13
- Joined: Mon May 28, 2018 4:27 pm
Re: Lost signal after few minutes
I mean all core.
-
- Posts: 13
- Joined: Mon May 28, 2018 4:27 pm
Re: Lost signal after few minutes
I noticed that channel with mpeg codec working without problem, but h264 codec channel is freezing.
-
- Posts: 11
- Joined: Wed Mar 27, 2019 11:50 am
Re: Lost signal after few minutes
+1 I have the same problem in V7S HD with firmware 01/04/2019, probably today I'll try to upgrade it to the last version to check if it works better...
If the problem is the codec maybe we have a resolution soon.
If the problem is the codec maybe we have a resolution soon.
-
- Posts: 11
- Joined: Wed Mar 27, 2019 11:50 am
Re: Lost signal after few minutes
After updating to the release of 16/04/2019 it continues fauling after 30-35 minutes. But I tested it with 2 installation and when the signal is near to 100% it freezes quickly but with the signal of 70-75% the receiver remains stable.
Re: Lost signal after few minutes
It sounds like a heat problem to me, try a fan close to the vent holes, that mite help.
-
- Posts: 11
- Joined: Wed Mar 27, 2019 11:50 am