no se deja actualizar
Moderators: admin, GTMedia Team
no se deja actualizar
Good Afternoon, this is the fifth Gtmedia v7s HD that I prepare but when I access TOOLS> USB UPGRADE> I do not get the file.bin neither in Allcodes nor in Main Code. I've done several Factory settings and it's still the same. I have used different USB Pendrives and I can not update either.
Re: no se deja actualizar
Because you do not try to do a clean installation.
You take a firmware and you name it flash
Procedure to follow:
1. Without touching the extension .bin, we put it in the root of a pendrive and connect it to the receiver's USB.
2. We turn off the receiver of the current.
3. We connect it again to the current and then press repeatedly the MENU key on the remote control
4. We will get a message on the screen that says "Usb upgrade, do not turn off" and we can stop pressing the MENU button on the remote
5. Recovery and the receiver will restart only.
You take a firmware and you name it flash
Procedure to follow:
1. Without touching the extension .bin, we put it in the root of a pendrive and connect it to the receiver's USB.
2. We turn off the receiver of the current.
3. We connect it again to the current and then press repeatedly the MENU key on the remote control
4. We will get a message on the screen that says "Usb upgrade, do not turn off" and we can stop pressing the MENU button on the remote
5. Recovery and the receiver will restart only.