Should programs be watched by C-band or Ku-band?
If both bands are to be watched, the system would have to be equipped with two satellite antennas and be upgraded with DiSEqC switches or matching multiswitches. This would also be the appropriate settings on the receiver to be made. For example for the Ku-band LNB with DiSEqC1.0 on port 1 and for the Dish with the C-band LNB on port 2
______________________________________
Information about language menu: English
The settings on the receivers, under logical conditions, should be identical on the whole. Press Menu, go to install, select satellite list, add satellite, name satellite and position (for example Paksat1R-Ku) and confirm. Go to lnb frequency and enter the data from the nameplate of the Ku-band LNB. Under DiSEqC 1.0, select Port1 and save. Now you search on the screen the entry transponder and enter there the transponder data, suitably to the LNB (go google and search for "Paksat1R Lyngsat"). The same you do for the antenna belonging to the C-band LNB (Paksat1R-C E38 ° DiSEqC 1.0 Port: 2)
But you can also make a blind search immediately after entering the satellite name, the LNB frequency and the DiSEqC port.
Important for a successful search, the satellite dish must be aligned with the correct satellite
Best regards pegasus07