GTMedia V7S HD new firmware(17/05/2019)
Beitrag Mi Jan 31, 2018 4:31 am
-Freesat_v7S.bin
Notice: Please do the following steps :
1) backup the channel list(user db).
2) export the softcam.key to usb device
3) update the firmware to box by allcode mode
4) update channel list then import softcam.key
how to update Firmware
Moderators: admin, GTMedia Team
how to update Firmware
Don Quijote for satellite systems
Re: how to update Firmware
Here's a suggestion for a better update guide:pegasus07 wrote: ↑Wed May 22, 2019 9:41 amGTMedia V7S HD new firmware(17/05/2019)
Beitrag Mi Jan 31, 2018 4:31 am
-Freesat_v7S.bin
Notice: Please do the following steps :
1) backup the channel list(user db).
2) export the softcam.key to usb device
3) update the firmware to box by allcode mode
4) update channel list then import softcam.key
Please do the following steps:
1) backup allcode (if you want to keep your original software)
2) backup the channel list (user db).
3) backup the channellist & system
(user db + system data)
4) export the softcam.key to usb device
5) update the desired firmware to box by allcode mode
6) update channel list or channellist + systemdata
then import softcam.key
So the receiver owner will not lose any relevant data
This suggestion should not only apply to the V7S receiver
I hope you can consider the wishes of your users!
It might do some work, but it would be in the interest of your users.
Incidentally, I am not the only one who has already lost data due to this incomplete manual
Best regards pegasus07
Don Quijote for satellite systems
Re: how to update Firmware
Upgrade file i put inside USB Stick. But box showing no file. Please someone help me.
- Attachments
-
- 1558790590960175101383246955191.jpg (3.89 MiB) Viewed 1183 times
Re: how to update Firmware
Factory Reset is recommended after step#5pegasus07 wrote: ↑Wed May 22, 2019 10:07 amHere's a suggestion for a better update guide:pegasus07 wrote: ↑Wed May 22, 2019 9:41 amGTMedia V7S HD new firmware(17/05/2019)
Beitrag Mi Jan 31, 2018 4:31 am
-Freesat_v7S.bin
Notice: Please do the following steps :
1) backup the channel list(user db).
2) export the softcam.key to usb device
3) update the firmware to box by allcode mode
4) update channel list then import softcam.key
Please do the following steps:
1) backup allcode (if you want to keep your original software)
2) backup the channel list (user db).
3) backup the channellist & system
(user db + system data)
4) export the softcam.key to usb device
5) update the desired firmware to box by allcode mode
6) update channel list or channellist + systemdata
then import softcam.key
So the receiver owner will not lose any relevant data
This suggestion should not only apply to the V7S receiver
I hope you can consider the wishes of your users!
It might do some work, but it would be in the interest of your users.
Incidentally, I am not the only one who has already lost data due to this incomplete manual
Best regards pegasus07
@yehtutbo
Only the plain *.bin file in the root of the USB. MAke sure there is not a folder and them the file inside. Move the file to the root
Re: how to update Firmware
Did you unpack the file?
You can only copy the pure .bin file to your USB stick. Please not in a folder, then the receiver can not recognize the file
Best regards pegasus07
Don Quijote for satellite systems