jamesbargains wrote: ↑Tue May 28, 2019 9:14 pm
does anyone have a channel list or know how to make one so i can use a channel to help with the signal
many thanks
j
With v7s you can choose a PID Scan ( only one channel - Video-Audio-PCR PID ) mode.
For this you have to create a Satellite first.
You call in your case Paksat 1R.
Then you press the "SAT" key and you are in the transponder menu and press the red button (add Transponder)
!!! Now you enter the suitable transponder data. If that does not work and the receiver shows out-of-range, you will need to enter your correct LNB data first, which you will find on the nameplate of the LNB. !!!!
Now pay attention to the DiSEqC settings. If you only have one satellite, you do not need to enter anything there.
Position the cursor on the desired transponder. press the blue button for search. Cursor to scan mode select Normal or PID. You can find these PID values when you google, or at Lyngsat. I forgot that, please turn off the network search.
Best regards pegasus07