V7S new firmware(13/06/2019) - problem

V7 TT Pro / V7S HD /V7 Plus/V7 S2X /V7PRO/ V7 TT

Moderators: admin, GTMedia Team

luiluigi
Posts: 9
Joined: Wed Jun 27, 2018 8:15 pm

V7S new firmware(13/06/2019) - problem

Post by luiluigi »

Hi
Just updated my two v7s receivers to latest firmware (13/06/2019) and I am extremaly disapointed.
Both boxes are working onlY for 1-2 min and after that encription problem appear.
I have to change chanell to make it working again for another 1-2 min
I'm using box with Polish chanells (Hotbird 13E) on cccam.
Tried downgrade to GTMedia_V7S_Europe_UI_20181105 - impossible.
At the moment can't watch tv.
Why there is no warning that downgrade after upgrade will NOT be possible?
How can I downgrade firmware to old one?

Regards
Last edited by luiluigi on Mon Jun 24, 2019 11:04 pm, edited 1 time in total.

luciform
Posts: 15
Joined: Sat Jun 01, 2019 5:41 pm

Re: V7S new firmware(13/06/2019) - problem

Post by luciform »

Did you try recovery?

User avatar
cpr43
网站管理员
Posts: 7046
Joined: Thu Aug 11, 2016 1:41 pm

Re: V7S new firmware(13/06/2019) - problem

Post by cpr43 »

Something is strange

09/04/2019 or 13/06/2019? Go here for latest

viewtopic.php?f=39&t=6025

Do a factory reset after upgrading

luiluigi
Posts: 9
Joined: Wed Jun 27, 2018 8:15 pm

Re: V7S new firmware(13/06/2019) - problem

Post by luiluigi »

Sorry (mistake in 1st post) updated to 13.06.19 and I did factory reset - still same
can't downgrade as well

User avatar
cpr43
网站管理员
Posts: 7046
Joined: Thu Aug 11, 2016 1:41 pm

Re: V7S new firmware(13/06/2019) - problem

Post by cpr43 »

luiluigi wrote:
Mon Jun 24, 2019 11:02 pm
Sorry (mistake in 1st post) updated to 13.06.19 and I did factory reset - still same
can't downgrade as well
Put the 13.06.19 file in an USB. Rename the file to flash.bin. Load USB to box. Unplug the box. Plug back while at the same time pressing MENU in your remote control. You will see the upgrade process in the front. Wait until finished

claudiney ribeiro
Posts: 7
Joined: Tue Mar 26, 2019 2:14 pm

Re: V7S new firmware(13/06/2019) - problem

Post by claudiney ribeiro »

no meu não tou conseguindo importar a softcam.key

in my case I can not import the softcam.key

User avatar
cpr43
网站管理员
Posts: 7046
Joined: Thu Aug 11, 2016 1:41 pm

Re: V7S new firmware(13/06/2019) - problem

Post by cpr43 »

claudiney ribeiro wrote:
Tue Jun 25, 2019 1:42 pm
no meu não tou conseguindo importar a softcam.key

in my case I can not import the softcam.key
Make sure you save as over the original Softcam.key file.
Also, make sure it is name Softcam.key and not Softcam.key.key

claudiney ribeiro
Posts: 7
Joined: Tue Mar 26, 2019 2:14 pm

Re: V7S new firmware(13/06/2019) - problem

Post by claudiney ribeiro »

eu cloquei algumas chaves biss ele e depois exportar para usb na hora de voltar a chaves da falha como resolver isso



I clucked a few keys biss it and then export to usb at the time of returning the keys to the crash how to solve this

User avatar
Feralkiwi
网站管理员
Posts: 8339
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: V7S new firmware(13/06/2019) - problem

Post by Feralkiwi »

The unit will save the softcam file as "export_softcam.key"
You need to use a PC to rename it just "softcam.key" to reload it

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

claudiney ribeiro
Posts: 7
Joined: Tue Mar 26, 2019 2:14 pm

Re: V7S new firmware(13/06/2019) - problem

Post by claudiney ribeiro »

ja fiz isso também da falha ao importar softcam.key


I already made this also from the failure to import softcam.key

Cabelo doido
Posts: 73
Joined: Sat Jan 27, 2018 6:00 pm
Location: Bahia, Brasil
Contact:

Re: V7S new firmware(13/06/2019) - problem

Post by Cabelo doido »

Quando joga para a Usb fica assim, export_softcam.key é só apagar export ou renomear deixando apenas softcam.

claudiney ribeiro
Posts: 7
Joined: Tue Mar 26, 2019 2:14 pm

Re: V7S new firmware(13/06/2019) - problem

Post by claudiney ribeiro »

bom dia amigos também não deu certo.também já voltei firmware mesmo Asim da falha

Good morning friends also did not work. I also came back firmware same Asim to fail

Astron888
Posts: 60
Joined: Wed Oct 17, 2018 4:33 pm

Re: V7S new firmware(13/06/2019) - problem

Post by Astron888 »

Olá Claudiney Ribeiro,acredito que haja alguma falha na sua inserção das chaves e como na importação porque se seguires bem a explicação do Cpr43 e Owen não falhará nada e será muito simples assim.Boa sorte amigo

claudiney ribeiro
Posts: 7
Joined: Tue Mar 26, 2019 2:14 pm

Re: V7S new firmware(13/06/2019) - problem

Post by claudiney ribeiro »

eu coloquei manualmente algumas chaves biss ai exportei para o usb.ai no pc renomeei para softcam.key.depois apaguei a do aparelho ai tentei importar a do pen drive que foi a q eu exportei do aparelho mesmo asim da falha agora vou tenta com outro pen drive pra ver

Astron888
Posts: 60
Joined: Wed Oct 17, 2018 4:33 pm

Re: V7S new firmware(13/06/2019) - problem

Post by Astron888 »

Boa noite amigo,realmente até ai está tudo correcto e agora tenta outra pen para veres qual será o resultado.Depois desta última atualização também deparei com um caso semelhante que foi a da box ficar no “load” só me safei-me depois de trocar da pen com muita insistência e seguir os passos dos colegas acima referidos.Boa sorte

Jehisonn
Posts: 16
Joined: Tue Apr 09, 2019 8:10 pm
Location: Colombia

Re: V7S new firmware(13/06/2019) - problem

Post by Jehisonn »

you've already checked the antenna signal

claudiney ribeiro
Posts: 7
Joined: Tue Mar 26, 2019 2:14 pm

Re: V7S new firmware(13/06/2019) - problem

Post by claudiney ribeiro »

oi pessoal troquei o pen drive tambem da falha ao importar a softcam.key ja fiz tuto q os amigos me ensino. mais nada de da certo

Astron888
Posts: 60
Joined: Wed Oct 17, 2018 4:33 pm

Re: V7S new firmware(13/06/2019) - problem

Post by Astron888 »

Olá,opa se já experimentaste tudo alguma falha pode ainda existir,tenta fazer o factory setting mas antes fazes o backup de tudo numa pen para não perderes e tenta recomeçar tudo denovo.Boa sorte

mdmoore
Posts: 1
Joined: Wed Jul 03, 2019 1:56 pm

Re: V7S new firmware(13/06/2019) - problem

Post by mdmoore »

i can't download the latest upgrade. When I hit the link nothing happens

Astron888
Posts: 60
Joined: Wed Oct 17, 2018 4:33 pm

Re: V7S new firmware(13/06/2019) - problem

Post by Astron888 »

Check your internet,before you can try it again.Good luck

Monlo
Posts: 17
Joined: Sun Oct 30, 2016 1:07 pm

Re: V7S new firmware(13/06/2019) - problem

Post by Monlo »

Links are still working,ensure your internet service is working and also make sure your IP is not banned to access the site as well log in with your username to forge ahead.

asifnazir
Posts: 2
Joined: Wed Feb 06, 2019 10:29 am

GTMedia V7S HD new firmware

Post by asifnazir »

GTMedia V7S HD new firmware NEW software HELPPPPPPPPPPPPPPPP :roll: :roll: :roll: :roll: :roll: :roll: :roll:

Astron888
Posts: 60
Joined: Wed Oct 17, 2018 4:33 pm

Re: V7S new firmware(13/06/2019) - problem

Post by Astron888 »

Hello friend,just be patient.🙂🙂🙂🙂🙂

bodger
Posts: 1
Joined: Wed Jul 17, 2019 5:03 pm

Re: V7S new firmware(13/06/2019) - problem

Post by bodger »

is there an update for cable area instead of the terestrial

regards

Sajid3899
Posts: 8
Joined: Wed Jul 17, 2019 11:29 am
Location: Srinagar

Re: V7S new firmware(13/06/2019) - problem

Post by Sajid3899 »

May I know software version

Post Reply

Return to “GTMEDIA V7 SERIES”