Startup thread

V7 TT Pro / V7S HD /V7 Plus/V7 S2X /V7PRO/ V7 TT

Moderators: admin, GTMedia Team

Post Reply
jstewartp
Posts: 22
Joined: Fri Nov 08, 2019 12:10 am

Startup thread

Post by jstewartp »

Is there a step by step guide for newbies?

CajunSpice
Posts: 21
Joined: Fri Oct 04, 2019 3:49 pm

Re: Startup thread

Post by CajunSpice »

What do you need help with?
Setting up the box or the whole process?
Like dish to lines to STB receiver?

jstewartp
Posts: 22
Joined: Fri Nov 08, 2019 12:10 am

Re: Startup thread

Post by jstewartp »

I need the whole process. Should I put dish on sat then blind scan? Are there keys to download?

User avatar
Feralkiwi
网站管理员
Posts: 8341
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Startup thread

Post by Feralkiwi »

First find what satellite your dish is pointing at. Also what Low Freq your LNB has. The LNB is the lump on the dish.
Then set up your sat on the sat list from one that is listed there or do a "ADD".
Then set up the setting for that sat, LNB low freq. If you have only one dish and it is fixed the leave the DiSEqC setting at disabled.
If you have a motor dish then you need to set for that, another discussion.
After you have the antenna settings done, do a blind scan.

If you do not know what sat and what low freq, just set up any sat on the list and set the LNB Low freq to 9750/10600 for small solid dish, or 5150 for a large mesh dish and blind scan it.
You can then look at what channels you got and look at sites like lyngsat.com to see what sat you are pointing at.

Good luck.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

JAMALIT83
Posts: 14
Joined: Fri Nov 29, 2019 7:12 am

Re: Startup thread

Post by JAMALIT83 »

I manage to find few Sat and received FTA from these satelite, how to watch the locked $$$ channel?

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: Startup thread

Post by cpr43 »

jstewartp wrote:
Fri Nov 08, 2019 1:25 am
Is there a step by step guide for newbies?
viewtopic.php?f=67&t=12411

viewtopic.php?f=67&t=12405

Dadss
Posts: 12
Joined: Thu Nov 28, 2019 6:03 am

Re: Startup thread

Post by Dadss »

I need help to

Post Reply

Return to “GTMEDIA V7 SERIES”