3860H @131w
Moderators: admin, GTMedia Team
3860H @131w
On my V7S HD 2 of these channels are open, the rest aren't. Can the other channels in the Mux be lit up as well?
Re: 3860H @131w
Try re-scanning that mux and see if that helps.
Re: 3860H @131w
Thanks. I got your PM. I will give that a shot and see what happens.
Last edited by 901 on Wed Feb 12, 2020 12:36 am, edited 1 time in total.
Re: 3860H @131w
3940 H on this same satellite, 131w, is there any way to light this up? This mux used to light up when it was at 127w, but not lighting up for me at 131w.
Re: 3860H @131w
any chance you can PM me with the info too ,3860 scans in but only 2 channels open
thank you
thank you
Re: 3860H @131w
3940 H lit up but not 3860 just 2 lits up on there since there clear could you pm me too please get all of 3860
Re: 3860H @131w
As to 3860 H, does anyone ever have issues with this signal? The signal is not stable for me. During the day this signal won't even lock. Maybe it's on my end, I don't know. My wife likes a particular channel in the Mux, where that same channel is also in the 3940 H Mux, thus why I'm hoping to get that Mux lit up. Maybe that signal will be more stable for me than 3860 H is.
Re: 3860H @131w
i have started having issues with some signals too ,started several months ago, i believe it is T.I. from a cell site or something because i tried several receivers.changed the cable,tried a new LNBF and re-aimed the dish with no improvements .
this was talked about in an earlier post, i did try one other solution someone sent me,it helped a little,he said to put a piece of screen or foil around the feedhorn scalar ring ,about an inch past the existing ,
also if someone can PM me with the key info for this T.P. on 131 , i wouldn't mind since when i do get signal only the two in the clear open up
this was talked about in an earlier post, i did try one other solution someone sent me,it helped a little,he said to put a piece of screen or foil around the feedhorn scalar ring ,about an inch past the existing ,
also if someone can PM me with the key info for this T.P. on 131 , i wouldn't mind since when i do get signal only the two in the clear open up
-
- Posts: 37
- Joined: Fri Jan 25, 2019 6:38 pm
Re: 3860H @131w
I've actually had issues with the signal too. The dish has a strong lock, then boom! Nothing. Eventually, the signal will come back, but takes awhileMarantz wrote: ↑Mon Feb 03, 2020 1:19 pmi have started having issues with some signals too ,started several months ago, i believe it is T.I. from a cell site or something because i tried several receivers.changed the cable,tried a new LNBF and re-aimed the dish with no improvements .
this was talked about in an earlier post, i did try one other solution someone sent me,it helped a little,he said to put a piece of screen or foil around the feedhorn scalar ring ,about an inch past the existing ,
also if someone can PM me with the key info for this T.P. on 131 , i wouldn't mind since when i do get signal only the two in the clear open up
Re: 3860H @131w
Hi, I'm new here and to this type of TV.
I'm not receiving any signal on one side at all
On the other I get the weather channel and first Nations.. there's signals on the other channels but they don't lite up.. I'm not sure that helps you..I hope so.
I'm also looking for the keys for 131 3860/3000
Thank you
Dusty
I'm not receiving any signal on one side at all
On the other I get the weather channel and first Nations.. there's signals on the other channels but they don't lite up.. I'm not sure that helps you..I hope so.
I'm also looking for the keys for 131 3860/3000
Thank you
Dusty
Re: 3860H @131w
That sounds like the scew is off just a bit on your LNB, or you have a bad cable end.r.glidewell70 wrote: ↑Wed Feb 05, 2020 6:24 amI've actually had issues with the signal too. The dish has a strong lock, then boom! Nothing. Eventually, the signal will come back, but takes awhileMarantz wrote: ↑Mon Feb 03, 2020 1:19 pmi have started having issues with some signals too ,started several months ago, i believe it is T.I. from a cell site or something because i tried several receivers.changed the cable,tried a new LNBF and re-aimed the dish with no improvements .
this was talked about in an earlier post, i did try one other solution someone sent me,it helped a little,he said to put a piece of screen or foil around the feedhorn scalar ring ,about an inch past the existing ,
also if someone can PM me with the key info for this T.P. on 131 , i wouldn't mind since when i do get signal only the two in the clear open up
Re: 3860H @131w
I don't think it's my equipment as the other sats come in ok.. it's as if half of 131 is dead.
I do receive two clear , weather channel, and first Nations.. could someone please PM me the keys?
I do receive two clear , weather channel, and first Nations.. could someone please PM me the keys?
Re: 3860H @131w
I'm sorry I'm not up to speed on the site.. I'm new to all this, and 70 yrs old, do I'm not too net wise.
I've installed a fta dish .. trying to save some money.. I've noticed I've lost the 132 v .. the V works on all other birds.. am I the only one having this issue? Thank you..please excuse my ignorance
I've installed a fta dish .. trying to save some money.. I've noticed I've lost the 132 v .. the V works on all other birds.. am I the only one having this issue? Thank you..please excuse my ignorance
Re: 3860H @131w
Go into the menu and find your Antenna setup, check to see that you have= Polarity = set to Auto, if not you will only get H or V, what ever is showing in the Polarity window.Dusty wrote: ↑Mon Feb 10, 2020 1:49 amI'm sorry I'm not up to speed on the site.. I'm new to all this, and 70 yrs old, do I'm not too net wise.
I've installed a fta dish .. trying to save some money.. I've noticed I've lost the 132 v .. the V works on all other birds.. am I the only one having this issue? Thank you..please excuse my ignorance
Re: 3860H @131w
Hi,
I checked and the polarity is set. I've let the channel set for four hours, .. deleted and rescanned.. still nothing.. I'm sure it's me not the equipment
I checked and the polarity is set. I've let the channel set for four hours, .. deleted and rescanned.. still nothing.. I'm sure it's me not the equipment
Re: dual LNB horn
Hi, I have a dual LNB horn, am I better to have a single LNB that switches?
Now I have to scan each side, making two lists, one V, one H..
I know how to use it this way but thought it might be easier with one
Now I have to scan each side, making two lists, one V, one H..
I know how to use it this way but thought it might be easier with one
Re: dual LNB horn
Hi, I have a dual LNB horn, am I better to have a single LNB that switches?
Now I have to scan each side, making two lists, one V, one H..
I know how to use it this way but thought it might be easier with one
Now I have to scan each side, making two lists, one V, one H..
I know how to use it this way but thought it might be easier with one
Re: 3860H @131w
Can I please get the keys for this transponder also.