V7S and Intelsat 907
Moderators: admin, GTMedia Team
V7S and Intelsat 907
Hi
Can the V7S decode SATBACK? I have entered the BISS codes for each of the channels, but get no results on scan. Do I need to add VPID, APID, PCR PID?
Any help gratefully received
Can the V7S decode SATBACK? I have entered the BISS codes for each of the channels, but get no results on scan. Do I need to add VPID, APID, PCR PID?
Any help gratefully received
Re: V7S and Intelsat 907
The GTMEDIA receivers are not very good at receiving/decoding the channels from this satellite. (This is just me), other satellites OK.
There is a way to get the channels but it is a long winded way to get them, (I have tried, but only got one channel to work at a time, will not work when you change channel) (all because ALL channels are one transponder).
There may be members on here who got this to work with there receivers, who should reply to help you in this area.(softcam)
You will need to have the (DB EDITOR TOOL) which is in the (download section) for your receiver to help you.
I hope other members may be able to help.
Den
There is a way to get the channels but it is a long winded way to get them, (I have tried, but only got one channel to work at a time, will not work when you change channel) (all because ALL channels are one transponder).
There may be members on here who got this to work with there receivers, who should reply to help you in this area.(softcam)
You will need to have the (DB EDITOR TOOL) which is in the (download section) for your receiver to help you.
I hope other members may be able to help.
Den
Re: V7S and Intelsat 907
Thanks Stretch ... knowing it isn't easy is as good an incentive to carry on as any...!
Re: V7S and Intelsat 907
Not only the V7s or any other STB will scan in those channels. Ku Band BBC channels will not scan in in any box. They are hidden inside the stream. You will need to enter them using a channel editor. There are some post that explained how. You can also use the SEARCH bar in the upper right corner. Just enter BBC channels in search
viewtopic.php?f=33&t=14249&p=57652&hili ... nel#p57652
viewtopic.php?f=32&t=449&p=32238&hilit= ... nel#p32238
Re: V7S and Intelsat 907
Many thanks - I'll get onto it (as soon as I'm allowed time )....
Re: V7S and Intelsat 907
I am giving this another go, have been playing with the db edit this afternoon for the last couple of hours (good job i'm retired).
As yet no joy, but will keep at it over the weekend, will update as I go along.
Den
As yet no joy, but will keep at it over the weekend, will update as I go along.
Den
Re: V7S and Intelsat 907
You are a star ... I too am retired, but somehow have less time than when I worked....
Re: V7S and Intelsat 907
I have been trying again to find out if I can get the picture/sound of these channels.
I have used various permutations via the db edit, and have had NO LUCK what so ever, I know that the keys are correct because the channels decode ok on my xxxxxxxxcxxx receiver, I can receive these channels in the UK.
If and when other members see this post and got the channels to work, could you post your findings to help other members in the same boat.
Thanks to all
Den
I have used various permutations via the db edit, and have had NO LUCK what so ever, I know that the keys are correct because the channels decode ok on my xxxxxxxxcxxx receiver, I can receive these channels in the UK.
If and when other members see this post and got the channels to work, could you post your findings to help other members in the same boat.
Thanks to all
Den
Re: V7S and Intelsat 907
The way I would start this would be to scan a TP that is similar and then change the TP info to the match TP with the hidden channels and then re number the SID, Vpid Apid etc of the channesl to match the hidden stuff.STRETCH wrote: ↑Sat Jan 18, 2020 10:36 amI have been trying again to find out if I can get the picture/sound of these channels.
I have used various permutations via the db edit, and have had NO LUCK what so ever, I know that the keys are correct because the channels decode ok on my xxxxxxxxcxxx receiver, I can receive these channels in the UK.
If and when other members see this post and got the channels to work, could you post your findings to help other members in the same boat.
Thanks to all
Den
That way all the normal channel stuff in already in the editor.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: V7S and Intelsat 907
This is what I did, found a transponder with similar details, then with the db edit I amended the (1) v_pid /(2) a_pid1 /(3) p_pid /(4) tv_flag /(5) is_scramble /(6) ecm_num. Using CHANNEL 5 HD INFO as follows, (1) 7001 (2) 7002 (3) 7001 (4) 1 (5) 1 (6) 1.
Have tried various things in the (a_type1 and a_type2) of the db edit slots but no luck, the video is H264 / audio MPEG 4.
What other slots should be amended in the db edit to get this to work ie s_id / bq_flag. If we can get this work can this info be put in the (download section) as a stickie for other members.
Den
Have tried various things in the (a_type1 and a_type2) of the db edit slots but no luck, the video is H264 / audio MPEG 4.
What other slots should be amended in the db edit to get this to work ie s_id / bq_flag. If we can get this work can this info be put in the (download section) as a stickie for other members.
Den
Re: V7S and Intelsat 907
If TP and channels are similar specs you only change Vpid Apid Pid and sid. No need to change additional values. The TP that you copy from need to be same Video Type, Audio type and scrambled type (Biss) thou.STRETCH wrote: ↑Mon Jan 20, 2020 9:32 amThis is what I did, found a transponder with similar details, then with the db edit I amended the (1) v_pid /(2) a_pid1 /(3) p_pid /(4) tv_flag /(5) is_scramble /(6) ecm_num. Using CHANNEL 5 HD INFO as follows, (1) 7001 (2) 7002 (3) 7001 (4) 1 (5) 1 (6) 1.
Have tried various things in the (a_type1 and a_type2) of the db edit slots but no luck, the video is H264 / audio MPEG 4.
What other slots should be amended in the db edit to get this to work ie s_id / bq_flag. If we can get this work can this info be put in the (download section) as a stickie for other members.
Den
Re: V7S and Intelsat 907
I am just off to the airport for a weeks holiday in the sun, as soon as I get back I will up date .
Den
Den
Re: V7S and Intelsat 907
I am back, after a week in the sun. Have been trying to get this to work on my V8 NOVA ORANGE.
To date I have not been able to get any were near to work.
Went to other satellites and scanned in BISS channels to the 27.5w on the receiver, uploaded the info to USB, then amended channel name / v_pid /a_pid / p_pid, imported this info back into the receiver, added the biss codes against each of the channels, NO SUCH LUCK.
Can other members have a go, for i must be missing something simple.
Den
To date I have not been able to get any were near to work.
Went to other satellites and scanned in BISS channels to the 27.5w on the receiver, uploaded the info to USB, then amended channel name / v_pid /a_pid / p_pid, imported this info back into the receiver, added the biss codes against each of the channels, NO SUCH LUCK.
Can other members have a go, for i must be missing something simple.
Den
Re: V7S and Intelsat 907
I will say to just try with (1) channel. Keep in mind some channels are DVB-S, DVB-S2 , FEC (2/3, 3/4, 5/6 etc) , H.264, H.265 etc. Also, Need to be Biss coded. Once you find one that meet all the specs do the copy and modify the Apid,Vpai, Ppid. Once you scan, modify and re-load the DB proceed to add (enter) the Biss code for it.STRETCH wrote: ↑Wed Jan 29, 2020 6:10 pmI am back, after a week in the sun. Have been trying to get this to work on my V8 NOVA ORANGE.
To date I have not been able to get any were near to work.
Went to other satellites and scanned in BISS channels to the 27.5w on the receiver, uploaded the info to USB, then amended channel name / v_pid /a_pid / p_pid, imported this info back into the receiver, added the biss codes against each of the channels, NO SUCH LUCK.
Can other members have a go, for i must be missing something simple.
Den
Re: V7S and Intelsat 907
This is an updated table for channels. Look for video type, sids, etc and see if they match with yours
Intelsat 907 @ 27.5° West 11495 V 44100 9/10 DVB-S2/QPSK
Intelsat 907 @ 27.5° West 11495 V 44100 9/10 DVB-S2/QPSK
- Attachments
-
- BBC.jpg (210.05 KiB) Viewed 3304 times
Re: V7S and Intelsat 907
The info that I have been using is the same as of the above post by (cpr43) from (flysat).
Have been trying for most of the day to get this to work.
With just one channel (BBC 1 SD) I have tried various combinations and with the biss codes confirmed.
If members in the areas of Canary Islands / Algarve / South Spain who receive the said channels with any of the GTMEDIA receivers and decode the channels via the (softcam) CAN YOU ADD to the board, HOW you get this to work, so that other members in the future who buy these receivers who wish to receive these channels, will be able to.
I do not need to receive these channels (I am in the uk), I through I may be able to get this done to help others.
I know of a receiver that decodes these channels, with a little work round, but there is no longer support for these receivers.
Thanks to all who can add.
Den
Have been trying for most of the day to get this to work.
With just one channel (BBC 1 SD) I have tried various combinations and with the biss codes confirmed.
If members in the areas of Canary Islands / Algarve / South Spain who receive the said channels with any of the GTMEDIA receivers and decode the channels via the (softcam) CAN YOU ADD to the board, HOW you get this to work, so that other members in the future who buy these receivers who wish to receive these channels, will be able to.
I do not need to receive these channels (I am in the uk), I through I may be able to get this done to help others.
I know of a receiver that decodes these channels, with a little work round, but there is no longer support for these receivers.
Thanks to all who can add.
Den
Re: V7S and Intelsat 907
I find that if you start from the channel you want to code and go to the biss menu and press "ADD" all the info is there, Sid, Freq, SR etc and all you need do is delete the 16 x zeros and type your code in.
Sometime you get lost as the SID etc can be displayed in Dec and the entry needs Hex.
SID 200 Dec is then entered as Hex C8. The ADD feature is way easier.
Owen
Sometime you get lost as the SID etc can be displayed in Dec and the entry needs Hex.
SID 200 Dec is then entered as Hex C8. The ADD feature is way easier.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: V7S and Intelsat 907
Been having another go to try and get this to work, just using the HD channels, HAVE GOT IT TO WORK using the db editor.
Using BBC ONE HD.
(1)v_pid= 6601 / (2)a_pid= 6602 / (3)a_type 1= AAC / (4)a_pid 2= 1 / (5)a_type 2= AAC / (6) p_pid = 6601 (7)tv flag= 1 / (8)is_scramble= 1
(9)sid = 17540 / (10)ecm= 1.
I found a BISS channel on 3E with similar specs, using the (loop - through) of another receiver I scanned in that transponder to my V8 NOVA ORANGE,
using the db editor I amended the info as above.
Then went to the keys section to add a line in the BISS KEYS, against the said channel, when you add a line ( transponder details are shown)
SERVID (HEX) details comes up, add the keys and remember to SAVE, EXIT, then SAVE again, this will bring you back to your channel.
It will still say (Encrypted Program) at this point (power off the receiver with the remote) wait a few seconds (power on again) the channel WILL CLEAR WITH SOUND. / Do this to each channel when you add them.
Carry out the ABOVE against each HD CHANNEL.
When you CHANGE CHANNEL, you will get (Encrypted Program) to decode the channel you will have to (power off the receiver with remote)
wait a few seconds (power on again) the channel WILL CLEAR.
I HOPE THIS WORK ROUND HELPS OTHERS
I will have a go later, to see if I can get the SD channels to work.
Den
Using BBC ONE HD.
(1)v_pid= 6601 / (2)a_pid= 6602 / (3)a_type 1= AAC / (4)a_pid 2= 1 / (5)a_type 2= AAC / (6) p_pid = 6601 (7)tv flag= 1 / (8)is_scramble= 1
(9)sid = 17540 / (10)ecm= 1.
I found a BISS channel on 3E with similar specs, using the (loop - through) of another receiver I scanned in that transponder to my V8 NOVA ORANGE,
using the db editor I amended the info as above.
Then went to the keys section to add a line in the BISS KEYS, against the said channel, when you add a line ( transponder details are shown)
SERVID (HEX) details comes up, add the keys and remember to SAVE, EXIT, then SAVE again, this will bring you back to your channel.
It will still say (Encrypted Program) at this point (power off the receiver with the remote) wait a few seconds (power on again) the channel WILL CLEAR WITH SOUND. / Do this to each channel when you add them.
Carry out the ABOVE against each HD CHANNEL.
When you CHANGE CHANNEL, you will get (Encrypted Program) to decode the channel you will have to (power off the receiver with remote)
wait a few seconds (power on again) the channel WILL CLEAR.
I HOPE THIS WORK ROUND HELPS OTHERS
I will have a go later, to see if I can get the SD channels to work.
Den
Last edited by STRETCH on Sat Feb 15, 2020 10:37 am, edited 2 times in total.
Re: V7S and Intelsat 907
Does the Vpid , apid etc info change after you power off on?
I have found in the past that when making changes to Apids etc you need to use a SID that is not an active SID otherwise the channel data will auto update and remove your changes.
This may not happen with these hidden channels as the data set is not sent, that being the hidden part.
Owen
I have found in the past that when making changes to Apids etc you need to use a SID that is not an active SID otherwise the channel data will auto update and remove your changes.
This may not happen with these hidden channels as the data set is not sent, that being the hidden part.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: V7S and Intelsat 907
Have down loaded the system details again, a few hours after the receiver has been operating (after been off/on quite a few times).
There have been a few changes a_pid2 now = 0 / and the a_type2 now = PCM.
Will try this out on a V7S tomorrow (4 Feb ), will let you know how I get on.
Den
There have been a few changes a_pid2 now = 0 / and the a_type2 now = PCM.
Will try this out on a V7S tomorrow (4 Feb ), will let you know how I get on.
Den
Last edited by STRETCH on Tue Feb 04, 2020 1:58 pm, edited 1 time in total.
Re: V7S and Intelsat 907
Have been trying to get this to work on the V7s and V7Plus models that I have also got.
Carried out the same procedure as I did with my V8 NOVA ORANGE but have NOT been able to get it to work with these two receivers.
I hope this helps others.
Den
Carried out the same procedure as I did with my V8 NOVA ORANGE but have NOT been able to get it to work with these two receivers.
I hope this helps others.
Den
Re: V7S and Intelsat 907
Comments welcome.
Den
Den