Page 1 of 1
GTMedia V7S november update problem
Posted: Wed Feb 12, 2020 5:26 pm
by cvnosat
Hi, I have a lot of clients with V7S and I what I found is when it freezes nothing work, the channel dont come back and the remote wont work too, to get it work again I have to unplug and plug again to the power outlet. What I see is that the november update have bugs. Please check it! Thank you
Re: GTMedia V7S november update problem
Posted: Wed Feb 12, 2020 5:29 pm
by cpr43
cvnosat wrote: ↑Wed Feb 12, 2020 5:26 pm
Hi, I have a lot of clients with V7S and I what I found is when it freezes nothing work, the channel dont come back and the remote wont work too, to get it work again I have to unplug and plug again to the power outlet. What I see is that the november update have bugs. Please check it! Thank you
Hello and Welcome
You can always rollback to a more stable version
Re: GTMedia V7S november update problem
Posted: Wed Feb 12, 2020 7:21 pm
by Dusty
Hi. I too am having freezing issues.. only on sat 127w. I get reels, and NASA ok . But any others freeze, I must reboot. And if I don't change the channel fast. It freezes again.
This is only on sat 127w.
Re: GTMedia V7S november update problem
Posted: Wed Feb 12, 2020 7:27 pm
by Feralkiwi
This could be a signal strength issue.
I find that HD channels that have a weak signal use a lot of memory trying to correct data errors and this crashes the unit.
Owen
Re: GTMedia V7S november update problem
Posted: Wed Feb 12, 2020 11:45 pm
by Dusty
Ok.. thank you.
Though some HDs come in fine.
I once could receive the AXS channel.. I like that, FTA too. It shows FTA still but freezes the receiver . I'm lost . It seems to have a strong signal
Re: GTMedia V7S november update problem
Posted: Sat Feb 15, 2020 12:44 am
by cpr43
Re: GTMedia V7S november update problem
Posted: Sat Feb 15, 2020 1:57 am
by cvnosat
Thanks. I will test tomorrow
Re: GTMedia V7S november update problem
Posted: Tue Feb 18, 2020 12:22 pm
by Lining
cvnosat wrote: ↑Wed Feb 12, 2020 5:26 pm
Hi, I have a lot of clients with V7S and I what I found is when it freezes nothing work, the channel dont come back and the remote wont work too, to get it work again I have to unplug and plug again to the power outlet. What I see is that the november update have bugs. Please check it! Thank you
Hello, please update the latest firmware GTMedia_V7S_20200214