problem when pressing SAT button v7pro

[zamizal]

Another thing you need to fix is ​​when pressing the SAT button on the remote control,
for example when pressing SAT and pressing OK it is still back on the SAT menu again and again

[Tom.w]

Another thing you need to fix is ​​when pressing the SAT button on the remote control,
for example when pressing SAT and pressing OK it is still back on the SAT menu again and again

Next release firmware，we will fix this issue.
Thank you.

[kladovchk]

When you click the "SAT" button, the satellite on which the channels were viewed (Astra 4A) was highlighted, and not the first one, for example: Thor 5/6/7.You can make the list of satellites in the "Satellite" list arranged according to degrees.

[STRETCH]

The satellite list that you have displayed could have been the one, you would have made when scanning in each satellite.
So when you press the (SAT) button on the remote, it will go to the sat at the top of the list. until you use the remote to go to the satellite that you require.
As you say it would be better to have the satellites in order, even after scanning in the ones that you require, and also to go to the satellite, of the channel that you are watching, like other receivers, I could name.

Den

[Feralkiwi]

The sat list you showed is in the order you first scanned each satellite, not the order they are on the satellite list in menu.

As you set up the unit, scan the sats in the order you want them to appear on that list.

Owen