V7PRO Bug Channel search - epg - smart card

[Monelli]

Some BUGS, GTMedia_V7PRO firmware(23/12/2020) and (26/01/2021) in ITALY.

Code: Select all

Video 1: 
https://drive.google.com/file/d/1Yfo-fGFiUzV4qizMbaSdMkOsnUTq9axO/view?usp=sharing
Video 2:
https://drive.google.com/file/d/1zi436YStYwDi5lI99pLhg5rjzIoXfrkJ/view?usp=sharing
Image 1:
https://drive.google.com/file/d/1p1_iAGm0uok9Hj1QhXR-AxYmnrdx8lG0/view?usp=sharing
Complete backup:
https://drive.google.com/file/d/1Yf6Brd5Q5ofOL7Ov0bLL-KiFGdOD7cm5/view?usp=sharing

BUG 1 - See Video 1
Search dvb-s tivusat channel, with ITALY LCN SEARCH, work fine, many time, and channel are ordered. (Channel 1129 work!!!)
Next search dvb-t channel. Dvb-t channel are ordered but on dvb-s some channels disappear. (Channel 1129 for example!!!)
Next if i search another time dvb-s tivusat channel, with ITALY LCN SEARCH, the channel are NOT IN ORDER, the solution is reset to factory...

BUG 2 - See Video 2
EPG At power up work only if i press MENU and EXIT.

BUG 3 - Random See Video 2 at 2:40
Smart cars is read but Channel crypted. I have to turn off and on and change channels. It happens almost every time that the decoder has been turned off for a long time.

BUG 4 . See Image 1
Undefined content

[Monelli]

I confirm all the BUGs also with the firmware: 29/01/2021 V256

[Raffaele]

Same here, we asked for a fix some time ago.......no response....

[artic5]

Same problems also for me (V7 Pro).
I'm using latest firmware (29/01/2021).

[Feralkiwi]

Re channel 1129.

If you press the middle button, "OK", the channel list comes up.
You can move down that 10 at a time by pressing left or right.

Yes it is a known fault at present that the LNC function after a terrestrial search makes a mess of the channel numbers in satellite lists.

Re bug 3: others have reported that some cards are thin and they add extra thickness to the card to make it press the "card in" switch.

Bug 4:
I also get this with my V7Pro.
The EPG data is tagged using the channel SID (service identification) and I see EPG data from another channel with the same SID.

I hope they fix these issues.

Owen

[Monelli]

Re bug 3: others have reported that some cards are thin and they add extra thickness to the card to make it press the "card in" switch.

Owen

BUG 3
I'm not sure it's the same problem.
I explain to you.
If I leave the decoder on all the time, the problem is not there.
Currently I never turn off the decoder. So it works well.
In addition, card in and code is displayed, see video.
I'll try with the thickness.

I await the correction of the other bugs. THANK YOU!

[Tom.w]

hello

The conflict between satellite program lcn number and dvb-t/t2 program lcn number causes problems.
we will fix it asap

[Raffaele]

hello

The conflict between satellite program lcn number and dvb-t/t2 program lcn number causes problems.
we will fix it asap

Please fix the other bugs too

[AlexItaly]

Please fix the other bugs too

I quote Raffaele, especially that annoying bug of EPG requiring to press MENU and then EXIT every time...
Thanks

[Feralkiwi]

I also note that the EPG will show the text from another channel that has the same SID even though it is a different TP and satellite.
It then does not update for the correct EPG data.
Optus D1@160e 12483 H 22500 / SID=1025; Maori TV
Intelsat19@166e 12570 V 26810 / SID=1025; Channel Nine Brisbane
I see the EPG for Maori TV when I go to Channel Nine Brisbane.


EPG stored in memory is displayed based on SID only.

Owen

[Monelli]

BUG 1 - Firmware 258 NOT SOLVED
I search dvb-s lcn Italy and ok
Next I search dvb-t Italy lcn and ok
Next I search an other time, for update, dvb-s lcn Italy and WRONG ORDER.

BUG 2 - Firmware 258 SOLVED!!!

BUG 3 - SOLVED with extra thickness

BUG 4 - Firmware 258 NOT SOLVED

Some BUGS, GTMedia_V7PRO firmware(23/12/2020) and (26/01/2021) in ITALY.

BUG 1 - See Video 1
Search dvb-s tivusat channel, with ITALY LCN SEARCH, work fine, many time, and channel are ordered. (Channel 1129 work!!!)
Next search dvb-t channel. Dvb-t channel are ordered but on dvb-s some channels disappear. (Channel 1129 for example!!!)
Next if i search another time dvb-s tivusat channel, with ITALY LCN SEARCH, the channel are NOT IN ORDER, the solution is reset to factory...

BUG 2 - See Video 2
EPG At power up work only if i press MENU and EXIT.

BUG 3 - Random See Video 2 at 2:40
Smart cars is read but Channel crypted. I have to turn off and on and change channels. It happens almost every time that the decoder has been turned off for a long time.

BUG 4 . See Image 1
Undefined content

[Raffaele]

BUG 2 - Firmware 258 SOLVED!!!

Finally!! It was really annoying...

Can't wait for thr resolution of the others bugs!

[Tom.w]

hello

thank you very much
we will fix them continue.

[Monelli]

Firmware update 262

BUG 1 - The behavior got worse.

I try to explain.
If I only use dvb-s (satellite) and do italy lcn scan everything works fine (tivusat).
If I only use dvb-t (terrestrial) and I scan by activating lcn everything works fine.

If I want to create two lists (satellite and terrestrial) ordered lcn, and use the key on the remote control SAT, to switch from one list to another does not work. The lists are disordered.

Firmware example 262. I perform the following steps:
- Factory reset
- dvb-s (satellite) italy lcn scan (ok ordered channel!)
- dvb-t (terrestrial) scan with lcn ON. (Now dvb-s (satellite) list changes and becomes disorderly!!!!)

(with the previous firmware by performing the steps in this order the two lists were sorted correctly. To update a list you had to do a factory reset. With the latest firmware, it no longer works like this)

Please fix!!!
I would like two lists (satellite and terrestrial) ordered lcn!

BUG 4 - NOT SOLVED

[Tom.w]

Firmware update 262

BUG 1 - The behavior got worse.

I try to explain.
If I only use dvb-s (satellite) and do italy lcn scan everything works fine (tivusat).
If I only use dvb-t (terrestrial) and I scan by activating lcn everything works fine.

If I want to create two lists (satellite and terrestrial) ordered lcn, and use the key on the remote control SAT, to switch from one list to another does not work. The lists are disordered.

Firmware example 262. I perform the following steps:
- Factory reset
- dvb-s (satellite) italy lcn scan (ok ordered channel!)
- dvb-t (terrestrial) scan with lcn ON. (Now dvb-s (satellite) list changes and becomes disorderly!!!!)

(with the previous firmware by performing the steps in this order the two lists were sorted correctly. To update a list you had to do a factory reset. With the latest firmware, it no longer works like this)

Please fix!!!
I would like two lists (satellite and terrestrial) ordered lcn!

BUG 4 - NOT SOLVED

hello
can you backup the firmware with the disorderly database,then send it to me.
i will check it

Best Regards

[Monelli]

hello
can you backup the firmware with the disorderly database,then send it to me.
i will check it

Best Regards

TEST 1 (Firmware backup step by step)

-Factory Reset

-SAT Italy LCN Scan ---> Order OK
https://drive.google.com/file/d/11AgOjR ... sp=sharing

-Terrestrial scan with LCN ---> OK two ordered list sat and terrestrial
https://drive.google.com/file/d/1wrufOr ... sp=sharing

-SAT Italy LCN scan (for example update channel list) ---> WRONG ORDER
https://drive.google.com/file/d/1p0ZQ1a ... sp=sharing

TEST 2 (Firmware backup step by step)

-Factory Reset

-Terrestrial scan with LCN ---> OK
https://drive.google.com/file/d/16v31Uy ... sp=sharing

-SAT Italy LCN scan ---> WRONG ORDER
https://drive.google.com/file/d/1HK7hq5 ... sp=sharing

[Tom.w]

hello
can you backup the firmware with the disorderly database,then send it to me.
i will check it

Best Regards

TEST 1 (Firmware backup step by step)

-Factory Reset

-SAT Italy LCN Scan ---> Order OK
https://drive.google.com/file/d/11AgOjR ... sp=sharing

-Terrestrial scan with LCN ---> OK two ordered list sat and terrestrial
https://drive.google.com/file/d/1wrufOr ... sp=sharing

-SAT Italy LCN scan (for example update channel list) ---> WRONG ORDER
https://drive.google.com/file/d/1p0ZQ1a ... sp=sharing

TEST 2 (Firmware backup step by step)

-Factory Reset

-Terrestrial scan with LCN ---> OK
https://drive.google.com/file/d/16v31Uy ... sp=sharing

-SAT Italy LCN scan ---> WRONG ORDER
https://drive.google.com/file/d/1HK7hq5 ... sp=sharing

Thank you very much for your feedback.
we will check and fix it ASAP