Hello everyone !
Can I load db list from V7Pro to V7S2X ?
Can I load db list from V7 Pro to V7S2X
Moderators: admin, GTMedia Team
Re: Can I load db list from V7 Pro to V7S2X
Thanks for your answer but I think it is not the same situation
My devices are both new generations. In your link diskussion is about for an one very old model device and one newer
My devices are both new generations. In your link diskussion is about for an one very old model device and one newer
Re: Can I load db list from V7 Pro to V7S2X
You may be able to load your channel list from your (V7PRO) to (V7S2X) BUT it will be at your own RISK.
Just down load the (channel list) no system data, were it says (V7PRO) put in (V7S2X). Before you start make sure you have down loaded the channel list from your (V7S2X), also have to hand the latest software for each of the receivers, if things go wrong.
It is always best to make a channel list for each receiver, then keep a back-up on USB.
This is at your own risk.
Den
Just down load the (channel list) no system data, were it says (V7PRO) put in (V7S2X). Before you start make sure you have down loaded the channel list from your (V7S2X), also have to hand the latest software for each of the receivers, if things go wrong.
It is always best to make a channel list for each receiver, then keep a back-up on USB.
This is at your own risk.
Den
Re: Can I load db list from V7 Pro to V7S2X
My V8UHD was never able to load / import the cccam file from flashdisk even though I had upgraded the SW V226 and I changed the name of the file extension to CCCam.cfg. & still appears "IMPORT FILE FAILED".
Please advice.
Thank's
Please advice.
Thank's
Re: Can I load db list from V7 Pro to V7S2X
hello
what filesystem is the flashdisk? fat32 or ntfs?
do you put the cccam.cfg file into the root folder?
and please check the content of the cccam.cfg file following the user guide from viewtopic.php?f=67&t=12407
(GTMEDIA_V8UHD_CCCam Newcam Mgcam Operation Guide2021.01.11.zip)
Re: Can I load db list from V7 Pro to V7S2X
Hello Bro,
- My filesystem at FD is fat.32
- I put the cccam.cfg file in the main folder the same as the V226 sw file, the V226 file upgrade was successful on the FD, only cccam.cfg which failed continuously.
- refer to following instruction guide below how do I write the cccam format on the list for example : C:192.168.1.11_10000_7110_7110 or C_:_ 192.168.1.11_10000_7110_7110?
- My filesystem at FD is fat.32
- I put the cccam.cfg file in the main folder the same as the V226 sw file, the V226 file upgrade was successful on the FD, only cccam.cfg which failed continuously.
- refer to following instruction guide below how do I write the cccam format on the list for example : C:192.168.1.11_10000_7110_7110 or C_:_ 192.168.1.11_10000_7110_7110?