RECOVERY v7 tt
Moderators: admin, GTMedia Team
-
- Posts: 2
- Joined: Fri Apr 30, 2021 10:46 pm
RECOVERY v7 tt
hello, I am a new user of this system and I bought this v7 tt receiver, it came stuck on this screen I would like to know where I can get the flash.bin file, I will be very grateful if someone can help me
- Attachments
-
- v7 tt travado.jpeg (67.44 KiB) Viewed 558 times
-
- Posts: 548
- Joined: Thu Nov 29, 2018 12:50 am
Re: RECOVERY v7 tt
There are two updates for your V7 TT located here - viewtopic.php?f=39&t=19757
I would download both and save them to a file in your pc if you don't already have them.
I would use the latest firmware update file v266 and use an unzipper like 7zip to unzip it and put it onto a freshly formatted USB drive and rename the file ( flash ) so it should be .bin type file named - flash - when done and insert it into a USB slot on the V7 TT, then shut off and reboot the receiver and during reboot repeatedly press the remotes menu button and you should see it start to load onto the receiver. Let it run until it re-starts on its own and runs ok.
Good Luck!
I would download both and save them to a file in your pc if you don't already have them.
I would use the latest firmware update file v266 and use an unzipper like 7zip to unzip it and put it onto a freshly formatted USB drive and rename the file ( flash ) so it should be .bin type file named - flash - when done and insert it into a USB slot on the V7 TT, then shut off and reboot the receiver and during reboot repeatedly press the remotes menu button and you should see it start to load onto the receiver. Let it run until it re-starts on its own and runs ok.
Good Luck!
-
- Posts: 2
- Joined: Fri Apr 30, 2021 10:46 pm
Re: RECOVERY v7 tt
hello, thank you very much for the information, but I managed to get to this result that you posted I did the same process that I read in another topic on the internet and the result was good I unlocked the device thank you very much