- IMG20210720204151_00.jpg (1.9 MiB) Viewed 3111 times
Ca card
Moderators: admin, GTMedia Team
-
- Posts: 12
- Joined: Fri Jan 29, 2021 6:23 am
Ca card
I have a broadcast card, but the broadcast is still scrambled, how do I do it? Maybe there is a tutorial
- Attachments
-
- IMG20210720204750_00.jpg (3.04 MiB) Viewed 3111 times
Re: Ca card
Let us know what satellite / channels, then they will be able to let you know if the card is supported, also what receiver you have.
Den
Den
-
- Posts: 12
- Joined: Fri Jan 29, 2021 6:23 am
Re: Ca card
Telkom Satellite 108°, Tp 3860 v 31000
Re: Ca card
Sorry, not all cards are supported.
-
- Posts: 12
- Joined: Thu Aug 05, 2021 10:59 am
Ca card
Hello to everybody!I have the V7 Pro with the last firmware of June and i'd like to know if also it works with Skylink card just as the V8 :
With my V7 pro doesn't workalex.c wrote: ↑Fri Jun 12, 2020 6:51 amSmartcard supported by V8 series
------------------------------------------------------------------------------
Support:
Nagra CAID 183E for 13E Italy Tivusat(the gold one) . Thanks Peugeot 207
Nagra CAID 183D for 13E Italy Tivusat(old card). Thanks avalanche
Nagra CAID 1805 for 13E Italy Mediaset Premium. Thanks luciano
Viacess CAID 0500 for 13E Switzerland SRG/SSR. Thanks dishwasher
Conax CAID 0B00 for 85.2E Russia Telekarta. Thanks vvv476
Conax CAID 0B01 for 13E Poland Telewizja na kartę. Thanks Sławek
Seca CAID 0100 for 13E Poland CYFRA+. Thanks Sławek
Viacess CAID 0500 for 16E Croatia OIV. Thanks Peugeot 207
Viacess CAID 0500 for 5W Fransat. Thanks Belou-43
CryptoWorks CAID 0D98 for 19.2E Austria ORF ICE. Thanks PCBtea
Seca CAID 0100 for 19.2E Spain Movistar. Thanks CAJE
Seca CAID 0100 for 19.2E/23.5E The Netherlands Canal Digitaal. Thanks bobkent44
CryptoWorks CAID 0D96 for 23.5E Slovakia SkyLink ICE. Thanks rarachch
NDS CAID 09AC for 91.5E Malaysia Astro. Thanks zamizal
Irdeto CAID 0602 for (unknown) Telekarta TV. Thanks kladovchk
Conax CAID 0B00 for Cable Turkey TV. Thanks Dakoda
Conax CAID 0B00 for Cable Bulgaria Blizoo BG. Thanks coolpazo
------------------------------------------------------------------------------
Re: Ca card
Please check if you card was recognized or not, you can check the card information.wvalentino wrote: ↑Thu Aug 05, 2021 11:42 amHello to everybody!I have the V7 Pro with the last firmware of June and i'd like to know if also it works with Skylink card just as the V8 :With my V7 pro doesn't workalex.c wrote: ↑Fri Jun 12, 2020 6:51 amSmartcard supported by V8 series
------------------------------------------------------------------------------
Support:
Nagra CAID 183E for 13E Italy Tivusat(the gold one) . Thanks Peugeot 207
Nagra CAID 183D for 13E Italy Tivusat(old card). Thanks avalanche
Nagra CAID 1805 for 13E Italy Mediaset Premium. Thanks luciano
Viacess CAID 0500 for 13E Switzerland SRG/SSR. Thanks dishwasher
Conax CAID 0B00 for 85.2E Russia Telekarta. Thanks vvv476
Conax CAID 0B01 for 13E Poland Telewizja na kartę. Thanks Sławek
Seca CAID 0100 for 13E Poland CYFRA+. Thanks Sławek
Viacess CAID 0500 for 16E Croatia OIV. Thanks Peugeot 207
Viacess CAID 0500 for 5W Fransat. Thanks Belou-43
CryptoWorks CAID 0D98 for 19.2E Austria ORF ICE. Thanks PCBtea
Seca CAID 0100 for 19.2E Spain Movistar. Thanks CAJE
Seca CAID 0100 for 19.2E/23.5E The Netherlands Canal Digitaal. Thanks bobkent44
CryptoWorks CAID 0D96 for 23.5E Slovakia SkyLink ICE. Thanks rarachch
NDS CAID 09AC for 91.5E Malaysia Astro. Thanks zamizal
Irdeto CAID 0602 for (unknown) Telekarta TV. Thanks kladovchk
Conax CAID 0B00 for Cable Turkey TV. Thanks Dakoda
Conax CAID 0B00 for Cable Bulgaria Blizoo BG. Thanks coolpazo
------------------------------------------------------------------------------
-
- Posts: 12
- Joined: Thu Aug 05, 2021 10:59 am
Re: Ca card
It is recognized because it reads the atr number but not else and the channels are scrambled.
Re: Ca card
Is your card a SkyLink ICE card?wvalentino wrote: ↑Fri Aug 06, 2021 1:21 pmIt is recognized because it reads the atr number but not else and the channels are scrambled.
Only SkyLink ICE card was tested.
-
- Posts: 12
- Joined: Thu Aug 05, 2021 10:59 am
Re: Ca card
Yes it is just Skylink ICE card but it doesn't work.The same card works perfectly in all other decoders i have even if they are not Linux based and don"t insert in c.i. module. Any suggest for me?Should i try boxkey and rsakey?If yes, could you please tell me how to do ?
Re: Ca card
Please take a picture of the CA information menu.wvalentino wrote: ↑Mon Aug 09, 2021 1:00 pmYes it is just Skylink ICE card but it doesn't work.The same card works perfectly in all other decoders i have even if they are not Linux based and don"t insert in c.i. module. Any suggest for me?Should i try boxkey and rsakey?If yes, could you please tell me how to do ?
I need to see the ATR number of your card, thanks.
-
- Posts: 12
- Joined: Thu Aug 05, 2021 10:59 am
Re: Ca card
It is this
- Attachments
-
- ATR skylink standard ICE
- IMG-20210810-WA0001.jpg (59.72 KiB) Viewed 2826 times
Re: Ca card
Got it.
I will send you a testing firmware.
Please check if it works.
Thanks.
-
- Posts: 12
- Joined: Thu Aug 05, 2021 10:59 am
Re: Ca card
YOU ARE GREAT and you make great this brand.The fw you send me works very well. THANK YOU A LOT!
Re: Ca card
Welcome, friend.wvalentino wrote: ↑Wed Aug 11, 2021 10:39 amYOU ARE GREAT and you make great this brand.The fw you send me works very well. THANK YOU A LOT!
You can also get this in next release.
-
- Posts: 10
- Joined: Mon Aug 16, 2021 10:54 am
Re: Ca card
Re: Ca card
Please tell me your problem, what's wrong with your card?Dwi widodo wrote: ↑Tue Aug 17, 2021 5:48 amcan you send me the firmware too, so I can use my CA card, Belongs to MNC Vision Indonesia
-
- Posts: 10
- Joined: Mon Aug 16, 2021 10:54 am
Re: Ca card
My card works fine when used in MNC vision's built-in decoder, but when I move the CA card to my GTmedia V7 pro decoder, the display doesn't open but gets scrambled.
Re: Ca card
Please take a picture of the CA information menu.Dwi widodo wrote: ↑Tue Aug 17, 2021 5:57 amMy card works fine when used in MNC vision's built-in decoder, but when I move the CA card to my GTmedia V7 pro decoder, the display doesn't open but gets scrambled.
I need to see the ATR number of your card, thanks.
-
- Posts: 10
- Joined: Mon Aug 16, 2021 10:54 am
Re: Ca card
alex.c wrote: ↑Tue Aug 17, 2021 6:44 amPlease take a picture of the CA information menu.Dwi widodo wrote: ↑Tue Aug 17, 2021 5:57 amMy card works fine when used in MNC vision's built-in decoder, but when I move the CA card to my GTmedia V7 pro decoder, the display doesn't open but gets scrambled.
I need to see the ATR number of your card, thanks.
-
- Posts: 10
- Joined: Mon Aug 16, 2021 10:54 am
Re: Ca card
ATR:3F7F13250333B01169FF4A505000004956010000alex.c wrote: ↑Tue Aug 17, 2021 6:44 amPlease take a picture of the CA information menu.Dwi widodo wrote: ↑Tue Aug 17, 2021 5:57 amMy card works fine when used in MNC vision's built-in decoder, but when I move the CA card to my GTmedia V7 pro decoder, the display doesn't open but gets scrambled.
I need to see the ATR number of your card, thanks.
-
- Posts: 10
- Joined: Mon Aug 16, 2021 10:54 am
Re: Ca card
Dwi widodo wrote: ↑Tue Aug 17, 2021 11:08 amATR:3F7F13250333B01169FF4A505000004956010000alex.c wrote: ↑Tue Aug 17, 2021 6:44 amPlease take a picture of the CA information menu.Dwi widodo wrote: ↑Tue Aug 17, 2021 5:57 amMy card works fine when used in MNC vision's built-in decoder, but when I move the CA card to my GTmedia V7 pro decoder, the display doesn't open but gets scrambled.
I need to see the ATR number of your card, thanks.
- Attachments
-
- Screenshot_20210817-181444_Gallery.jpg (267.62 KiB) Viewed 2619 times
Re: Ca card
Hi, friend,Dwi widodo wrote: ↑Tue Aug 17, 2021 11:16 amDwi widodo wrote: ↑Tue Aug 17, 2021 11:08 amATR:3F7F13250333B01169FF4A505000004956010000alex.c wrote: ↑Tue Aug 17, 2021 6:44 amPlease take a picture of the CA information menu.Dwi widodo wrote: ↑Tue Aug 17, 2021 5:57 amMy card works fine when used in MNC vision's built-in decoder, but when I move the CA card to my GTmedia V7 pro decoder, the display doesn't open but gets scrambled.
I need to see the ATR number of your card, thanks.
The Card information is correct.
Does this card work?
Can you see the encrypted channel?
-
- Posts: 10
- Joined: Mon Aug 16, 2021 10:54 am
Re: Ca card
The card works when plugged into the built-in decoder, but when plugged into GTmedia V7Pro I can't see the channel. encrypt programalex.c wrote: ↑Wed Aug 18, 2021 3:14 amHi, friend,Dwi widodo wrote: ↑Tue Aug 17, 2021 11:16 amDwi widodo wrote: ↑Tue Aug 17, 2021 11:08 amATR:3F7F13250333B01169FF4A505000004956010000alex.c wrote: ↑Tue Aug 17, 2021 6:44 amPlease take a picture of the CA information menu.Dwi widodo wrote: ↑Tue Aug 17, 2021 5:57 amMy card works fine when used in MNC vision's built-in decoder, but when I move the CA card to my GTmedia V7 pro decoder, the display doesn't open but gets scrambled.
I need to see the ATR number of your card, thanks.
The Card information is correct.
Does this card work?
Can you see the encrypted channel?
- Attachments
-
- Encrypt program, even though this is a paid channel
- Screenshot_20210818-185616_Gallery.jpg (89.07 KiB) Viewed 2558 times
Re: Ca card
Hello,
I have a Irdeto Card that works in others receivers but not in GT X8 Combo.
After insert the card, X8 recognize the card but don't open the signal
I got the follow msg at Conditional Access menu:
Is there a firmware for solve it?
I have a Irdeto Card that works in others receivers but not in GT X8 Combo.
After insert the card, X8 recognize the card but don't open the signal
I got the follow msg at Conditional Access menu:
Is there a firmware for solve it?
- Attachments
-
- WhatsApp Image 2021-11-11 at 22.27.01.jpeg (90.74 KiB) Viewed 2235 times
-
- Posts: 12
- Joined: Thu Aug 05, 2021 10:59 am
Re: Ca card
I write here because I need again your help.The Skylink card is always the same which I already posted upstairs,but the new channel is scrambled.In the 2nd decoder it is visible using the card with the cam c.i.Is it possible to do something?
- Attachments
-
- Scrambled
- IMG_20220123_100442.jpg (1.41 MiB) Viewed 1905 times