v7s hd
Moderators: admin, GTMedia Team
v7s hd
buongiorno a tutto il forum , ho un problema insolito, quando cambio canale , non cambia singolaemente , ma i canali scorrono velocemente senza fermarsi , ho aggiornato il firmware , ma non è cambiato nulla.Però ho notato che , se avvicino il telecomando vicino al decoder funziona tutto regolarmente , quando lo allontano si presenta nuovamente il problema.
Re: v7s hd
Change batteries and clean all your remote control around. Maybe one of the botons can be stuck.lele_b wrote: ↑Sun Jul 24, 2022 10:03 ambuongiorno a tutto il forum , ho un problema insolito, quando cambio canale , non cambia singolaemente , ma i canali scorrono velocemente senza fermarsi , ho aggiornato il firmware , ma non è cambiato nulla.Però ho notato che , se avvicino il telecomando vicino al decoder funziona tutto regolarmente , quando lo allontano si presenta nuovamente il problema.
Re: v7s hd
Fatto ma fa sempre lo stesso problema
Re: v7s hd
Look at the IR LED on the remote control through a digital camera.
You will be able to see it flashing, so if a button is stuck it will keep flashing.
You may have dirt or water inside the remote.
You can open it by pressing your two thumb nails into the cracks along the sides.
Check that the board / button contacts are clean.
I had this issue after my cat dribbled on the remote.
Owen
You will be able to see it flashing, so if a button is stuck it will keep flashing.
You may have dirt or water inside the remote.
You can open it by pressing your two thumb nails into the cracks along the sides.
Check that the board / button contacts are clean.
I had this issue after my cat dribbled on the remote.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.