help me with gtmedia v7 plus
Moderators: admin, GTMedia Team
help me with gtmedia v7 plus
I have gtmedia v7 plus used for 1 year , now when power on the device -- the screen says "usb update , do not power off " . then the machine can't go to the main screen. if you want to boot successfully when turning on the power must press the hard button prev + always . i am using the latest firmware 4/27-2021 . can anyone help me to fix this error ?
Re: help me with gtmedia v7 plus
Hellomtvcomvn wrote: ↑Tue Nov 15, 2022 6:20 amI have gtmedia v7 plus used for 1 year , now when power on the device -- the screen says "usb update , do not power off " . then the machine can't go to the main screen. if you want to boot successfully when turning on the power must press the hard button prev + always . i am using the latest firmware 4/27-2021 . can anyone help me to fix this error ?
You need to do a force USB recovery process:
Read here for your model
viewtopic.php?f=67&t=14431
Latest File here:
viewtopic.php?f=39&t=10381
Re: help me with gtmedia v7 plus
Power on, the machine automatically enters UP9 mode even though it has successfully flashed the flash.bin file, tried several software versions from old to new of v7plus
Re: help me with gtmedia v7 plus
In the UP9 screen do you see your serial number or has it been replaced with xxxxxx?
There is this topic on UP9.
Owen
.
.
.
Pic of UP9 on a V8 unit. Note the serial number with xxxxx
There is this topic on UP9.
Owen
.
.
.
Pic of UP9 on a V8 unit. Note the serial number with xxxxx
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: help me with gtmedia v7 plus
Feralkiwi wrote: ↑Sun Nov 27, 2022 10:46 pmIn the UP9 screen do you see your serial number or has it been replaced with xxxxxx?
There is this topic on UP9.
Owen
.
.
.
Pic of UP9 on a V8 unit. Note the serial number with xxxxx
up9 of v7 plus only has the words: usb upgrade .do not power off
Re: help me with gtmedia v7 plus
Have you tried a forced recovery, flash.bin and menu at start up?
Owen
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: help me with gtmedia v7 plus
You should try other firmware versions, if it takes 90 seconds it will have been restored successfully, if you don't try another version, in the end one will work for you
Re: help me with gtmedia v7 plus
It still may be the issue of the serial number being lost.
Owen
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: help me with gtmedia v7 plus
It must be USB on the RS232 Jack port
Re: help me with gtmedia v7 plus
When F UPg appears it is because you have pressed the Power key too many times, you must disconnect from the power supply
Re: help me with gtmedia v7 plus
i didn't press any key . when I got F UP9 error I unplugged the power for 30 minutes then plugged it back in , didn't press any key , stb still automatically shows BOOT <---> FUP9 continuously . can't boot successfully
Re: help me with gtmedia v7 plus
With a firmware renamed to flash.bin it will work again
Sometimes you have to try four different firmwares
If the process takes 90 seconds, it has been fixed
Sometimes you have to try four different firmwares
If the process takes 90 seconds, it has been fixed
Re: help me with gtmedia v7 plus
tried 6 different firmwares. Turn on the power and see it normally. the error here is that it goes into temporary off mode for 15 minutes and turns it back on --> stb automatically enters F UP9
Re: help me with gtmedia v7 plus
Check the temperature of the WiFi antenna if it turns off after 15 minutes
Re: help me with gtmedia v7 plus
This may need recovery software from GT Media for the "No serial number UP9" issue.
I will PM Lining on this.
Owen
I will PM Lining on this.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: help me with gtmedia v7 plus
Can you confirm that your UP9 screen has no serial number, just xxxxxx?
Owen
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: help me with gtmedia v7 plus
That is the USB software load screen.
The UP9 is like this.
Owen
The UP9 is like this.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.