help me with gtmedia v7 plus

[mtvcomvn]

That is the USB software load screen.
The UP9 is like this.

Owen

then I can't get into UP9. I press the menu when I start up a lot and it just shows up

https://i.imgur.com/Pkvxykw.jpg

[Lining]

That is the USB software load screen.
The UP9 is like this.

Owen

then I can't get into UP9. I press the menu when I start up a lot and it just shows up

https://i.imgur.com/Pkvxykw.jpg

You can download the following software. USB forced upgrade
1. In the factory interface, check the ID information according to the information and send me to me
1. In the factory interface, press the number key blue+yellow+8+0 to enter the upgrade interface, upgrade the software
https://www.freesat.cn/form/viewtopic.php?f=40&t=18373

[mtvcomvn]

That is the USB software load screen.
The UP9 is like this.

Owen

then I can't get into UP9. I press the menu when I start up a lot and it just shows up

https://i.imgur.com/Pkvxykw.jpg

Just turn on the power and it will show F UP9. Press the menu and it will show the SNXXX series, but you just tell me to confirm the error series.
https://photos.google.com/share/AF1QipO ... BwX3FVaFR3

[mtvcomvn]

That is the USB software load screen.
The UP9 is like this.

Owen

then I can't get into UP9. I press the menu when I start up a lot and it just shows up

https://i.imgur.com/Pkvxykw.jpg

Just turn on the power and it will show F UP9. Press the menu and it will show the SNXXX series, but you just tell me to confirm the error series.
https://photos.google.com/share/AF1QipO ... BwX3FVaFR3

https://photos.app.goo.gl/XLrdDSXgTGk5QrVC7
Power on -->> auto FUP9

[CAJE]

That is the USB software load screen.
The UP9 is like this.

Owen

then I can't get into UP9. I press the menu when I start up a lot and it just shows up

https://i.imgur.com/Pkvxykw.jpg

Just turn on the power and it will show F UP9. Press the menu and it will show the SNXXX series, but you just tell me to confirm the error series.
https://photos.google.com/share/AF1QipO ... BwX3FVaFR3

https://photos.app.goo.gl/XLrdDSXgTGk5QrVC7
Power on -->> auto FUP9

You must put a firmware in USB flash.bin or update.bin for Mars when F-UPG upgrade comes out

[mtvcomvn]

That is the USB software load screen.
The UP9 is like this.

Owen

then I can't get into UP9. I press the menu when I start up a lot and it just shows up

https://i.imgur.com/Pkvxykw.jpg

Just turn on the power and it will show F UP9. Press the menu and it will show the SNXXX series, but you just tell me to confirm the error series.
https://photos.google.com/share/AF1QipO ... BwX3FVaFR3

https://photos.app.goo.gl/XLrdDSXgTGk5QrVC7
Power on -->> auto FUP9

You must put a firmware in USB flash.bin or update.bin for Mars when F-UPG upgrade comes out

still can't fix it

[mtvcomvn]

can't boot, how to see SNXx series in this case
https://photos.app.goo.gl/9WikfoB4EPQFgstV7

[Feralkiwi]

Hi from your last video I see that the unit does not stay powered on.

Check you power supply and try another one if you have one, 12 volt 1.5 amp, or 2 amp if you have one.
Try powering on with all the other connections disconnected, like the LNB cable and the TV HDMI and AV cables.

Owen

[mtvcomvn]

Hi from your last video I see that the unit does not stay powered on.

Check you power supply and try another one if you have one, 12 volt 1.5 amp, or 2 amp if you have one.
Try powering on with all the other connections disconnected, like the LNB cable and the TV HDMI and AV cables.

Owen

please review. v7 plus led bright letter F UP9 .TV shows usb upgrade .do not power off.. can power up both devices

[CAJE]

You should try it with more firmware versions of V7 plus renamed to flash.bin, if it doesn't reboot after 90 seconds, try another firmware, like this until you can reanimate it