gtmedia v7pro rs232
Moderators: admin, GTMedia Team
-
- Posts: 222
- Joined: Wed Feb 01, 2017 4:16 am
gtmedia v7pro rs232
I am going to buy gtmedia v7pro. when checking the photos of it I did not see RS232 input for it.
does it have RS232 input?
if it does not have RS232 how can we flash the FW if some FW crash happed?
thanks
kolitha
does it have RS232 input?
if it does not have RS232 how can we flash the FW if some FW crash happed?
thanks
kolitha
Re: gtmedia v7pro rs232
The RS232 port connection is inside the unit.
RS232 recovery here.
With normal GT Media software, not Mars, you can use the USB flash.bin recovery method.
Recovery with Mars is different and uses update.bin
Mars can only return to normal GT Media software via RS232
Owen
RS232 recovery here.
With normal GT Media software, not Mars, you can use the USB flash.bin recovery method.
Recovery with Mars is different and uses update.bin
Mars can only return to normal GT Media software via RS232
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 222
- Joined: Wed Feb 01, 2017 4:16 am
Re: gtmedia v7pro rs232
Thanks Feralkiwi ,
I want a v7pro without Mars.
I wanted to know wether it is possible to change Fw to normal if bychance the seller sends a one with mars.
thank you very much
kolitha.
I want a v7pro without Mars.
I wanted to know wether it is possible to change Fw to normal if bychance the seller sends a one with mars.
thank you very much
kolitha.
Re: gtmedia v7pro rs232
У меня с Mars через rs232 не прошивается на старую прошивку Gtmedia
Re: gtmedia v7pro rs232
Обновил на свою голову прошивку Mars, а на ней не находит 3 цифровых канала из 20. И внешний жёсткий диск перестал читать.
Как откатиться на обычную нормальную прошивку? Какой провод нужен?
Как откатиться на обычную нормальную прошивку? Какой провод нужен?
Re: gtmedia v7pro rs232
An RS232 USB or DB9 to Jack cable
Re: gtmedia v7pro rs232
Hi feralkiwi,Feralkiwi wrote: ↑Tue Jan 24, 2023 5:23 amThe RS232 port connection is inside the unit.
RS232 recovery here.
With normal GT Media software, not Mars, you can use the USB flash.bin recovery method.
Recovery with Mars is different and uses update.bin
Mars can only return to normal GT Media software via RS232
Owen
but for V7pro from mars to stock the guide speak about connect a lan cable for V7pro on the same network where is the pc. But the V7pro not have rj45 port only wifi.
But will be possible have a clear tutorial for V7pro downgrade from mars firmware ??
Thanks.
Re: gtmedia v7pro rs232
linch wrote: ↑Sun Jan 29, 2023 5:16 pmHi feralkiwi,Feralkiwi wrote: ↑Tue Jan 24, 2023 5:23 amThe RS232 port connection is inside the unit.
RS232 recovery here.
With normal GT Media software, not Mars, you can use the USB flash.bin recovery method.
Recovery with Mars is different and uses update.bin
Mars can only return to normal GT Media software via RS232
Owen
but for V7pro from mars to stock the guide speak about connect a lan cable for V7pro on the same network where is the pc. But the V7pro not have rj45 port only wifi.
But will be possible have a clear tutorial for V7pro downgrade from mars firmware ??
Thanks.
- Attachments
-
- JST on V7 Pro
- JTS connection in Gtmedia Box.jpg (172.66 KiB) Viewed 866 times
Re: gtmedia v7pro rs232
Yes you would need to have wifi set up to use that method.linch wrote: ↑Sun Jan 29, 2023 5:16 pmHi feralkiwi,
but for V7pro from mars to stock the guide speak about connect a lan cable for V7pro on the same network where is the pc. But the V7pro not have rj45 port only wifi.
But will be possible have a clear tutorial for V7pro downgrade from mars firmware ??
Thanks.
You can still put the file on the USB stick and load it from there.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: gtmedia v7pro rs232
Удалось вернуться на старое по с Mars через rs232,на флешку помешаете файл с по,переименовать в flash.bin,вставляете в ресивер,подключаете шнур rs232,запускаете программу на компьютере,выбираете com port,и убирает галочку с tftp,затем ok,перегружает питание ресивера и пошла загрузка
Re: gtmedia v7pro rs232
@Feralkiwi and @Caje
Thanks for answers.
Thanks for answers.