Page 1 of 1
V7s nie uruchamia się - doesn't work.
Posted: Thu Mar 02, 2023 8:33 am
by przeeemek1
Jak w temacie. Nie uruchamia się v7s. Świeci się tylko zielona dioda.
Da radę reanimować go przez wgranie nowego softu czy raczej coś się spaliło?
v7s does not start. Only the green LED is on.
Re: V7s nie uruchamia się - doesn't work.
Posted: Thu Mar 02, 2023 9:45 am
by CAJE
The only solution is to use the RS232 cable if the upg doesn't work
Re: V7s nie uruchamia się - doesn't work.
Posted: Fri Mar 03, 2023 12:48 am
by Feralkiwi
Re: V7s nie uruchamia się - doesn't work.
Posted: Sun Mar 12, 2023 7:11 pm
by przeeemek1
Not work. USB only blink 10 times.
Re: V7s nie uruchamia się - doesn't work.
Posted: Sun Mar 12, 2023 9:48 pm
by Feralkiwi
przeeemek1 wrote: ↑Sun Mar 12, 2023 7:11 pm
Not work. USB only blink 10 times.
Remember to unpack the .zip folder and use the .bin file.
You must use the correct software for that unit.
Owen
Re: V7s nie uruchamia się - doesn't work.
Posted: Tue Mar 14, 2023 3:25 pm
by przeeemek1
I did everything according to the guide. I've tried different ways. Neither works.
Is there any other way to upload the software?
Re: V7s nie uruchamia się - doesn't work.
Posted: Tue Mar 14, 2023 3:32 pm
by CAJE
I already told you that there is only one solution, use RS232 cable
Re: V7s nie uruchamia się - doesn't work.
Posted: Wed Mar 15, 2023 7:01 am
by przeeemek1
Do you have any instructions? I understand that you have to connect directly to the motherboard? I saw that there are 3 pins.
Re: V7s nie uruchamia się - doesn't work.
Posted: Wed Mar 15, 2023 2:08 pm
by cpr43
przeeemek1 wrote: ↑Wed Mar 15, 2023 7:01 am
Do you have any instructions? I understand that you have to connect directly to the motherboard? I saw that there are 3 pins.
viewtopic.php?f=51&t=321
Re: V7s nie uruchamia się - doesn't work.
Posted: Wed Mar 15, 2023 7:37 pm
by Feralkiwi
Re: V7s nie uruchamia się - doesn't work.
Posted: Mon Mar 20, 2023 9:16 pm
by przeeemek1
Ok, I have rs232 --> USB cable and windows 10. I'm stuck on "please reset slave STB". I cannot start uploading the file.
Re: V7s nie uruchamia się - doesn't work.
Posted: Tue Mar 21, 2023 2:22 am
by Feralkiwi
Check you have the correct port number.
Here are my notes here on that.
Owen