Having a issue in setting up the said receiver to scan in terrestrial TV channels with the Mars software.
Completely different to when i last scanned in the said channels before updating to Mars, last time was straight forward.
Not sure on how to put in the information in the receiver to carry out a scan, the channels are on UHF 39 / 40 / 42 / 43 / 45 / 46 and 48.
Frequency 618 / 626 / 642 / 650 / 666 / 674 and 690 from the Main Transmitter at SUTTON COLDFIELD, for the Midlands area of the UK.
Any photo's would help.
Den
Setting up / Scanning DVB-T/DVB-T2 V7Pro Mars
Moderators: admin, GTMedia Team
Re: Setting up / Scanning DVB-T/DVB-T2 V7Pro Mars
You private message me, we communicateSTRETCH wrote: ↑Sun Mar 19, 2023 11:24 amHaving a issue in setting up the said receiver to scan in terrestrial TV channels with the Mars software.
Completely different to when i last scanned in the said channels before updating to Mars, last time was straight forward.
Not sure on how to put in the information in the receiver to carry out a scan, the channels are on UHF 39 / 40 / 42 / 43 / 45 / 46 and 48.
Frequency 618 / 626 / 642 / 650 / 666 / 674 and 690 from the Main Transmitter at SUTTON COLDFIELD, for the Midlands area of the UK.
Any photo's would help.
Den
FREESAT brand change GT MEDlA
Re: Setting up / Scanning DVB-T/DVB-T2 V7Pro Mars
After checking with a V8 Turbo (old software), i was able to scan in the DVB-T / DVB-T2 channels from my Main transmitter at Sutton Coldfield, also the receiver scanned in the channels from a relay transmitter at Bromsgrove with the channels been on different UHF channels / Frequencies, with it been in line with the main transmitter, so i got two of every thing, channel wise.
Have now set up the V8UHD (Mars), with the details from the V8 Turbo, Good signal Strength 95% / Quality 85% on all frequencies, channels found, all correct, thats the V8UHD done, will give update on the V7 Pro.
Went back to the V7 Pro (Mars), I deleted all the Frequencies, then just put in the Frequencies from Sutton Coldfield, which i now know are correct from the V8Turbo / V8UHD, scanned in all channels, all correct, as they should be.
Took a while to get there, all works as it should.
Den
Have now set up the V8UHD (Mars), with the details from the V8 Turbo, Good signal Strength 95% / Quality 85% on all frequencies, channels found, all correct, thats the V8UHD done, will give update on the V7 Pro.
Went back to the V7 Pro (Mars), I deleted all the Frequencies, then just put in the Frequencies from Sutton Coldfield, which i now know are correct from the V8Turbo / V8UHD, scanned in all channels, all correct, as they should be.
Took a while to get there, all works as it should.
Den