Page 1 of 1
Dodanie kanału do listy
Posted: Fri Oct 20, 2023 6:00 pm
by pipi34
Witam. Może mi ktoś pomoże jak dodać nowy kanał do listy programów w Gt media v7 pro. ? Z góry dziękuję!!!
Re: Dodanie kanału do listy
Posted: Fri Oct 20, 2023 6:21 pm
by STRETCH
On what satellite/transponder.
What software do you have on the receiver.
Den
Re: Dodanie kanału do listy
Posted: Sun Oct 22, 2023 11:49 am
by pipi34
65 (12,015 GHz, pol. H, SR: 27500, FEC: 3/4; DVB-S2/8PSK) satelity Eutelsat Hot Bird 13B (13°E
Re: Dodanie kanału do listy
Posted: Sun Oct 22, 2023 11:50 am
by pipi34
Orginalne oprogramowanie bez mars.
Re: Dodanie kanału do listy
Posted: Mon Oct 23, 2023 5:14 pm
by STRETCH
You could try this, When on the satellite that you require to update a transponder to find new channels.
Menu / Installation / OK / The curser should be on the satellite that you are viewing / Press (SAT) on the remote, this should bring up the list of Transponders that you have scanned into the receiver / Move the Curser to what ever transponder you wish to scan / Then Press the (Blue) button on the remote / at the next window you should get the following (TP SEARCH) / Scan Mode (Normal) / FTA Only ( YES/NO ) / Scan Channel ( TV ) / Network Search ( No ) / Then Press OK, when the scan is complete, any New channels found should be at the End of your channel list.
To ADD a transponder to your list, carry out above, but after you Press (SAT) on the remote, at this point Press the (RED) Button on the remote, put in the NEW details, then Save, then carry out the scan.
Den
Re: Dodanie kanału do listy
Posted: Tue Oct 24, 2023 7:41 pm
by pipi34
Bardzo dziękuję za podpowiedź. Była bardzo przydatna.
Re: Dodanie kanału do listy
Posted: Sun Nov 19, 2023 7:20 am
by Lylawa
You might want to consider method for updating a transponder to discover new channels: Navigate to Menu / Installation / OK, ensuring the cursor is on the relevant satellite. Press (SAT) on the remote to access the list of scanned transponders. Move the cursor to the desired transponder, press the (Blue) button, and initiate the scan with specified settings. To add a new transponder, follow the same steps but press the (RED) button after (SAT), input the details, save, and then conduct the scan.