Good Day new to the forum and already posted in the wrong area...lol

V7 TT Pro / V7S HD /V7 Plus/V7 S2X /V7PRO/ V7 TT

Moderators: admin, GTMedia Team

Post Reply
User avatar
Marsat
Posts: 748
Joined: Tue Jun 19, 2018 6:52 am
Location: Miami

Re: good ay new to the forum and all ready posted int he wrong area...lol

Post by Marsat »

Hello and welcome!

floater wrote: for use for sats 89 west through 133 west on a 8 ft c-band mess dish
Well is your dish is a mess :roll: :roll: :roll: I don't think any brand would work! :lol: :lol: :lol:

XXXX appart

IMHO the most reliable and stable decoder from this brand is V8 Super

I have a Dish Farm at home and I have from 5W to 133 Both C and Ku.
3 receivers active. 2 at Family room and 1 at Master Bedroom

Note: your dish will not be a steady signal in Ku Band due is a mesh

Good Luck

machteck
Posts: 233
Joined: Thu Dec 28, 2017 4:25 pm
Location: EctorTexas

Re: good ay new to the forum and all ready posted int he wrong area...lol

Post by machteck »

floater wrote:well just bought a plain plain ole freesat v7 hd ...hope to learn how to use it properly.......lots of reading and experimenting........lol

I hope u don't.bricking it, but if u do: there is instructions on how to revive it in the forum. 8-)
Larry

User avatar
quark
Posts: 60
Joined: Wed Aug 22, 2018 7:16 pm

Re: good ay new to the forum and all ready posted int he wrong area...lol

Post by quark »

Hey floater, I just received my V7 HD and it is a breeze to get working. Works fine with my 12' mesh dish, 8' solid and my 39" dish. I have bricked a few receivers due to power fluctuations. Now I always use a UPS battery backup system when I'm upgrading. Haven't had any problems since.

User avatar
Marsat
Posts: 748
Joined: Tue Jun 19, 2018 6:52 am
Location: Miami

Re: good ay new to the forum and all ready posted int he wrong area...lol

Post by Marsat »

floater wrote:thers a how to somwere on here..see if i can finnd it..... :?:
where are here to help you when needed just yell or make smoking signals ;)

User avatar
quark
Posts: 60
Joined: Wed Aug 22, 2018 7:16 pm

Re: Good Day new to the forum and already posted in the wrong area...lol

Post by quark »

floater,

Feralkiwi wrote some instructions here: viewtopic.php?f=51&t=475&sid=3b39b73cc0 ... 10543f3b68

Good Luck

crunk2
Posts: 27
Joined: Tue Aug 14, 2018 7:50 pm

Re: Good Day new to the forum and already posted in the wrong area...lol

Post by crunk2 »

floater wrote:hard to believe dis little itsy bitsy ting woks.....am blindscannin..... :lol:
same thing I thought when I got mine lol but wow it does the job

Eak_Dumnern
网站管理员
Posts: 667
Joined: Thu Aug 11, 2016 10:58 am
Location: Thailand

Re: Good Day new to the forum and already posted in the wrong area...lol

Post by Eak_Dumnern »

Every one say before any doing ,you are learn instruction and manual then setting later, I am trust this box did not brick or paperweight.

Ps: This box show menu import softcam.key after press 6666 on menu at remote control.

floater
Posts: 29
Joined: Wed Aug 08, 2018 1:16 am

Re: Good Day new to the forum and already posted in the wrong area...lol

Post by floater »

still running strong amazing :lol:

floater
Posts: 29
Joined: Wed Aug 08, 2018 1:16 am

Re: Good Day new to the forum and already posted in the wrong area...lol

Post by floater »

i cannot post in the softcam request section is there a reason why...can i be added to that section please? :?:

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: Good Day new to the forum and already posted in the wrong area...lol

Post by cpr43 »

floater wrote:
Sun Jun 30, 2019 9:17 am
i cannot post in the softcam request section is there a reason why...can i be added to that section please? :?:
yes, you need to ask access in here:

viewtopic.php?f=33&t=13146

User avatar
Feralkiwi
网站管理员
Posts: 8340
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: Good Day new to the forum and already posted in the wrong area...lol

Post by Feralkiwi »

floater wrote:
Sun Jun 30, 2019 9:17 am
i cannot post in the softcam request section is there a reason why...can i be added to that section please? :?:
Done

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

Jehisonn
Posts: 16
Joined: Tue Apr 09, 2019 8:10 pm
Location: Colombia

Re: Good Day new to the forum and already posted in the wrong area...lol

Post by Jehisonn »

hello a question the gtmedia v7s hd serve for TDT

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: Good Day new to the forum and already posted in the wrong area...lol

Post by cpr43 »

Jehisonn wrote:
Sun Jun 30, 2019 8:11 pm
hello a question the gtmedia v7s hd serve for TDT
What is TDT?

User avatar
nothinghf
Posts: 6
Joined: Fri Jul 05, 2019 12:28 pm

Re: Good Day new to the forum and already posted in the wrong area...lol

Post by nothinghf »

quark wrote:
Sun Aug 26, 2018 5:37 pm
floater,

Feralkiwi wrote some instructions here: http://www.freesat.cn/forum/viewtopic.p ... 10543f3b68

Good Luck
Este link está muerto?
Algún otro para esas instrucciones?

User avatar
cpr43
网站管理员
Posts: 7049
Joined: Thu Aug 11, 2016 1:41 pm

Re: Good Day new to the forum and already posted in the wrong area...lol

Post by cpr43 »

nothinghf wrote:
Fri Jul 05, 2019 2:29 pm
quark wrote:
Sun Aug 26, 2018 5:37 pm
floater,

Feralkiwi wrote some instructions here: http://www.freesat.cn/forum/viewtopic.p ... 10543f3b68

Good Luck
Este link está muerto?
Algún otro para esas instrucciones?
El post tiene varios temas incluidos. Como te podemos ayudar??

ceritos
Posts: 9
Joined: Tue May 14, 2019 5:49 am

Re: Good Day new to the forum and already posted in the wrong area...lol

Post by ceritos »

cpr43 wrote:
Mon Jul 01, 2019 1:10 am
Jehisonn wrote:
Sun Jun 30, 2019 8:11 pm
hello a question the gtmedia v7s hd serve for TDT
What is TDT?
Spanish for Digital Terrestrial TV - refers to DVB-T2 if the country in question is Spain or Colombia

Post Reply

Return to “GTMEDIA V7 SERIES”