Is there any way to adjust the motor in the GTMEDIA V8 TURBO for fine motor adjustment in DiSEqC1/USALS?
I do not see anyway to fine to the signal? Any help would be appreciated.
Also having issues with motor moving.
PS. I never had a satellite box that was so hard to navigate it's menu structure.
For a new 2020/2021 box, this is a throw back to the 90's.
I have had a ton of boxes, like Viewsat, Sonicview, X2sat, Coolsat and others that were way better.
I expected more from this box but I am dissapointed in it's perfomance.
Thanks....
GTMEDIA V8 TURBO Motor Adjustment
Moderators: admin, GTMedia Team
Re: GTMEDIA V8 TURBO Motor Adjustment
hello
thank you very much for your feedback.
Can you help us to optimize and improve the process of the motor adjustment?
If you can,we will be very grateful.
Can you give us more information of your issue,which steps are inconvenient?
Because you have used a more convenient machine.If it is convenient, can you help us take a video file of other machine operations?
Then send the file to this email address support@gtmedia.cc
Looking forward to your help to make our products more convenient.
thank you very much for your feedback.
Can you help us to optimize and improve the process of the motor adjustment?
If you can,we will be very grateful.
Can you give us more information of your issue,which steps are inconvenient?
Because you have used a more convenient machine.If it is convenient, can you help us take a video file of other machine operations?
Then send the file to this email address support@gtmedia.cc
Looking forward to your help to make our products more convenient.
Re: GTMEDIA V8 TURBO Motor Adjustment
In the antenna setting menu click on the USALS or DiSEqC and the motor control menu opens.CoolKat wrote: ↑Sat Oct 23, 2021 4:51 pmIs there any way to adjust the motor in the GTMEDIA V8 TURBO for fine motor adjustment in DiSEqC1/USALS?
I do not see anyway to fine to the signal? Any help would be appreciated.
Also having issues with motor moving.
PS. I never had a satellite box that was so hard to navigate it's menu structure.
For a new 2020/2021 box, this is a throw back to the 90's.
I have had a ton of boxes, like Viewsat, Sonicview, X2sat, Coolsat and others that were way better.
I expected more from this box but I am dissapointed in it's perfomance.
Thanks....
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 320
- Joined: Sun Oct 28, 2018 5:33 pm
- Location: Russia - Kuban - Krasnodar - 45.02°N 38.59°E
Re: GTMEDIA V8 TURBO Motor Adjustment
- Attachments
-
- DiSEqC.png (663.6 KiB) Viewed 462 times
-
- USALS.png (545.41 KiB) Viewed 462 times
GTMEDIA GTX Combo, GTMEDIA GT Combo, GTMEDIA V8 UHD, GTMEDIA X8, GTMEDIA X8 Combo, GTMEDIA V8 Turbo and GTMEDIA V7 Pro
GTMedia V8FINDER Pro2, V8Finder Pro, V8 Finder Max, V8FINDER2, V8Finder-Meter, GTMEDIA V8 Finder BT05 and GTMEDIA D2
GTMedia V8FINDER Pro2, V8Finder Pro, V8 Finder Max, V8FINDER2, V8Finder-Meter, GTMEDIA V8 Finder BT05 and GTMEDIA D2
Re: GTMEDIA V8 TURBO Motor Adjustment
Within the (DISEQ 1.2) setting, it would be nice to have better control over the movement.
With moving the dish with the remote, could it be done so that when you move the left/right arrows the motor just moves by (ONE CLICK) and not continuous as now and the user has to stop the movement.
With the receiver doing the work for you, would be better, when you have the signal at it's best, then go to (SAVE).
Den
With moving the dish with the remote, could it be done so that when you move the left/right arrows the motor just moves by (ONE CLICK) and not continuous as now and the user has to stop the movement.
With the receiver doing the work for you, would be better, when you have the signal at it's best, then go to (SAVE).
Den