Page 2 of 10
Re: Smartcard supported by V8X
Posted: Thu Jun 18, 2020 3:29 pm
by alex.c
zamizal wrote: ↑Thu Jun 18, 2020 3:13 pm
alex.c wrote: ↑Thu Jun 18, 2020 2:55 pm
zamizal wrote: ↑Thu Jun 18, 2020 2:45 pm
What problem?
auto bisskey not working
ca slot not working
Help help help
AutoBiss need network, please make sure your network connect is OK.
what card are you using?
Astro card lynsat 91.5E skybox working
Network connect is ok
What problem?
CAID 09AC? unfortunately, not supported yet. But it can be, if you want to help.
Did the dialog of AutoBiss calculating pop up?
Did you finish the calculating?
what channel are you watching?
Re: Smartcard supported by V8X
Posted: Thu Jun 18, 2020 3:35 pm
by alex.c
When the dialog of Autobiss calculating show, just wait it complete. It will take 1-5minutes, and then you can watch another channel, and after a few minutes, switch back to check. If it don't finish, maybe you should try the other channels.
Re: Smartcard supported by V8X
Posted: Thu Jun 18, 2020 3:48 pm
by Peugeot 207
alex.c wrote: ↑Thu Jun 18, 2020 3:35 pm
When the dialog of Autobiss calculating show, just wait it complete. It will take 1-5minutes, and then you can watch another channel, and after a few minutes, switch back to check. If it don't finish, maybe you should try the other channels.
Tryed all feeds available at the moment on 7E. No one want open.
Waited approx. 20 minutes for each feed.
All the time : AutoBISS calculating....please wait..... persist.
Never shown: Finish calculating, or whatever shall be displayes.
Re: Smartcard supported by V8X
Posted: Thu Jun 18, 2020 4:16 pm
by alex.c
maybe you can record a ts stream for me.
I will check what's wrong.
Anyway, Auto Biss can't decode all biss channels.
Re: Smartcard supported by V8X
Posted: Thu Jun 18, 2020 4:33 pm
by Peugeot 207
alex.c wrote: ↑Thu Jun 18, 2020 4:16 pm
maybe you can record a ts stream for me.
I will check what's wrong.
Anyway, Auto Biss can't decode all biss channels.
Ok
Will try to do that. ( TS record )
Anyway.....
Tryed a Viacess 3.0 card CAID 0500 for HRT ( Croatian Radio Television ) ( Hrvatska Radiotelevizija ) broadcasted on 16E frequency 11636 V 30000
It works properly.
But....
The V8X itself doesn't activated monthly entitlements ( had to do that in Viacess Cam ( the red one ) )
So.. after entitlements activation works perfect on V8X
If you want, can be added to 1st post
Re: Smartcard supported by V8X
Posted: Thu Jun 18, 2020 4:37 pm
by Peugeot 207
Another one thing...
This particulary TP ( 11636 V 30000 ) doesn't show V ( Viaccess ) encryption, but only NDS
It had to be showed both of them.
Anyway.....
Viacess opened although Viaccess not marked as available encryption.
Cheerse
Re: Smartcard supported by V8X
Posted: Thu Jun 18, 2020 4:48 pm
by Peugeot 207
Oopps
Finally
Got my first ever CW
Channel opened in TWO SECONDS
Very nice
But .....
Can't find where this CW is stored.
I want to know where CW were stored, so can share that CW to my other recievers.
PLS let me know
Re: Smartcard supported by V8X
Posted: Thu Jun 18, 2020 6:52 pm
by Peugeot 207
Ok
Got many CW's today.
Some of them faster , others slower.
In general.... it's a bit slower than expected.
This could be a very nice box..... in future.
Had lot of potential, but also there is lot of work to do, untill....
Re: Smartcard supported by V8X
Posted: Thu Jun 18, 2020 11:21 pm
by alex.c
Peugeot 207 wrote: ↑Thu Jun 18, 2020 4:33 pm
alex.c wrote: ↑Thu Jun 18, 2020 4:16 pm
maybe you can record a ts stream for me.
I will check what's wrong.
Anyway, Auto Biss can't decode all biss channels.
Ok
Will try to do that. ( TS record )
Anyway.....
Tryed a Viacess 3.0 card CAID 0500 for HRT ( Croatian Radio Television ) ( Hrvatska Radiotelevizija ) broadcasted on 16E frequency 11636 V 30000
It works properly.
But....
The V8X itself doesn't activated monthly entitlements ( had to do that in Viacess Cam ( the red one ) )
So.. after entitlements activation works perfect on V8X
If you want, can be added to 1st post
Thank you.
We will try to fix the entitlement issue of viaccess 3.0.
And about the CA system indicator, if users really care about it,
we can make it better.
Re: Smartcard supported by V8X
Posted: Fri Jun 19, 2020 3:40 am
by Feralkiwi
alex.c wrote: ↑Thu Jun 18, 2020 11:50 am
Yes, SkyNZ card 0958 is not supported.
Does this mean that a ccam for this card TO the V8X will also not work?
Owen
Re: Smartcard supported by V8X
Posted: Fri Jun 19, 2020 3:52 am
by alex.c
Feralkiwi wrote: ↑Fri Jun 19, 2020 3:40 am
alex.c wrote: ↑Thu Jun 18, 2020 11:50 am
Yes, SkyNZ card 0958 is not supported.
Does this mean that a ccam for this card TO the V8X will also not work?
Owen
No, iks and smartcard is different.
IKS always works if ECM pid can be parsed.
Re: Smartcard supported by V8X
Posted: Fri Jun 19, 2020 1:47 pm
by tanka
The last box I order V8x about 90 Days at Alixpress only today?Canada post said today I ope.Now I order the V8 UHD from ebay usa and only delivery by Sptember.Crismas probaly.Epidemia big problem.I have 4 orders from China to received from now.
Re: Smartcard supported by V8X
Posted: Fri Jun 19, 2020 5:37 pm
by zamizal
alex.c wrote: ↑Thu Jun 18, 2020 3:29 pm
zamizal wrote: ↑Thu Jun 18, 2020 3:13 pm
alex.c wrote: ↑Thu Jun 18, 2020 2:55 pm
zamizal wrote: ↑Thu Jun 18, 2020 2:45 pm
What problem?
auto bisskey not working
ca slot not working
Help help help
AutoBiss need network, please make sure your network connect is OK.
what card are you using?
Astro card lynsat 91.5E skybox working
Network connect is ok
What problem?
CAID 09AC? unfortunately, not supported yet. But it can be, if you want to help.
Did the dialog of AutoBiss calculating pop up?
Did you finish the calculating?
what channel are you watching?
unlimited high speed internet
78.5E Thaicom5/6/8
auto bisskey not working
Re: Smartcard supported by V8X
Posted: Fri Jun 19, 2020 11:26 pm
by alex.c
Please tell me the detail frequency and channel name you test.
I saw a lot of keys in server, it should work correctly.
Re: Smartcard supported by V8X
Posted: Sat Jun 20, 2020 3:00 pm
by zamizal
alex.c wrote: ↑Fri Jun 19, 2020 11:26 pm
Please tell me the detail frequency and channel name you test.
I saw a lot of keys in server, it should work correctly.
Thaicom5/6/8
for example frequency: 12604 v 30000
Re: Smartcard supported by V8X
Posted: Sat Jun 20, 2020 3:57 pm
by alex.c
zamizal wrote: ↑Sat Jun 20, 2020 3:00 pm
alex.c wrote: ↑Fri Jun 19, 2020 11:26 pm
Please tell me the detail frequency and channel name you test.
I saw a lot of keys in server, it should work correctly.
Thaicom5/6/8
for example frequency: 12604 v 30000
Try Peace TV, it should work.
Again, AutoBISS can't decode every BISS channel.
sometimes you need a little luck.
Re: Smartcard supported by V8X
Posted: Sat Jun 20, 2020 4:48 pm
by zamizal
alex.c wrote: ↑Sat Jun 20, 2020 3:57 pm
zamizal wrote: ↑Sat Jun 20, 2020 3:00 pm
alex.c wrote: ↑Fri Jun 19, 2020 11:26 pm
Please tell me the detail frequency and channel name you test.
I saw a lot of keys in server, it should work correctly.
Thaicom5/6/8
for example frequency: 12604 v 30000
Try Peace TV, it should work.
Again, AutoBISS can't decode every BISS channel.
sometimes you need a little luck.
Thaicom5/6/8 12604 v 30000
All channel
autobiss: calculating! please wait
the view for almost 30 minutes has not changed
Re: Smartcard supported by V8X
Posted: Mon Jun 22, 2020 4:21 pm
by zamizal
please upgrade to the (CAID 09AC Videoguard) astro card as soon as possible
Re: Smartcard supported by V8X
Posted: Tue Jun 23, 2020 2:04 am
by alex.c
zamizal wrote: ↑Mon Jun 22, 2020 4:21 pm
please upgrade to the (CAID 09AC Videoguard) astro card as soon as possible
Actually, I don't have any card of VideoGuard, so we didn't support VideoGuard card yet.
The best way is you can buy a VideoGuard card and send it to us. We will pay the bill.
So if you can please PM me for detail.
Re: Smartcard supported by V8X
Posted: Tue Jun 23, 2020 3:43 am
by hazman
A common interface slot on these receivers would be great. Let the cam do all the work.
Re: Smartcard supported by V8X
Posted: Tue Jun 23, 2020 3:48 am
by alex.c
hazman wrote: ↑Tue Jun 23, 2020 3:43 am
A common interface slot on these receivers would be great. Let the cam do all the work.
It is a common interface, but the cam is not.
So we need to support the CA cards one by one.
Re: Smartcard supported by V8X
Posted: Wed Jun 24, 2020 2:05 am
by hazman
This is a conditional access module that takes a card and goes into a common interface slot.
- OIP.jpg (5.62 KiB) Viewed 63788 times
Re: Smartcard supported by V8X
Posted: Wed Jun 24, 2020 2:26 am
by alex.c
You don't need the coat, and you can insert the card into V8X directly.
Re: Smartcard supported by V8X
Posted: Wed Jun 24, 2020 10:37 am
by Eak_Dumnern
zamizal wrote: ↑Fri Jun 19, 2020 5:37 pm
alex.c wrote: ↑Thu Jun 18, 2020 3:29 pm
zamizal wrote: ↑Thu Jun 18, 2020 3:13 pm
alex.c wrote: ↑Thu Jun 18, 2020 2:55 pm
zamizal wrote: ↑Thu Jun 18, 2020 2:45 pm
What problem?
auto bisskey not working
ca slot not working
Help help help
AutoBiss need network, please make sure your network connect is OK.
what card are you using?
Astro card lynsat 91.5E skybox working
Network connect is ok
What problem?
CAID 09AC? unfortunately, not supported yet. But it can be, if you want to help.
Did the dialog of AutoBiss calculating pop up?
Did you finish the calculating?
what channel are you watching?
unlimited high speed internet
78.5E Thaicom5/6/8
auto bisskey not working
Thaicom6/8 have some TP auto bisss key not working but almost TP is work fine.
Re: Smartcard supported by V8X
Posted: Wed Jun 24, 2020 10:40 am
by alex.c
Yes, I checked the keys of 78.5 E, almost all of the keys were known several years ago. Never changed in 5 years.