Page 4 of 10
Re: Smartcard supported by V8X
Posted: Mon Aug 17, 2020 11:40 am
by zzeeennn5799
Hi!
After inserting the Conax CAID 0B01 - TNK Polish TV card,13E ident 01 the receiver freezes.
The screen shows the card number and other card details.
Only turning off the power and removing the card helps then everything works.
Someone tell me what's wrong.
Re: Smartcard supported by V8X
Posted: Tue Aug 18, 2020 8:52 am
by alex.c
zzeeennn5799 wrote: ↑Mon Aug 17, 2020 11:40 am
Hi!
After inserting the Conax CAID 0B01 - TNK Polish TV card,13E ident 01 the receiver freezes.
The screen shows the card number and other card details.
Only turning off the power and removing the card helps then everything works.
Someone tell me what's wrong.
Hi, friend.
Where do you come from?
Do you know if your card is paired with your box?
Re: Smartcard supported by V8X
Posted: Tue Aug 18, 2020 9:00 am
by zzeeennn5799
Cześć!
jestem z Polski, karta nie jest sparowana z odbiornikiem, w tej chwili brak uprawnień na karcie.
Hi! I'm from Poland, the card is not paired with the receiver, at the moment no authorization on the card.
the card freezes my receiver V8X
Re: Smartcard supported by V8X
Posted: Tue Aug 18, 2020 9:50 am
by alex.c
zzeeennn5799 wrote: ↑Tue Aug 18, 2020 9:00 am
Cześć!
jestem z Polski, karta nie jest sparowana z odbiornikiem, w tej chwili brak uprawnień na karcie.
Hi! I'm from Poland, the card is not paired with the receiver, at the moment no authorization on the card.
the card freezes my receiver V8X
We have tested this card, and it works.
Did you upgrade the latest firmware?
Re: Smartcard supported by V8X
Posted: Tue Aug 18, 2020 12:03 pm
by Lining
zzeeennn5799 wrote: ↑Tue Aug 18, 2020 9:00 am
Cześć!
jestem z Polski, karta nie jest sparowana z odbiornikiem, w tej chwili brak uprawnień na karcie.
Hi! I'm from Poland, the card is not paired with the receiver, at the moment no authorization on the card.
the card freezes my receiver V8X
We have reproduced it and we will help you solve it
Re: Smartcard supported by V8X
Posted: Tue Aug 18, 2020 3:18 pm
by zzeeennn5799
Tak mam firmware najnowsze z 12/08/2020.
Yes, I have the latest firmware from 12/08/2020.
Today I checked when I put the card into the receiver that is turned on, the tuner freezes after reading the card data. When I turn off the tuner, insert the card and turn on the V8X, the tuner does not see the card but it does not freeze.
Re: Smartcard supported by V8X
Posted: Tue Aug 18, 2020 5:51 pm
by HierMann
Can it support ORF (IRDETO) Card?
my ORF card does not work
Re: Smartcard supported by V8X
Posted: Wed Aug 19, 2020 3:10 am
by alex.c
zzeeennn5799 wrote: ↑Tue Aug 18, 2020 3:18 pm
Tak mam firmware najnowsze z 12/08/2020.
Yes, I have the latest firmware from 12/08/2020.
Today I checked when I put the card into the receiver that is turned on, the tuner freezes after reading the card data. When I turn off the tuner, insert the card and turn on the V8X, the tuner does not see the card but it does not freeze.
Ok, friend.
We confirmed this issue.
We will fix this problem ASAP.
Thank you for your report.
Re: Smartcard supported by V8X
Posted: Wed Aug 19, 2020 3:11 am
by alex.c
HierMann wrote: ↑Tue Aug 18, 2020 5:51 pm
Can it support ORF (IRDETO) Card?
my ORF card does not work
Is your card paired with your decoder?
Re: Smartcard supported by V8X
Posted: Wed Aug 19, 2020 12:27 pm
by HierMann
ORF (IRDETO) Card is not paired with a decoder.
it also runs normally with XXXXXX (with SmartCard Reader)
Re: Smartcard supported by V8X
Posted: Wed Aug 19, 2020 1:39 pm
by alex.c
HierMann wrote: ↑Wed Aug 19, 2020 12:27 pm
ORF (IRDETO) Card is not paired with a decoder.
it also runs normally with XXXXXX (with SmartCard Reader)
OK, that's good.
Can you send the card to us?
I think I can fix it for you.
Re: Smartcard supported by V8X
Posted: Wed Aug 19, 2020 4:36 pm
by HierMann
Thanks alex.c
Re: Smartcard supported by V8X
Posted: Wed Aug 19, 2020 8:24 pm
by pante
zzeeennn5799 wrote: ↑Tue Aug 18, 2020 3:18 pm
Tak mam firmware najnowsze z 12/08/2020.
Yes, I have the latest firmware from 12/08/2020.
Today I checked when I put the card into the receiver that is turned on, the tuner freezes after reading the card data. When I turn off the tuner, insert the card and turn on the V8X, the tuner does not see the card but it does not freeze.
Witaj,
Urządzenie V8X działa bardzo dobrze z kartą w systemie Conax. Uprawnienia TNK przechodzą bez problemu. Przywróć urządzenie do ustawień fabrycznych. Sprawdź styki karty czy nie są zanieczyszczone. Zapewniam ciebie, że urządzenie pracuje bardzo dobrze z tą kartą. Proszę sprawdź czy dostępne jest nowe oprogramowanie. Urządzenie współpracuje bardzo dobrze także ze spliterami.
Hello,
The V8X works very well with the card in the Conax system. Updating TNK permissions are easily transferred to the card. Restore device to factory settings. Check that the contacts of the card are not dirty. I can assure you that the device works very well with this card. Please check if new software is available. The device also works very well with splitter cards.
Re: Smartcard supported by V8X
Posted: Thu Aug 20, 2020 1:29 am
by alex.c
HierMann wrote: ↑Wed Aug 19, 2020 4:36 pm
Thanks alex.c
I need the card itself.
not just the picture.
Re: Smartcard supported by V8X
Posted: Thu Aug 20, 2020 11:28 am
by zzeeennn5799
pante wrote: ↑Wed Aug 19, 2020 8:24 pm
zzeeennn5799 wrote: ↑Tue Aug 18, 2020 3:18 pm
Tak mam firmware najnowsze z 12/08/2020.
Yes, I have the latest firmware from 12/08/2020.
Today I checked when I put the card into the receiver that is turned on, the tuner freezes after reading the card data. When I turn off the tuner, insert the card and turn on the V8X, the tuner does not see the card but it does not freeze.
Witaj,
Urządzenie V8X działa bardzo dobrze z kartą w systemie Conax. Uprawnienia TNK przechodzą bez problemu. Przywróć urządzenie do ustawień fabrycznych. Sprawdź styki karty czy nie są zanieczyszczone. Zapewniam ciebie, że urządzenie pracuje bardzo dobrze z tą kartą. Proszę sprawdź czy dostępne jest nowe oprogramowanie. Urządzenie współpracuje bardzo dobrze także ze spliterami.
Hello,
The V8X works very well with the card in the Conax system. Updating TNK permissions are easily transferred to the card. Restore device to factory settings. Check that the contacts of the card are not dirty. I can assure you that the device works very well with this card. Please check if new software is available. The device also works very well with splitter cards.
Thank you Pante!
I think my card is damaged, I will check it on a different receiver.
Pante - Wiesz może jak sprawdzić czy moja karta jest uszkodzona?
When the V8X is set to the uncoded channel, the image does not stutter, you can read the data from the card - no permissions at the moment.
If I switch to a channel encoded in conax, the tuner freezes and you need to disconnect from the power and remove the card to work
Re: Smartcard supported by V8X
Posted: Thu Aug 20, 2020 6:38 pm
by pante
Witaj kolego zzeeennn5799 !
First:
1. Check if the card is paid.
2. Tune to the TVP1 HD TV channel
3. The permissions will be downloaded.
4. The card information will show the current eligibility date.
Info:
1. Please update the software again.
2. Align the Hotbird 13E antenna correctly. If you are using DiSEqC on Astra 19.2E, the settings must be correctly selected in the antenna settings (e.g. port 1 or port 2)
3. Scan the sky again.
4. Tune to the TVP1 HD TV channel for the card to be authorized (from 4 minutes to several hours )
5. Gently clean the gold contacts of the code card with an eraser or alcohol.
The V8X device works very well with the CONAX card. The operation of the device is very stable.
Re: Smartcard supported by V8X
Posted: Thu Aug 20, 2020 6:52 pm
by zzeeennn5799
pante wrote: ↑Thu Aug 20, 2020 6:38 pm
Witaj kolego zzeeennn5799 !
First:
1. Check if the card is paid.
2. Tune to the TVP1 HD TV channel
3. The permissions will be downloaded.
4. The card information will show the current eligibility date.
Info:
1. Please update the software again.
2. Align the Hotbird 13E antenna correctly. If you are using DiSEqC on Astra 19.2E, the settings must be correctly selected in the antenna settings (e.g. port 1 or port 2)
3. Scan the sky again.
4. Tune to the TVP1 HD TV channel for the card to be authorized (from 4 minutes to several hours )
5. Gently clean the gold contacts of the code card with an eraser or alcohol.
ad1: dzwoniłem na infolinie, karta jest opłacona. po rozmowie z operatorem ustawiłem na TVP Info ( na kodowanym TVP1 tuner się zawiesza) i nadeszły uprawnienia na kartę - 1pakiet ITI Neovision od 01 do 31 sierpień 2020 r.
Pozostałe pakiety mam nieaktualne , w tym TVN. Nie wiem czy mam jeszcze jakieś uprawnienia otrzymać.
Po ustawieniu tunera na TVP1 lub inny kodowany kanał tuner zawiesza się i pomaga tylko wyjęcie karty oraz ponowne uruchomienie tunera.
Na kanałach niekodowanych odbiór mam idealny. Wszystkie kanały i ustawienia satelity mam poprawne. Działa wszystko w cccam.
Chyba to wina styków karty, kartę mam jeszcze z 2009 roku może się wytarła.
Pozdrawiam.
Re: Smartcard supported by V8X
Posted: Fri Aug 21, 2020 4:08 am
by pante
Hello,
All permissions must be placed on the card. Check the correct antenna installation, do you use a switch or do you only have 1 satellite? Clean the card contacts with an eraser or alcohol. If the permissions are on the card, the channels from TNK must work!
Re: Smartcard supported by V8X
Posted: Fri Aug 21, 2020 5:29 am
by alex.c
zzeeennn5799 wrote: ↑Thu Aug 20, 2020 6:52 pm
pante wrote: ↑Thu Aug 20, 2020 6:38 pm
Witaj kolego zzeeennn5799 !
First:
1. Check if the card is paid.
2. Tune to the TVP1 HD TV channel
3. The permissions will be downloaded.
4. The card information will show the current eligibility date.
Info:
1. Please update the software again.
2. Align the Hotbird 13E antenna correctly. If you are using DiSEqC on Astra 19.2E, the settings must be correctly selected in the antenna settings (e.g. port 1 or port 2)
3. Scan the sky again.
4. Tune to the TVP1 HD TV channel for the card to be authorized (from 4 minutes to several hours )
5. Gently clean the gold contacts of the code card with an eraser or alcohol.
ad1: dzwoniłem na infolinie, karta jest opłacona. po rozmowie z operatorem ustawiłem na TVP Info ( na kodowanym TVP1 tuner się zawiesza) i nadeszły uprawnienia na kartę - 1pakiet ITI Neovision od 01 do 31 sierpień 2020 r.
Pozostałe pakiety mam nieaktualne , w tym TVN. Nie wiem czy mam jeszcze jakieś uprawnienia otrzymać.
Po ustawieniu tunera na TVP1 lub inny kodowany kanał tuner zawiesza się i pomaga tylko wyjęcie karty oraz ponowne uruchomienie tunera.
Na kanałach niekodowanych odbiór mam idealny. Wszystkie kanały i ustawienia satelity mam poprawne. Działa wszystko w cccam.
Chyba to wina styków karty, kartę mam jeszcze z 2009 roku może się wytarła.
Pozdrawiam.
Sorry, friend.
I confirmed the latest firmware can't read some conax cards well.
I will fix it in the next firmware.
Re: Smartcard supported by V8X
Posted: Fri Aug 21, 2020 9:37 am
by zzeeennn5799
Dobrze, w takim razie czekam na nowe firmware
Re: Smartcard supported by V8X
Posted: Fri Aug 28, 2020 3:35 pm
by Trucnh
Today, I received my V8X, but it could not recognize the CA Nagravision
Re: Smartcard supported by V8X
Posted: Sat Aug 29, 2020 2:26 am
by Eusebio20
Buenas Noches
58W Irdeto
Caid 0630
Providers: 4
En la pantalla de Inforamcion CA, me muestra toda la informacion de la tarjera, pero no abre el canal
Amigo @alex.c, alguna sugerencia ???
Saludos
Re: Smartcard supported by V8X
Posted: Mon Aug 31, 2020 3:47 am
by alex.c
Eusebio20 wrote: ↑Sat Aug 29, 2020 2:26 am
Buenas Noches
58W Irdeto
Caid 0630
Providers: 4
En la pantalla de Inforamcion CA, me muestra toda la informacion de la tarjera, pero no abre el canal
Amigo @alex.c, alguna sugerencia ???
Saludos
Hi friend.
Do you know if your card is supported by oscam?
Re: Smartcard supported by V8X
Posted: Mon Aug 31, 2020 1:28 pm
by Eusebio20
alex.c wrote: ↑Mon Aug 31, 2020 3:47 am
Eusebio20 wrote: ↑Sat Aug 29, 2020 2:26 am
Buenas Noches
58W Irdeto
Caid 0630
Providers: 4
En la pantalla de Inforamcion CA, me muestra toda la informacion de la tarjera, pero no abre el canal
Amigo @alex.c, alguna sugerencia ???
Saludos
Hi friend.
Do you know if your card is supported by oscam?
Amigo @alex.c
Revise el listado en la foro oficial, el id de la card no esta soportado por Oscam
Anexo el link para que los compañeros del forum lo consulte si lo necesitan
https://trac.streamboard.tv/oscam/wiki/CardsList
Gracias por la aclaratoria
Saludos
Re: Smartcard supported by V8X
Posted: Wed Sep 02, 2020 4:10 am
by alex.c
Eusebio20 wrote: ↑Mon Aug 31, 2020 1:28 pm
alex.c wrote: ↑Mon Aug 31, 2020 3:47 am
Eusebio20 wrote: ↑Sat Aug 29, 2020 2:26 am
Buenas Noches
58W Irdeto
Caid 0630
Providers: 4
En la pantalla de Inforamcion CA, me muestra toda la informacion de la tarjera, pero no abre el canal
Amigo @alex.c, alguna sugerencia ???
Saludos
Hi friend.
Do you know if your card is supported by oscam?
Amigo @alex.c
Revise el listado en la foro oficial, el id de la card no esta soportado por Oscam
Anexo el link para que los compañeros del forum lo consulte si lo necesitan
https://trac.streamboard.tv/oscam/wiki/CardsList
Gracias por la aclaratoria
Saludos
If the card is not supported by oscam, probably we can't support it too.
I just fixed a bug of irdeto smartcard reader, you can test it in next release.
Thank you.