Page 4 of 24
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Thu Aug 13, 2020 5:54 pm
by Silverose
Please I got a new GTmedia V8 finder two months ago, it worked for just two weeks and now it doesn't detect signal anymore. I've factory reset but still same, I even upgraded the software to see if that would help but it didn't. Any reason or solution for this?
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Thu Aug 13, 2020 9:30 pm
by Feralkiwi
Delirium wrote: ↑Thu Aug 13, 2020 1:12 pm
Ok on V8X
Nothing on V8 PRO 2
Nothing on V8 UHD
Has the channel gone to encryption, but is not flagging the $ so the units are not looking for a code that the V8X is using?
Owen
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Thu Aug 13, 2020 9:31 pm
by Feralkiwi
Silverose wrote: ↑Thu Aug 13, 2020 5:54 pm
Please I got a new GTmedia V8 finder two months ago, it worked for just two weeks and now it doesn't detect signal anymore. I've factory reset but still same, I even upgraded the software to see if that would help but it didn't. Any reason or solution for this?
There is an option for LNB power "ON" "OFF".
Check that that is set correctly.
Owen
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Thu Aug 13, 2020 10:31 pm
by Pionex2020
Would it be possible to add an option to sort satellites by geographical location to the V8UHD? I do not feel comfortable using editors or posted sat lists in my receiver. This should assist in case I need to delete and re-add a satellite.
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Fri Aug 14, 2020 3:43 am
by Feralkiwi
Pionex2020 wrote: ↑Thu Aug 13, 2020 10:31 pm
Would it be possible to add an option to sort satellites by geographical location to the V8UHD? I do not feel comfortable using editors or posted sat lists in my receiver. This should assist in case I need to delete and re-add a satellite.
The best way to do that is to start fresh and enter the satellites in the order you want and scan them in the order you want.
Owen
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Fri Aug 14, 2020 4:29 am
by Delirium
Feralkiwi wrote: ↑Thu Aug 13, 2020 9:30 pm
Delirium wrote: ↑Thu Aug 13, 2020 1:12 pm
Ok on V8X
Nothing on V8 PRO 2
Nothing on V8 UHD
Has the channel gone to encryption, but is not flagging the $ so the units are not looking for a code that the V8X is using?
Owen
I think the channel is FTA
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Fri Aug 14, 2020 4:57 am
by alex.c
Delirium wrote: ↑Fri Aug 14, 2020 4:29 am
Feralkiwi wrote: ↑Thu Aug 13, 2020 9:30 pm
Delirium wrote: ↑Thu Aug 13, 2020 1:12 pm
Ok on V8X
Nothing on V8 PRO 2
Nothing on V8 UHD
Has the channel gone to encryption, but is not flagging the $ so the units are not looking for a code that the V8X is using?
Owen
I think the channel is FTA
Right, we checked, it is FTA.
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Fri Aug 14, 2020 5:15 am
by Delirium
No lock on 8° W - 4153 L - SR 60000 - T2-MI, with V8 UHD
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Fri Aug 14, 2020 5:31 am
by alex.c
Delirium wrote: ↑Fri Aug 14, 2020 5:15 am
No lock on 8° W - 4153 L -
SR 60000 -
T2-MI, with V8 UHD
Can V8X lock this TP?
These are all scrambled channels.
Even you can lock it, you can't scan any channels.
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Fri Aug 14, 2020 5:42 am
by Delirium
alex.c wrote: ↑Fri Aug 14, 2020 5:31 am
Delirium wrote: ↑Fri Aug 14, 2020 5:15 am
No lock on 8° W - 4153 L -
SR 60000 -
T2-MI, with V8 UHD
Can V8X lock this TP?
These are all scrambled channels.
Even you can lock it, you can't scan any channels.
I think also V8X no lock this tp., but I will check again.
Yes, all the channels are encrypted.
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Fri Aug 14, 2020 5:46 am
by alex.c
Delirium wrote: ↑Fri Aug 14, 2020 5:42 am
alex.c wrote: ↑Fri Aug 14, 2020 5:31 am
Delirium wrote: ↑Fri Aug 14, 2020 5:15 am
No lock on 8° W - 4153 L -
SR 60000 -
T2-MI, with V8 UHD
Can V8X lock this TP?
These are all scrambled channels.
Even you can lock it, you can't scan any channels.
I think also V8X no lock this tp., but I will check again.
Yes, all the channels are encrypted.
Right, the symbol rate is too high.
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Fri Aug 14, 2020 6:40 am
by Delirium
@alex.c
Really no signal in this tp. with the receivers (highest SR with V8 UHD is 67500)
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Fri Aug 14, 2020 7:49 am
by alex.c
Delirium wrote: ↑Fri Aug 14, 2020 6:40 am
@alex.c
Really no signal in this tp. with the receivers (highest SR with V8 UHD is 67500)
How do you know highest SR of V8UHD is 67500?
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Fri Aug 14, 2020 9:00 am
by Delirium
alex.c wrote: ↑Fri Aug 14, 2020 7:49 am
Delirium wrote: ↑Fri Aug 14, 2020 6:40 am
@alex.c
Really no signal in this tp. with the receivers (highest SR with V8 UHD is 67500)
How do you know highest SR of V8UHD is 67500?
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Fri Aug 14, 2020 9:08 am
by alex.c
Delirium wrote: ↑Fri Aug 14, 2020 9:00 am
alex.c wrote: ↑Fri Aug 14, 2020 7:49 am
Delirium wrote: ↑Fri Aug 14, 2020 6:40 am
@alex.c
Really no signal in this tp. with the receivers (highest SR with V8 UHD is 67500)
How do you know highest SR of V8UHD is 67500?
Get it.
Actually, V8UHD can't get this limitation.
I think about 55000 is the highest.
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Fri Aug 14, 2020 11:33 am
by Pionex2020
Feralkiwi wrote: ↑Fri Aug 14, 2020 3:43 am
Pionex2020 wrote: ↑Thu Aug 13, 2020 10:31 pm
Would it be possible to add an option to sort satellites by geographical location to the V8UHD? I do not feel comfortable using editors or posted sat lists in my receiver. This should assist in case I need to delete and re-add a satellite.
The best way to do that is to start fresh and enter the satellites in the order you want and scan them in the order you want.
Owen
You are correct its "the best way" but not always practical as some of the sats I like to watch are borderline in reception so I have to scan them when the signal is at its best.
Also if I find a sat I need to add later I will need to do it from scratch.
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Fri Aug 14, 2020 12:31 pm
by skate666
Delirium wrote: ↑Fri Aug 14, 2020 5:15 am
No lock on 8° W - 4153 L -
SR 60000 -
T2-MI, with V8 UHD
i confirm same problem as my friend @Delirium on this Freq. on 8 West. It has many PLP's, all channels Enc. My dish 4.2Mt from North West Italy
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Fri Aug 14, 2020 12:38 pm
by Delirium
Hi skate666
I have the distinct impression that every time you tune a channel encoded in Irdeto the receiver freezes and you have to switch it off and on again. Does anyone confirm?
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Sat Aug 15, 2020 9:04 pm
by Delirium
On V8 UHD full memory with only 4953 tv channels and 47 radio.
I tuned only 12 satellites
And all the others where do I put them ?
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Sun Aug 16, 2020 10:38 am
by Cluster.One
alex.c wrote: ↑Mon Aug 10, 2020 1:07 pm
Cluster.One wrote: ↑Mon Aug 10, 2020 8:58 am
juan_vale wrote: ↑Tue Aug 04, 2020 4:34 pm
V8x Audio problem.
This is a small problem and has a work around but needs attention. When using a channel which has 2nd audio (58w for example Eng/Spa) the first audio works fine. Selecting the 2nd audio you loose sound and have to go up/down a channel to get the 2nd audio. Same happens when you go back to first audio, no sound until you go up/down a channel. It seems the setting is set, but not applied until you change channel. I tested a V7HD and it does not have this problem.
I also noticed this problem on V8X but on ARTE channel (Hotbird 13°E) which has more of three audios, everything works well and audios are heard immediately upon track change
I don't know if this information can be useful:
Arte has more of three dolby AC3 audio channels, while the channels where I found this defect are feeds in which the audio is only mpeg, feed was biss encrypted but made clear, Arte is FTA
Please just wait the next firmware.
I think it will be fixed in the next firmware.
Thank you.
With the latest firmware the problem seems solved, great job!
Thank you
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Sun Aug 16, 2020 7:07 pm
by przeeemek1
1. I can not serch chanels by PID? Problem is with PCR PID. There are only 4 characters and I need to enter 5 digits.
2. if I press the info button twice, I can read the description of the current broadcast. I can see what's next, but can't read the description. Can you add functions so that after pressing the right arrow there will be a description of the next program?
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Mon Aug 17, 2020 6:18 am
by Feralkiwi
Delirium wrote: ↑Sat Aug 15, 2020 9:04 pm
On
V8 UHD full memory with only 4953 tv channels and 47 radio.
I tuned only 12 satellites
And all the others where do I put them ?
That is a low number!
I think I did the same with my V8 Golden some years back at 5000 top.
alex_c please note.
Owen
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Mon Aug 17, 2020 6:20 am
by alex.c
Feralkiwi wrote: ↑Mon Aug 17, 2020 6:18 am
Delirium wrote: ↑Sat Aug 15, 2020 9:04 pm
On
V8 UHD full memory with only 4953 tv channels and 47 radio.
I tuned only 12 satellites
And all the others where do I put them ?
That is a low number!
I think I did the same with my V8 Golden some years back at 5000 top.
alex_c please note.
Owen
Get it.
We will try if we can get more room for more channel storage.
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Tue Aug 18, 2020 12:32 am
by cmoore
We have a GT MEDIA V8X that has difficulty receiving signals from transponders that are very close to each other.
Example we have 3 services on a satellite Optus d2 @ 152e at 12736H 3580mbs,12740H 3580mbs and 12746H 3580mbs. Who are all using the same key in BISS
Even though the 3 chs load when scanned, when you attempt to view them you go to the 1st. ch and it may open then you go to the second ch it sometimes loads or it locks up as it tries to find the BISS key an requires the box to be rebooted and if it does open up sometimes the ch it is showing is wrong as It has decoded the lower ch. this also happens with the 3rd ch. the tuner has difficulty resolving the 3 different chs separately. I have confirmed this using a different receiver.
Re: GTMEDIA_V8 Series Bug Tracking System
Posted: Tue Aug 18, 2020 10:06 am
by alex.c
cmoore wrote: ↑Tue Aug 18, 2020 12:32 am
We have a GT MEDIA V8X that has difficulty receiving signals from transponders that are very close to each other.
Example we have 3 services on a satellite Optus d2 @ 152e at 12736H 3580mbs,12740H 3580mbs and 12746H 3580mbs. Who are all using the same key in BISS
Even though the 3 chs load when scanned, when you attempt to view them you go to the 1st. ch and it may open then you go to the second ch it sometimes loads or it locks up as it tries to find the BISS key an requires the box to be rebooted and if it does open up sometimes the ch it is showing is wrong as It has decoded the lower ch. this also happens with the 3rd ch. the tuner has difficulty resolving the 3 different chs separately. I have confirmed this using a different receiver.
Hi friend,
I sent you a PM.
Please check it.