GTMEDIA Forum

I have created and imported a cccam.cfg. Everything works, except for one thing: the lines are all set to off. I have to switch it on first with the OK button (the label still stays off, but it works). By a restart I have to turn on all lines again manually!! Another mistake? Can I add an option directly in the cccam.cfg so that the lines are already activated during the import?

Androidum wrote:I have created and imported a cccam.cfg. Everything works, except for one thing: the lines are all set to off. I have to switch it on first with the OK button (the label still stays off, but it works). By a restart I have to turn on all lines again manually!! Another mistake? Can I add an option directly in the cccam.cfg so that the lines are already activated during the import?

Hello
care to post the lines you have created?
obviously masking account info

My understanding is that you don't need to, the file default is all lines are set to "ON"

Hello and thank you Marsat!

This is my cccam.cfg file:
For information: If i input manually cccam lines with the remote control, than works and i can activate the lines and also after a restart is always active.

A little more about why I use n-cam and not c-cam. Everything works for c-cam. I must insert only one line (and a second line for the backup server), and good. But it's very unstable!! The picture is always freezing and so on. A user has told me that it runs very stable with n-cam.

And now? Does anyone have a solution to the problem?

Androidum wrote:And now? Does anyone have a solution to the problem?

What box are you using, also you say you have a "cccam.cfg" file, if you have an N-Line then it should be a "newcam" file, save the file as newcam.cfg
it then goes to the NewCam section.
This is how to load a file on the V8 Golden/Super - Insert USB, - Menu - Network - Press 6666 - CS Protocol - Goto either CCcam, NewCam or MgCamd - then press OK on "USB Account", press OK on "Yes" to load the file, then press Apply and "Yes" to confirm, status should show "ECM ready"

Finally a meaningful answer and a possible solution!! THANK YOU!! But i have tested your solution and thats not work - same problem. I have a v8 NOVA. I think it's just a bug. There are lots of them...

Maybe you can help me with this problem too?

http://freesat.cn/forum/viewtopic.php?f ... 059#p40637

I would be very grateful!!

Androidum wrote:Finally a meaningful answer and a possible solution!! THANK YOU!! But i have tested your solution and thats not work - same problem. I have a v8 NOVA. I think it's just a bug. There are lots of them...

Maybe you can help me with this problem too?

http://freesat.cn/forum/viewtopic.php?f ... 059#p40637

I would be very grateful!!

Sorry I don't know anything about the Nova, I have a V8 Golden, it's been very reliable these last 2 years, looks like your Nova has a few bugs.
I never use timeshift so I tried it with the v8 Golden, it's the same as you with the German HD channels on 19e, like DAZN 1 BarHD, they freeze, but it works alright with the Spanish Movistar HD channels like M. DEPORTESHD, could be the same on all Freesat receivers.

Androidum wrote:Hello and thank you Marsat!

This is my cccam.cfg file:

Code: Select all

N: server.xxx 6001 user pass 0102030405060708091011121314
N: server.xxx 6002 user pass 0102030405060708091011121314
N: server.xxx 6003 user pass 0102030405060708091011121314
N: server.xxx 6004 user pass 0102030405060708091011121314

For information: If i input manually cccam lines with the remote control, than works and i can activate the lines and also after a restart is always active.

\
Sorry been busy
If they are cccam and you were told to upload newcamd instead where did you get the deskey in that format
Secondly
YOU may download the configuracion when you enter them manually and you say it works and compare that file with the one you are uploading, A simple space or lack of space between the fields it wont work

As per time shift. I did have the time to tested and yes it randomly stop working on mine too, depending the encrypted channel. I believe the TS file recorded can not be decoded after recorded

Where can I export the cccam settings on v8 NOVA? I find only one option to import, not to export.

Hi,

same Problem here; Sky Germany package freezes, whilst Moviestar runs well. After a short freeze the Picture is played in slow Motion.
Seller of he Box said, they gave Feedback to the engineers. Do you think, a Change of the C-Lines might help, for instance changing the first lane with another one?

BR