Reboot on Blind Scan

V8 NOVA / V8 HONOR / V8 PRO2/V8 UHD / V8X

Moderators: admin, GTMedia Team

Post Reply
Jim
Posts: 213
Joined: Sat Oct 28, 2017 2:24 pm

Reboot on Blind Scan

Post by Jim »

I went to G-13w to do I blind scan and it finds several transponders ok and close to half way like around 50% it reboots and does not finish the 100% scan? I have two V8Supers and a V7hd which do the same thing? I've had this happen before so what I do is use Lyngsat information and manually enter the ones from there into my receiver. There is just a few satellites that do this if I remember right.

Ncaa1976*
Posts: 10
Joined: Sun Mar 24, 2019 11:29 pm

Re: Reboot on Blind Scan

Post by Ncaa1976* »

... Something similar happened to me ;)

Captain Ron
Posts: 548
Joined: Thu Nov 29, 2018 12:50 am

Re: Reboot on Blind Scan

Post by Captain Ron »

I've read of a couple Sat TP's over Europe that can cause lockups and there was a Sat over North America that caused lock up during scanning or on particular TP's so its probably possible for them to cause a reboot now and again and it was on different brand receivers so its probably not your receiver at fault. If it is happening on a particular TP or Channel then maybe test by manually scanning individual TP's or play with removing it from your scan list on that Satellite and play with it when you have time. Its called testing.

Good Luck and Beers to you! :D

Post Reply

Return to “GTMEDIA V8 SERIES”