Page 4 of 29

Re: Softcam Section

Posted: Sun Jun 02, 2019 12:21 am
by albertofco
Thank you.
Best regards

Re: Softcam Section

Posted: Sun Jun 02, 2019 3:16 am
by bwe
satman wrote:
Tue Apr 30, 2019 4:29 pm
Thanks, cpr43. Trying to find the keys for CLEO 103W 3945 V 25000. Hopefully someone has found them.
I'd like to request 103w 3945 V 25000 too. I thought I had these already, but nothing is happening. I have plenty of signal/quality on this TP.

Thanks,
BWE

Re: Softcam Section

Posted: Sun Jun 02, 2019 3:47 am
by james007
bwe wrote:
Sun Jun 02, 2019 3:16 am
satman wrote:
Tue Apr 30, 2019 4:29 pm
Thanks, cpr43. Trying to find the keys for CLEO 103W 3945 V 25000. Hopefully someone has found them.
I'd like to request 103w 3945 V 25000 too. I thought I had these already, but nothing is happening. I have plenty of signal/quality on this TP.

Thanks,
BWE
pm sent

Re: Softcam Section

Posted: Mon Jun 03, 2019 11:53 pm
by luciform
please i want to use softcam section!
thanks in advance!

Re: Softcam Section

Posted: Tue Jun 04, 2019 1:01 am
by huck1991
I would like access to post in the Softcam section also please.

Re: Softcam Section

Posted: Tue Jun 04, 2019 6:32 pm
by Ivyman
I received the softcam keys back in March and have been tied up with an illness in the family and had not tried to enter them. I assume they are still good (Not sure how often they change), but I'm having trouble entering them. I would appreciate if someone could PM me the step by step instructions on how to enter them. :mrgreen:

Re: Softcam Section

Posted: Tue Jun 04, 2019 10:05 pm
by Feralkiwi
Added those above

Owen

Re: Softcam Section

Posted: Wed Jun 05, 2019 3:28 am
by mos
I am request 103w 3945 V 25000 please.

Thanks,

Re: Softcam Section

Posted: Wed Jun 05, 2019 6:30 pm
by cpr43
This post is to request access to the Softcam section!! Only to be able to post at the section. Softcam.key file request is here:

viewtopic.php?f=32&t=10267

Re: Softcam Section

Posted: Wed Jun 05, 2019 10:16 pm
by turcodbq
hola soy nuevo en este mundo recientemente he adquirido un gtmedia v8 nova me gustaria que me dieran acceso a la seccion softcam.key desde ya mucas gracias

Re: Softcam Section Access Request

Posted: Thu Jun 06, 2019 3:17 pm
by grig206
хочу получить доступ к softcam
4.8, 13, 19,

Re: Softcam Section Access Request

Posted: Thu Jun 06, 2019 4:20 pm
by jodon
Podrían añadirme a esa sección? Gracias

Re: Softcam Section Access Request

Posted: Thu Jun 06, 2019 7:23 pm
by gcbenjamin
Boa tarde!
Alguem teria as chaves do 58W 3920 H 30000, obrigado.

Good afternoon!
Someone would have the keys of the 58W 3920 H 30000, thank you.

Re: Softcam Section Access Request

Posted: Fri Jun 07, 2019 1:37 am
by jodon
After 10 posts they will grant you to post there and allow you to that forum.

Re: Softcam Section Access Request

Posted: Fri Jun 07, 2019 12:27 pm
by jodon
If I make a request to enter the Softcam section when I will know?

Re: Softcam Section Access Request

Posted: Fri Jun 07, 2019 1:28 pm
by jodon
Can I get in already? Thx

Re: Softcam Section Access Request

Posted: Fri Jun 07, 2019 1:29 pm
by jodon
Need the SC for NA/SA. 📡

Re: Softcam Section

Posted: Fri Jun 07, 2019 1:58 pm
by Vinca
Poderia me adicionar . Softcam Section Sul America.
satelites 43w, 40.5w, 47w, 55w, 58w, 65w , 75w , 84w

Re: Softcam Section Access Request

Posted: Fri Jun 07, 2019 7:50 pm
by jodon
Can I get the SC now? Please let me know. Thx

Re: Softcam Section Access Request

Posted: Fri Jun 07, 2019 7:54 pm
by tomas orellanos
Respondido SC Agradezca y comparta

Re: Softcam Section Access Request

Posted: Fri Jun 07, 2019 8:26 pm
by Feralkiwi
Added above

Owen

Re: Softcam Section Access Request

Posted: Sat Jun 08, 2019 3:38 pm
by Drahcir77
Hello everyone, how are you all, I am a new member. I have a V7HD and a V8 finder.
Could I please be added to the SC forum? Thanks in advance.

Re: Softcam Section Access Request

Posted: Mon Jun 10, 2019 10:01 am
by Feralkiwi
Added above.

Owen

Re: Softcam Section Access Request

Posted: Mon Jun 10, 2019 1:16 pm
by valcineibarros
bom dia poderiam me adicionar obrigado. uso aqui o v8 blue.

Re: Softcam Section Access Request

Posted: Mon Jun 10, 2019 9:12 pm
by Pangoleto
OK ya entendí: 10 post=softcam.key :mrgreen:
Y todo por no respaldar jeje.