v8 honor problem

V8 NOVA / V8 HONOR / V8 PRO2/V8 UHD / V8X

Moderators: admin, GTMedia Team

Post Reply
bohdan125
Posts: 5
Joined: Sun Mar 24, 2019 6:30 pm

v8 honor problem

Post by bohdan125 »

Hi, I have a problem with my tuner

v8 honor - worked for 1 hour after the purchase suddenly turned up and then the green diode went glowing

does not display channels
does not respond to the pilot
there is no picture and sound

User avatar
iq180
网站管理员
Posts: 1289
Joined: Thu Aug 11, 2016 2:55 pm

Re: v8 honor problem

Post by iq180 »

bohdan125 wrote:
Thu May 16, 2019 9:27 pm
Hi, I have a problem with my tuner

v8 honor - worked for 1 hour after the purchase suddenly turned up and then the green diode went glowing

does not display channels
does not respond to the pilot
there is no picture and sound
Can you get into the menu and see it on the TV, if not, hook up the RCA cables to the receiver and TV, it could be in PAL mode.

bohdan125
Posts: 5
Joined: Sun Mar 24, 2019 6:30 pm

Re: v8 honor problem

Post by bohdan125 »

It is not it
I checked it does not work
besides, it does not display anything on the display
I turn on the power and there is a green LED right away

User avatar
iq180
网站管理员
Posts: 1289
Joined: Thu Aug 11, 2016 2:55 pm

Re: v8 honor problem

Post by iq180 »

bohdan125 wrote:
Thu May 16, 2019 10:03 pm
It is not it
I checked it does not work
besides, it does not display anything on the display
I turn on the power and there is a green LED right away
Try and reload the software, get a fresh copy of the software and rename it flash.bin, turn off the power to the receiver and put the USB in the receiver, turn the power back on and start pressing the menu button, 10 to 20 times or untill you see the receiver loading the software, remember the receiver will not see the file if it's in a folder, it must be in the root of the USB.

bohdan125
Posts: 5
Joined: Sun Mar 24, 2019 6:30 pm

Re: v8 honor problem

Post by bohdan125 »

Hello
this way I was repairing v7.
unfortunately this option does not work in this case.
in v7 I found the soft in the moment when LOAD was displayed.
Nothing is displayed here
when turned on, the green LED lights up immediately

User avatar
iq180
网站管理员
Posts: 1289
Joined: Thu Aug 11, 2016 2:55 pm

Re: v8 honor problem

Post by iq180 »

bohdan125 wrote:
Thu May 16, 2019 9:27 pm
Hi, I have a problem with my tuner

v8 honor - worked for 1 hour after the purchase suddenly turned up and then the green diode went glowing

does not display channels
does not respond to the pilot
there is no picture and sound
Try another power supply on it, that green light mite be for low power.

bohdan125
Posts: 5
Joined: Sun Mar 24, 2019 6:30 pm

Re: v8 honor problem

Post by bohdan125 »

the problem is elsewhere. I have a v7 super v8 and v8nova tuner. I connected other power supplies - no changes.
problem probably in the softa that died
:!:

User avatar
Feralkiwi
网站管理员
Posts: 8342
Joined: Fri Aug 12, 2016 6:51 am
Location: New Zealand

Re: v8 honor problem

Post by Feralkiwi »

bohdan125 wrote:
Fri May 17, 2019 9:42 pm
Hello
this way I was repairing v7.
unfortunately this option does not work in this case.
in v7 I found the soft in the moment when LOAD was displayed.
Nothing is displayed here
when turned on, the green LED lights up immediately
Try the "flash.bin" recovery using the same software as was in the unit when it crashed.
You must use the honor software for the flash.bin file.

Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.

bohdan125
Posts: 5
Joined: Sun Mar 24, 2019 6:30 pm

Re: v8 honor problem

Post by bohdan125 »

it's not possible
soft even after the rs232 cable does not enter

Post Reply

Return to “GTMEDIA V8 SERIES”