V8 pro2
Moderators: admin, GTMedia Team
- cmelak
- Posts: 39
- Joined: Tue May 28, 2019 9:39 am
- Location: HD Box 7119, AB Cryptobox combo 752, GT media V8 Pro 2, 3 x LNB, 85 cm,
V8 pro2
Hello,
I bought yesterday V8 pro2. DVB-T2 tuner is very good, sensitive, but EPG has problems with Czech characters (letters) for example á,ž,í,é,ě,š etc.Are you going to fix this? Next problem is with diseqc's settings. I have 3 satellite (Hotbird 13, Astra 19,2, Astra 23,5). I can't assign correct port.
I bought yesterday V8 pro2. DVB-T2 tuner is very good, sensitive, but EPG has problems with Czech characters (letters) for example á,ž,í,é,ě,š etc.Are you going to fix this? Next problem is with diseqc's settings. I have 3 satellite (Hotbird 13, Astra 19,2, Astra 23,5). I can't assign correct port.
Re: V8 pro2
What version of software are you using?
Maybe check that your are using DiSEqC 1.0 setting , not 1.1.
I have not updated to this software yet as I've been busy.
Others have reported problems with dish positioners too, again a DiSEqC command problem.
Owen
Maybe check that your are using DiSEqC 1.0 setting , not 1.1.
I have not updated to this software yet as I've been busy.
Others have reported problems with dish positioners too, again a DiSEqC command problem.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
- cmelak
- Posts: 39
- Joined: Tue May 28, 2019 9:39 am
- Location: HD Box 7119, AB Cryptobox combo 752, GT media V8 Pro 2, 3 x LNB, 85 cm,
Re: V8 pro2
Hello,
I have last firmware. I checked DiSEqC settings in old STB (Fortis). I am preparing to set on GT media (maybe next monday). Bugs has EPG of Czech characters. Thx.
I have last firmware. I checked DiSEqC settings in old STB (Fortis). I am preparing to set on GT media (maybe next monday). Bugs has EPG of Czech characters. Thx.
Re: V8 pro2
If you want to assign your DiSEqC settings, you also have to pay attention to which inputs you have connected your LNBs to the DiSEqC switch.
Best regards pegasus07
Best regards pegasus07
Don Quijote for satellite systems
Re: V8 pro2
I installed the newest update 20190517 it will not work on the pro2 box DiSEqC will not find the sats says moving dish but dish is not moving, goes to wrong satellite, reinstalled the previous firmware 2019416, every thing went back to working fine.
Larry
- cmelak
- Posts: 39
- Joined: Tue May 28, 2019 9:39 am
- Location: HD Box 7119, AB Cryptobox combo 752, GT media V8 Pro 2, 3 x LNB, 85 cm,
Re: V8 pro2
I am going to try, 1st satellite is OK, 2nd and 3rd no.Very thx for all.
- cmelak
- Posts: 39
- Joined: Tue May 28, 2019 9:39 am
- Location: HD Box 7119, AB Cryptobox combo 752, GT media V8 Pro 2, 3 x LNB, 85 cm,
V8 pro2 - Youtube resolution and exact input of a satellite station
Hello all,
I try this morning youtube player. This resolution was horrible, how get better resolution (minimum 720 i)? I have another question: How get exact input of a specific satellite station?
DiSEqC is OK, no problem, works it. It was my mistake.
1)How use IPTV? I have not link...
2) Do you use SAT2IP on phone
3) After off receiver (on remote) and start receiver booting? Is it OK?
Many thx all
I try this morning youtube player. This resolution was horrible, how get better resolution (minimum 720 i)? I have another question: How get exact input of a specific satellite station?
DiSEqC is OK, no problem, works it. It was my mistake.
1)How use IPTV? I have not link...
2) Do you use SAT2IP on phone
3) After off receiver (on remote) and start receiver booting? Is it OK?
Many thx all
Re: V8 pro2
Ahoj,
Píšeš že si skúšal dvb-t2...
Mám otázku, dekoduje ti to cez cccam?
Ďakujem
P.s. iptv so skúšal, no vzdal som to, adresa musí končiť priponov "ts.".... kupil som na mesiac pripojenie, Filmy idú no ovládanie kostrbaté... Live tv ani tuk!!! Nenašiel som providera čo ponúka CZ/ak live s priponov "ts"
Milan
Píšeš že si skúšal dvb-t2...
Mám otázku, dekoduje ti to cez cccam?
Ďakujem
P.s. iptv so skúšal, no vzdal som to, adresa musí končiť priponov "ts.".... kupil som na mesiac pripojenie, Filmy idú no ovládanie kostrbaté... Live tv ani tuk!!! Nenašiel som providera čo ponúka CZ/ak live s priponov "ts"
Milan
- cmelak
- Posts: 39
- Joined: Tue May 28, 2019 9:39 am
- Location: HD Box 7119, AB Cryptobox combo 752, GT media V8 Pro 2, 3 x LNB, 85 cm,
Re: V8 pro2
Ahoj,
DVB-T2 funguje to je pravda, pokud jde o decoding DVBT2 přes ccam, nemám možnost vyzkoušet, myslím že u nás je to pouze v přípravě. Nicméně je to "globální" přístroj měl by to pobrat. DVB-S přes něj samozřejmě normálně chodí.
IPTV mě ani nějak neláká, párkrát jsem vyzkoušel Youtube, někdy nefunguje vůbec. Podle mě se za poslední měsíc s FW přiliš nezapracovalo. Celkové ovládání nic moc.
Docela používám rádio, myslím že by bylo dobré aby během přehrávání běžel screen saver, dám to diskuse.
DVB-T2 funguje to je pravda, pokud jde o decoding DVBT2 přes ccam, nemám možnost vyzkoušet, myslím že u nás je to pouze v přípravě. Nicméně je to "globální" přístroj měl by to pobrat. DVB-S přes něj samozřejmě normálně chodí.
IPTV mě ani nějak neláká, párkrát jsem vyzkoušel Youtube, někdy nefunguje vůbec. Podle mě se za poslední měsíc s FW přiliš nezapracovalo. Celkové ovládání nic moc.
Docela používám rádio, myslím že by bylo dobré aby během přehrávání běžel screen saver, dám to diskuse.
-
- Posts: 2
- Joined: Sat Jun 29, 2019 7:27 am
Re: V8 pro2
Any one know that this product support multistream 16apsk like satfinder v8
Re: V8 pro2
Do some reading aroung. Feralkiwi has talked about this with just a workaround.Aephoel245 wrote: ↑Sat Jun 29, 2019 7:41 amAny one know that this product support multistream 16apsk like satfinder v8
Re: V8 pro2
The V8 Pro2 does multistream sort of.
When you have the channels scanned in, go to one of the channels and then unplug the LNB cable for a moment.
You could also block the LNB at the dish for a moment so the signal is interupted.
I think that Freesat is not waiting long enough for the signal to lock before checking for multistream.
The unit will then open one of the streams, at random.
This is the only STB that Freesat has that opens multistream so far.
The new V8 Finder-Meter does multistream fully.
Owen
When you have the channels scanned in, go to one of the channels and then unplug the LNB cable for a moment.
You could also block the LNB at the dish for a moment so the signal is interupted.
I think that Freesat is not waiting long enough for the signal to lock before checking for multistream.
The unit will then open one of the streams, at random.
This is the only STB that Freesat has that opens multistream so far.
The new V8 Finder-Meter does multistream fully.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.